@@outdoorsinoregonI had trouble getting the grease caps back on so I made my own with large electrical shrink covering and 3/4 in. nipple with a cap. Works really well and easily put together! Again, THANX. 😊
This worked great! I added these needle roller bearings and combined it with a steering wheel knob. Steering is much easier and I really notice a significant difference.
As a Husqvarna owner, I find it amazing how cheaply mine is made. I have YTH24V54. I have had to build my own frame for it as mine was so thin it cracked in 4 places. I did the power steering fix two years ago as well as the ball bearings in the wheels. My right front wheel bushing wore out in less than a year and it wallowed out the wheel itself! The steering arms have bent, and that is just from driving it. I have never hit anything with them. My terrain is uneven but not grossly so. The only thing good about my mower is that the Briggs and Stratton engine always starts! I will never buy another Husqvarna.
Thank you for the comments. I have seen reports of cracked or bent frames, mostly related to front attachments. I've had some minor electrical issues with mine, but no mechanical issues at all.
I have the same mower, and it's a 2007 model. I've had none of those issues with it. I've not even had to replace a blade spindle. It has about 375 hours on it and is still cutting great.
I added the bearings to my Husqvarna TS-348D garden tractor. The steering effort was reduced from a real struggle to being able to steer with 2 fingers. Thanks for the info! This will help my old arms and shoulders. The dust caps are now loose and I will have to find a way to hold them on.
The wheel bearing conversion will be my next upgrade; a lot of people seem to have good results with the bearings. By the way, you can get replacement dust caps on Amazon: amzn.to/3VVtZwe
I did this on my J. Deere X320 recently. It had a 1/2" thick Plastic bushing on the spindle beneath the Axle Beam. I don't believe all JD tractors have this bushing. New bearings were $8.50 for 2 on Amazon. $73.00 plus tax at J.D. dealer! I installed the needle bearings after carefully greasing them. The needle bearings are also called Torrington Thrust Bearings..They fit well. I NOTICED NO DIFFERENCE AT ALL in Steering Effort. Very disappointing.
Interesting; I wonder if the plastic bushings create low friction contact similar to the roller bearings. Mine was difficult to steer at the start; there was a lot of down force pushing on metal-to-metal contact before installing the bearings. So, there was a noticeable improvement with the bearings in place.
@@outdoorsinoregon I believe the Plastic Bushings serve the same purpose. I have always jacked up the front end prior to greasing the spindles so the grease can get where it is needed.
Wouldn’t those bearings get a lot of dirt in them? I know when mowing my yard, and the previous place I had too, there would be a lot of dirt kicked-up when mowing. I’d think the dirt would ruin them pretty quickly, but who knows.
@@Mrsteve4761 It's been a year so far without issue, but we'll see how long they last. As they wear, it won't be any worse than what was there before (a washer), and replacement is cheap and easy. So, low risk in my opinion.
I've got the YTH18542 my steering slips and always feels like it's about to break something. I'll try this, but is there any other part that wears easily? Mower's probably 5 years old.
I would start by inspecting your steering gear components. I've noticed moderate wear on my steering gear and others have mentioned this as well. They sell steering gear and steering shaft rebuilt kits for most of the Husqvarna tractors on Amazon.
Next Video how about one relating to a seat upgrade? Don't understand why other mowers have springs and all Husqvarna has is the 2 rubber pegs that make it feel like your riding a mechanical bull. Just a idea for a upcoming video. Thanks
Well, I wouldn't be able to do that video because my seat already has springs as you can see from my review of this tractor: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dQnnR0Kzs9w.htmlsi=gW2yH75Q3328Z2Vp&t=504 I'm guessing the holes all line up and you can probably buy a garden tractor seat and bolt it in place of your current one.
Dear Sir, we want to put the link of our products(AXK2035)under your video,we can send you products for free and we will give you the corresponding compensation.
I have noticed this on mine as well. I think the steering gear is not sufficiently robust considering the weight of the larger garden tractor engine. The gear wear is noticeable, and it's one reason I did this roller bearing upgrade in hopes of extending the life of the gears.
I didn't notice much difference when I did mine like that. I guess greased bushings are pretty much just as smooth as bearings, but will help the shaft last longer.
He rolls differently . ☺️ There are various perspectives of videos on maintaining mowers and lots of other stuff on RU-vid . I like that I can search videos till I find one with a the teacher that I relate to. The different perspectives available on RU-vid also gives me easier ways of applying steps to add or delete to teach me to work on or upgrade my mechanical “stuff. I proudly tell my local friends that I’m not ASE certified. I am a RU-vid certified mOchanic . Be blessed.
