3 Must Have Upgrades for Your Husqvarna Lawn Tractor 

Excellent video. I appreciate your clear instructions, no unnecessary chatter, music or side jokes. Thanks for taking the time to make these videos to save me so much time!

Sir, your videos are so helpful. Your production of them is spot on: No annoying music; everything in focus; perfect audio levels, clear & concise instructions...the list goes on. Thank you for making these.

Excellent video, I found it because I picked up a cheap 22v46 unit from local fire dept and needed to fix some issues. Had a suggestion on the part about installing a rear link on the deck on the right side as well. It is a great solution to the design flaw of allowing only left side to be adjustable. However, even after the link is installed, the deck is still quite low, even on the setting of 6, even when the nuts are tightened to the top of the threads. A solution to this is inserting a 1" bushing ( a cut section of 3/8 iron pipe works well) above the nut on both sides. With this the nuts can be tightened to halfway, with a leeway of adjustment on either side. Also at that level, Setting 3 or 4 gives a mild cut, 2 gives a moderate cut and setting of 1 a very low cut, almost scalps. With 5 or 6, the deck is pulled up to its highest level possible and travel without mowing is very good and tight and rattle free even over bumpy ground. You also would need to tighten the front nut as well.

As far as trying to raise the deck( also for ease of loading on trailers) I would like to find someone who has gone to a bit bigger tire/wheels size. I have my deck raised as high as it will go without throwing a belt, and I barely get a 3" cut! Not many riding mowers achieve 3" cuts, go figure. I also have the YTH22V46 Husqvarna. I also have used the two bagger system for mowing and vacuuming grass clippings with previous mowers and saw a triple bagger this time during the purchase of my tractor and after I mounted everything to a perfect fit and function, I saw that the triple bagger is for the 48" + mowers. I had no difficulties mounting and using that bag system on my 46" and it's great going that extra distance without stopping to empty a bag often.... I'm glad I accidently found this out. Generally 2 baggers are for 46" and less while triple baggers are for 48" and more. Hope this helps anyone.

I just added that 2nd adjustable mower rod to my Husqvarna. I couldn't find any online. However, the dealer had one for under $15.00. They laughed when I said I saw one online for $40 but they were out of stock. I gained a 1/2" in height, however, it's better than nothing. All mowers should have the capability to cut 5" or higher in my opinion. Some times you got to go into the weeds!

That mower is exceptionally clean for being two years old

Hello Sir. I recently purchase a property and it came with the same model lawn tractor. This has been the most thorough and easy to follow step-by-step tutorial. Thank you very much and be well.

I am so glad I found this video!! I have not been able to get my deck level on my Husqvarna lawn tractor. I have the one side adjusted all the way out and it will not level it like it should. Glad to know that i can order and adjuster for the other side. Great job on the video and thanks for sharing this.

Very informative. I have been working on my Moms 2011 Husqvarna YTH2348. Still runs great. You are giving me ideas. Thanks!

Nice upgrades.

Great upgrades 💯👍👍👍!!!

After going through multiple bearings and finally destroying the inner bore of the rims, I bought new rims and went back to bushings. The single row ball bearings cannot handle the side loads from turning. Bushings handle more load and work great if you keep them greased.

Great job! Fun to watch !

Thanks to the bean counters, company's always make things cheaper while they charge more for it! The mower height problem is obvious, these machines need larger diameter wheels, but that cost them more!

That.pre fliter is a great idea to keep the paper filter nice and clean the discharge side of the mower deck needs to be the same height as the trim side plus the Ball bearings for the front wheels make them roll much better than the.bushings I even installed the poor man steering kit on my craftsman ys mower and the.poulan XT mower

These machines are always squeaky clean, look barely used or brand new. Anyway, great videos that are really helpful.

Very well done. Thank you.

Great video Mr Johnson , I for like to repair my things house, cars,trucks, garden machines. I think your a professional at what you do. I starting to wear down a bit as I’m turning 76 this month and still trucking long haul . Good I like hat I do, as what you too. Thank for your fantastic videos

New sub here. Your videos are the best! I don’t subscribe to channels very often, but yours is worthy of my time! 👍🏻☮✌🏻

Just want to say how much I enjoy your videos. I've subscribed to your channel and I always Like your videos. Appreciate you and your channel. Thanks, D Hughes, Arkansas.

Good job !

You will be lucky to get parts for those in the next couple of years

Can you do a “Video” on maintenance on a husqvarna hydrostatic transmission? New to your channel and absolutely LOVE IT!👍

Good morning. Just came across your video and enjoyed it. You mentioned about adjusting a mower deck on a john deere? I have a john deere LX 178 with a piranha 42” deck and love my tractor but has allways cut really low and wanna know how i can fix this problem? Also have a 160 with the same problem! Thank you for any advice you can give me! Have a good day

Hi Jhonson I watched your video it's very informative. But my question is you can fix my lawnmower it has same problem it want start. I change battery. Please let me know. Where is your work shop?

Can you do the bearing upgrade on Cub Cadet XT1?

On the video, the wheel bearings looked like they were sealed bearings which won't take grease. Were they ?

Absolutely love your videos, Sir! Quick question though...you flashed across the screen NOT to wash your machine? Washing is quicker, for sure. However, the extra time it would take to wipe down the entire machine after a long day...I dunno, lol. Any suggestions? Thanks! ***Liked and Subscribed Viewer***

Another desirable upgrade is to insert 2 slender washers and a torington needle bearing washer between the front axle and the steering knuckle. It reduces turning effort required. My problem is keeping air in the front tires! I removed the wheel assembly, aired them up leaving the stem cap off, and submerged them completely in a water bath. After 3 minutes, I still did not see a single bubble from either side, yet the tires go flat after 2 days of inactivity.

Hi Brad, thanks for the B&S pre filter part #. I have a JD S-120 with a B&S 22hp. I'll use this as well. Any upgrades for my type of tractor? Thanks again.

i need an upgrade for the mowers hood. A yt3000.I will open it to expose the engine.. fill the gas tank, and it falls shut.. anything ?

I used your Amazon link for the "roller bearings" without doing my due diligence. They came not as bearings but as bushings. Got another part number I can use? YTH22V46 mower. Thanks!

What about no springs under the seat?

Thanks for a great video. I have a 9 year old Husqvarna 48in and the deck has the leveler hangers on both sides. My question is my highest setting 3.5 is too high and my next setting 3.0 tends to scalp sometimes because my land is somewhat bumpy 2.5 acres. Can I move the height to get a slightly higher cut by adjusting the levelers up a few threads?

Would you happen to know if the Adjustable Mower Deck Hanger will work on a YTH22V46? The part description says it works with a YTH2246 and I don't know if there is a difference between the two mowers.

Are u using 2 or 4 adjusters for deck height

10:28 When those spindles wear, & I've have had some wear very bad you can replace those bushings with PLASTIC bushings, the plastic bushings are longer and will cover MORE of the spindle length than the worn area thus allowing you to NOT have to buy new spindles.

I will probably run mine til the wheels fall off ! LMAO 🤣😂.

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

curious why would you grease a sealed bearing?

Should rear wheel bushings be replaced with bearings also?

What is the part number for the wheel bearings, JD on a Husqvarna?

Do you need to grease with the bearings

First upgrade, my lawn 😂

The lack of right side deck adjustment is dumb.

Good afternoon Brad I'm Brendon I don't know why Husqvarna only puts 1 adjuster on their decks they should put 2 adjusters so they're decks can cut nicely like they're supposed to

my mower deck belt smokes, any info?