No video :(

3 Petri experiments with Alcohol Inks

Подписаться 30 тыс.

Просмотров 11 тыс.

50% 1

Welcome to more Petri Experiments! They are so addictive and pretty! These beautiful small creations can be easily framed in shadow boxes and be hang on the wall.
***Safety is another topic I will be talking about soon in a video, but until then, I recommend everyone to wear a respirator, nitrile gloves, an apron or lab coat, and use resin in a separate room from the living areas and well ventilated so that your family members and pets don't breathe the paints and resin while it's curing.
Here is my respirator:
3M Ultimate FX Full Facepiece Reusable Respirator FF-402/89421, Respiratory Protection, Medium (fits 80% of adults)
amzn.to/2Gr7qp4
AND Organic Vapour Cartridges: amzn.to/2Jugm3t
MATERIAL USED:
(***US LINKS***)
Heat Gun: amzn.to/2tmTs4d
Art Resin: amzn.to/2hwvkZ9
Jacquard - Piñata Alcohol Inks - White, Magenta, Black, Blue : amzn.to/2H1NUjK
Lakeshore - Salmon: amzn.to/2oPxcg3
Nature Walk, Stream: amzn.to/2oESpdc
Summit View, Yellow: amzn.to/2FQ3OhY
Silicone Mold: amzn.to/2tmjDKJ
BLICK also has an amazing selection of Piñata, Tim Holtz and Copic Refill Inks at GOOD PRICE!
shrsl.com/yxva
(***CANADIAN LINKS***)
Art Resin: amzn.to/2koxxV1
Heat Gun: (Dual Fan Only) amzn.to/2C4hWle
Jacquard - Piñata Alcohol Inks: amzn.to/2FaWHDD
Lakeshore - Salmon: amzn.to/2FP5sAb
Nature Walk-Stream: amzn.to/2oGPbGt
Summit View, Yellow: amzn.to/2F7mV9Y
Silicone Mold: amzn.to/2oWN68H
👕❤️👚 Arijana Lukic Merch (T-shirts) 👕❤️👚: amzn.to/2ILbuXz
**MUSIC: www.bensound.c...
***DONATE****
If you would like to support me in creating my videos and my art, you can donate any amount you desire through Paypal. This will help me buy the supplies to make more videos. I am a full time artist and trying to get out there with my own creativity so any support is definitely appreciated. I truly hope that over time, I can make a decent career with my artistic talent and learn to perfect my art & design! I may in the future open a Patreon account, but for now I only have PayPal!
Thank you so much!!!
www.paypal.me/...
Website: www.arijanaluki...
Instagram: / arijanalukic_art_and_d...
Facebook: / arijanalukicartist
Mailing Address:
Arijana Lukic Art
2317 - 90B Street SW
Edmonton, Alberta
T6X 1V8
Canada
***Disclosure: Some of the links above are affiliate links, meaning, at no additional cost to you, I will earn a commission if you click through and make a purchase.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@kjb1801 3 года назад

Just beautiful

@ZAGAL5134 2 месяца назад

Merci pour le partage 🌺🙏

@yayaglass 6 лет назад

Lovely! I appreciate the different techniques! My Fav is the 'Sea Flora', love the movement of the white wisps. Way to go!! Karen

@ArijanaLukic 6 лет назад

YaYa Studio thank you Karen! That one truly reminds me of scuba diving :)

@secretsquirrel7374 4 года назад

Thank you for the inspiration, I will give these methods a try next time. They are beautiful and I love the colour combinations you used ❤

@ArijanaLukic 4 года назад

Thank you :) Enjoy experimenting

@suekruger8525 4 года назад

Very nice do you fill the mould right up to the top with the resin thankyou

@murphydtx 5 лет назад

Gorgeous work. Thank you for sharing the processes.

@ArijanaLukic 5 лет назад

Thank you!

@jerrycallender6318 5 лет назад

More beautiful art. Also like the video with the 6 Petris (2 molds).

@ArijanaLukic 5 лет назад

Thank you so much!

@MonaHarrisVlog 6 лет назад

Beautiful art... -From Dallas, TX USA

@ArijanaLukic 6 лет назад

Thanks!!!!

@charliemattox1208 6 лет назад

very beautiful

@ArijanaLukic 6 лет назад

Thank you!! :)

@furniture11 5 лет назад

Gooood

@kendude8089 5 лет назад

Pretty! 💖

@ArijanaLukic 5 лет назад

Thank youuu!

@aleksandrbashkatov1958 6 лет назад

всё очень красиво!!!!!

@ArijanaLukic 6 лет назад

Thank you!

@diankapours6214 6 лет назад

On an earlier video you said you wait 10 min before adding the ink, why is that? And why do you only use pinata white and not Tim Holtz white, is pinata better?

@ArijanaLukic 6 лет назад

Hi Diana, you can drop the inks strait away in the resin or wait few minutes to let the resin settle a little so it's not so runny. Sometimes, depending on the interior conditions, your resin can be a little runnier and the inks can sink deeper when you drop them. The solution for that is to give it few minutes before you drop the inks so the resin has the time to start curing a little (getting thicker). If you see that your resin is already thick (from experience), you don't need to wait at all. But to be honest, I do all of those things and get marvellous results and also different from each other. Over time you can see what you like and maybe stick the same process, but I love to try it all. For the White Piñata, from all my research, the density of the piñata is perfect for this project. I actually did my research before starting these and never even bought Tim Holtz one because I never had the need. The white pigment is heavier than other colours and pushes the other colours down in the resin and works well. Maybe one day I will buy Tim Holtz white just to experiment but lots of people say that it isn't as effective. Thanks for watching! I am posting a new video on Sunday :) :) I made 3 projects in 1 video and different molds :)!

@lindalmiller429 6 лет назад

Lovely

@ArijanaLukic 6 лет назад

Thank you! I think my favourite one is the Grey/Blue, although I love them all :)

@fuzzypiglet 6 лет назад

Amazing ❤️❤️❤️

@ArijanaLukic 6 лет назад

Thank you!

@deborahol 5 лет назад

Gosh they're gorgeous 👌. Does resin give off toxic fumes when curing? Also, whenever I've tried alcohol inks, I'm so heavy handed when squeezing and end up putting too much in. How do you manage to be so precise with yours using just one drop at a time? You're so gifted I love your channel

@ArijanaLukic 5 лет назад

Hi! Thank you :) I have no idea how I can be so precise with the drops :) I guess patience! I use a respirator (full face) when I work with resin. It does have fumes when it's curing. I close the door and do it in a resin designated room.

@deborahol 5 лет назад

@@ArijanaLukic Aww thank you for replying 😊. Ahh right, very wise then having a designated room, I didn't know that about the fumes. The inks yeh, good patience and a steady hand is definitely needed. I'd love to make a few as good as yours, they're just so lovely to look at, mesmerising. I bet they look amazing as wall hangings too. I could watch loads of videos of just these I love seeing how you do it. The colours you put together are always beautiful too!

@ArijanaLukic 5 лет назад

I guess let yourself do trial and error. As long as you make them, you will end up with something AMAZING. For the colours, I never pick them in advance. I am a spontaneous person that likes to mix colours in the flow. I have about 60 inks beside me and I just pick the combo before dropping the inks :) It's fun! I find that best combos are contrasting colours. :)

@deborahol 5 лет назад

@@ArijanaLukic Yeh I agree, you just have to go for it sometimes don't you. You're definitely doing what you were born to do, all your work is phenomenal ❤.

@LilmizzMarie 6 лет назад

Love these they are beautiful! What kind of resin are u using if you don’t mind me asking?

@ArijanaLukic 6 лет назад

I use Art Resin. I tried another brand for 4 weeks and I hated it, so Art Resin is the only one I use and used 95% of the time. There are other choices too depending if you need a resin that is more heat resistant and stronger. In this case you can try Countertop Epoxy www.countertopepoxy.com/ or Faux Rizzle artresinfauxrizzle.com/ If you are making artwork that won't be handled a lot, but displayed only, then Art Resin is fine and it's pretty forgiving when mixing. The molds I buy I never ever had to use a release agent. I buy silicone only and none of them broke until this day. If your resin sticks to the mold it can be caused by wrong measure of resin to hardener or using too much heat to pop bubbles? Or just a bad mold? I guess more details are required to determine the issue but for sure the molds have to be made of Silicone only and have a shiny surface inside so that you get the see-through effect. Matte ones are ok too but then you have to coat the object with another fine coat of resin again to get to see-through or resin will be matte when it cures. All the links to the molds I use are in the description of each video. I will be posting new ones soon as well. I hope this helps!

@LilmizzMarie 6 лет назад

Arijana Lukic yes thank you so much! I’ve used art red for the past year and just switched to pro marine and I had this exact mold. I’m pretty sure I used to much heat I wasn’t aware it could effect it and I was torching to long I have a silicone mold I got from the store that I might try! Thanks for all the info and the links!!

@AbsoluteMiniacGena 5 лет назад

Can u tell me if you’ve ever added glitter or other things to the moulds when making Petri’s with Alcohol Ink? I’ve never added anything else as I fear wasting resin/ink which is very expensive to me BUT I am curious what else to do.

@ArijanaLukic 5 лет назад

I never used glitter, but you can. I would just use it sparingly. They can have tendency to sink at the bottom... so maybe pre-mix glitter with resin first? Or with the colour.... I am not so much into glitter for petris, so I never tried. :)

@claudiocosta8391 6 лет назад

teria como você colocar uma legenda para nós que somos do Brasil?!

@ArijanaLukic 6 лет назад

Obrigado pela sugestão! Eu acho que é uma boa ideia e é uma possibilidade no futuro! Agora eu tenho muito trabalho e não tenho muito tempo para executar isso. Se você tiver dúvidas específicas, por favor me avise e eu posso tentar responder. :)

@Kailna 6 лет назад

How do you prep your molds? Are they simply cleaned, or do you use some form of releasing agent in them before pouring?

@ArijanaLukic 6 лет назад

Hi Kelsey, I spend some time cleaning my molds before pouring simply by using rubbing alcohol. I always buy silicone molds and had no problem with them at this point. I don't use release agents at this time.

@Flower-ux4cz 6 лет назад

😍

@Simplyalisonwagner 5 лет назад

How do you know when to stop adding ink??

@ArijanaLukic 5 лет назад

Simply Alison i just know... :) You watch your resin and you get the feel when to stop. But good rule of thumb is 3-4 rounds of colour and 3-4 of white. Experimentation is key. You may like less ink or more, that also depends on you.

@Simplyalisonwagner 5 лет назад

@@ArijanaLukic I appreciate you and answering me. I get my resin in a couple days and I'm just so excited!

@brunaschmitt472 5 лет назад

Hi! can I use a hair dryer instead a heat gun?

@ArijanaLukic 5 лет назад

The hairdryer isn't heating enough for the bubbles to pop, plus it is too strong and would spread your resin around. A HEAT GUN is the key tool to own if you want to play with resin, and a torch too (but I don't recommend the torch with silicone molds.)

@brunaschmitt472 5 лет назад

@@ArijanaLukic ah ok! I understand now. Thank you very much for your help and congratulations for you beautiful work. Wish you sucess!!!

@ArijanaLukic 5 лет назад

So sweet! Thank you!