3 Phase Hybrid Inverter

Подписаться 154 тыс.

Просмотров 35 тыс.

50% 1

This is a simple demonstration of the Sunsynk three-phase Hybrid inverter wired in parallel.
Warning these inverters work on HIGH VOLTAGE and must only be installed by licenced electrical Engineer.
The inverter can operate off-grid or on-grid with perfect phase rotation. Note the software version shown in the video has since been upgraded to add even more features. #Sunsynk 3 Phase, # parallel, #hybrid.

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@a.utility.supplier 3 года назад

Awesome!

@alcaponemafia Год назад

wow that was the best setup of 2 inverters i have ever seen. All the wiring just magically connected itself to the 2 inverters. The other stuff lying around must have had something to do with the installation but for the life of me i have no frikking clue what you did and how you connected it up. You really need to do proper videos with more sensible detailing and explanations.

@houseofancients 3 года назад

awesome

@Xxxcappie23 2 года назад

Good video as always But Are these regular inverters or are they specifically 3 phase inverters ?

@raeezahdavids4747 Год назад

How do the coms work and where is it plug in on the master and slave and do the dips has to be changed on the 2 3phaze inverter in parallel

@stefpen3176 2 года назад

our electric supply is 230v 3 phase ; can i use a transformer to step down the 400v output of the grid to 230v 3 phase?

@antonbester8341 2 года назад

If you parallel 4x 12Kw Sunsynk 3 Phase inverters can you integrate the generator

@johansegernas 3 года назад

Are you using the load output port for this? I'm having some trouble grasping how anti-islanding and power grid outage with UPS functions works together, is it only possible when using load output port?

@MrTrevordo 3 года назад

Can you tell us what happens if you loose one phase on the grid side, quite a common problem is SA. Is it possible to charge the battery using the remaining 2 phases and then provide 3 phase power from the battery or will it just ignore the feed until it sees 3 phases and run on the battery until it’s flat?

@cjdebeer4581 2 года назад

Gaan offgrid

@shoaibamod6101 Год назад

Any update regarding this question?

@julioruiz4288 2 года назад

What smart meter are you using for the ESS funcion?

@andremalan2849 3 года назад

In the spec sheet it states a max continuous AC passthrough of 60A. Could you maybe explain what is meant by this. I guess it means that 60A may passthrough to the ups or load side of the inverter from the grid if available. would it be correct to say that if the grid is available you can pull the 60A plus the output of the inverter on this load side?

@cjdebeer4581 2 года назад