3 Most Common Problems with Gas Hanging Heaters

Подписаться 102 тыс.

Просмотров 47 тыс.

50% 1

Want to Learn more about Regulators, Gas Valves, and Natural Gas pressure coming into your building.
Watch This Video • Gas meters Gas pressur...
JOIN if you want more, need help or just want to support me.
/ @taddydigest
So in this video I actually go in the field and work on a hanging heater.
I talk a little bit about single wall vent pipe versus double wall vent pipe.
3 most common problems that I run into our bad thermocouple flew stopped up from usually birds and you have to take apart the inducer motor assembly because they usually end up in the wheel.
Also a bad gas valve.
#gasheater #heater #hvactrainingvideos #hangingheater

Опубликовано:

1 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@richardt2905 Год назад

Thanks man! great info, very clear info on double wall vs single wall and when to, and when not to, use. Appreciate the clarity/

@TaddyDigest Год назад

Glad it was helpful! Thank YOU for watching my friend. Have a Blessed Day

@TonyRodriguez-ok2ix Месяц назад

double wall u can touch, single wall hottttttttt

@outdoor044 7 месяцев назад

Hi, i have an old large hanging Reznor xa-250 propane. It has 2 large fans for blowing the heat and an inducer above them. The heater will kick on and blow heat as it should, but the inducer seems to run for a long time before the main fans kick on. Like it will run fow 4-5 minutes before the the main fans kick on.

@mr.purple1549 Год назад

I have a Sterling 45,000 btu garage heater. I used single wall stainless steel through a metal thimble(one part on the outside connected to the other part on the inside). This goes through the wall for horizontal exhaust. 1/4" per foot down to the outside per instructions. Heat caulk to seal. Length is around 5' for back pressure, again per instructions. Please your comment will be appreciated. Thanks

@jimnummerdor9687 2 года назад

Installing a unit heater in my garage this weekend. I see a note about a 11” to 13” water column needed between heater and regulator. Is this the same thing as a drip leg for moisture in the in coming gas line?

@johnwagner8465 6 месяцев назад

Great video..thank you

@TaddyDigest 6 месяцев назад

Glad you enjoyed it

@kapieters22 4 месяца назад

My pilot will ignite for just a moment and then goes out. I have a Honeywell Dayton older model. I believe I found the replacement igniter assembly online but it's marked NG for natural gas. I have LP. Can I still use this part?

@Eaglemade Месяц назад

why do you have to use double wall outside of the building..??does a propane heater exhaust need to go above a peak in the roof

@TaddyDigest Месяц назад

Once you're outside, you don't have to use double wall Unless it's an area where it can be easily touched Yes, you have to go above the roof so that the exhaust doesn't go in the soffit. Or gable

@user-or3vh6mt9p 9 месяцев назад

sterling gg60 propane hanging heater ( new ) makes a quick whoop sound after you hear the click when it fires up . pressure at outside regulator is 12 propane company checked that , Goes to black 1/2 inch black pipe to corrugated yellow flex pipe 5/8 outer diameter 1/2 inner with safety end ! why the quick whoop sound ? its not a whistle sound just a quick whoop works fine after that If you have advice that would be great . Would manifold pressure make it do that don't have gauge for that I think 10W>C> for propane

@TaddyDigest 9 месяцев назад

It's probably just the burner's lighting

@TaddyDigest 9 месяцев назад

Definitely get a gauge and check pressure.

@user-or3vh6mt9p Год назад

What venting do I need for venting for sterling ggo60 Cat 3 or double wall Great video ! Have a 24x30 pole barn only have 1and half insulation and 5 eights usb building tight building would you do a 60000 btu or 45000 btu live in ohio Thanks again

@user-or3vh6mt9p Год назад

installing cat 3 pipe and cat 3 thimble through pole barn wall osb inside then Dow Syrofoam board then metal pole barn siding Question 4 inch thimble how far from outside of thimble to combustibles 2 inches

@tregrad 8 месяцев назад

I have an old modine G75A and i cant find any info on it as it is very old, got it out of a mechanics garage who wasa going out of business, all looks very clean and the fan works very well. I just need to know how or get my hands on some info as to how it gets wired to a thermostat and maybe the wiring in total. I cant find a schematic or anything for it. Thanks in advance

@TaddyDigest 8 месяцев назад

Click to join button become a member I can walk you through wiring it up.

@lindengauthier4407 Год назад

I have a reznor garage gas heater. It works sometimes others it doesnt. Like ill try to turn up the thermostat and nothing then play with it back and forth for a bit then it will kick on. Is it likely the thermostat thats the issue. Cause when it works the heater blows nice hot air.

@TaddyDigest Год назад

Could be the thermostat but I really need to know more information to actually help you with this problem so if you want to join my RU-vid channel you can get access to my email and if you become a level 4 member we can get on a phone call and I can actually walk you through it Let me know here's the link Join this channel to get access to perks: ru-vid.com/show-UCuMyjTVlkM4xZ5z_eSyoB1wjoin Wanna Learn more about hvac? Check out my hvac tips for technicians playist. ru-vid.com/group/PLVjetZt5xgenmO76adHwb2ctyeBIFKUus

@rifsundergroundgrowmie2603 3 года назад

Same as water heater we get calls all the time to replace the thermocouple it's easy 💰😁

@TaddyDigest 3 года назад

yess Experience pays my friend

@INTERNA9 5 месяцев назад

Thanx

@TaddyDigest 5 месяцев назад

No problem

@Moe13292 6 месяцев назад

Ye my problem is that he pilot is lit but not the burners

@dginta7932 10 месяцев назад

Nice video, thanks. Any chance you would consider showing us how to install a Modine HDS (separate combustion model) with the horizontal concentric vent kit?

@TaddyDigest 10 месяцев назад

Yeah I can do that

@dginta7932 10 месяцев назад

Awesome. I just bought a Modine 45HDS (Separate Combustion) with the Modine horizontal concentric vent kit. Kinda figured it out but don’t want to make any mistakes, cause I have to go through corrugated metal on the inside of the shop and stucco on the outside. :)@@TaddyDigest

@donbredorouso2787 10 месяцев назад

Yes please, Im getting a reznor UDZ with separate combustion.@@TaddyDigest

@phillipverdin21 2 года назад

I have a hanging heater and the city came and said it was the regulator leaking. There was a strong gas smell. Does yhere need to be a regulator behind the gas valve

@TaddyDigest 2 года назад

Is this a residential or commercial building Is this your home Is it propane or natural gas Regulators can leak the diaphragm can leak and you need a new regulator if that's the case If it's propane it has to have a regulator

@phillipverdin21 2 года назад

Nat gas, garage/back of building, commercial

@TaddyDigest 2 года назад

gas company will usually set a meter with a regulator that goes from pounds to ounces outside the building ground level you only need a regulator behind a gas valve when a gas pressure to the building is more that the gas valve requires which should be 3.5 in wc which is less than 1 psi gas company sizes there meter for cubic feet per/hr and they are usually 40 psi in to regulator and less than inches of wc out to the building but if its 2 psi or more you may need a regulator before your furnace or heater I would check with the gas company to find out the pressure that is coming into the building I would be interested to know hope this makes sense here is a video that may help you let me know ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w6AjBw3loHg.html

@phillipverdin21 2 года назад

Ok ill check and let you know. I appreciate the concern and response

@TaddyDigest 2 года назад

your welcome Phillip

@rfenergy 2 года назад

what if the pilot flame stays lit but the main flames wont come on?

@TaddyDigest 2 года назад

could be bad gas valve

@camerong5349 2 года назад

Mine just started doing this. Is this usually the gas valve?

@jondoerr2652 2 года назад

How about flames come on for 3-5 minutes then go out?

@TaddyDigest 2 года назад

could be tripping limit switch bad or dirty flame sensor

@stormproofconstruction148 Год назад

I used b pipe. Double wall and it still gets hot.

@TaddyDigest Год назад

Make sure you check the gas pressure

@Proflexme Год назад

I installed a hanger heater in my garage. The single wall pipe off the back gets very hot but the B pipe seems to be ok and not as hot as the single wall pipe. That is normal?