3 Types of Missed Approaches | Missed Approach Points | IFR Training

Подписаться 180 тыс.

Просмотров 30 тыс.

50% 1

The missed approach point on an instrument approach can be identified in a number of ways, depending on the type of approach and different navigational aids used. We'll look at missed approach points on an ILS, as well as two different kinds of VOR approaches.
Ready for IFR Ground School? Join us at flight-insight.com/ifr

Опубликовано:

11 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@vhscampos1 Год назад

Thanks for another great video

@19ij Год назад

Great job! Very useful.

@rayhoese6736 Год назад

Great explanations!

@mattsullivan2247 Год назад

Great content as always

@jakew9887 Год назад

Excellent presentation. Thanks

@cyrouskhavari969 Год назад

when I got my IR in 1978. not only I flew the airways, using VOR'S . for navigation, or ADF.. never used GPS.

@Airbus32040 Год назад

Thanks💞💞

@aviatortrucker6198 Год назад

If you increase your indicated airspeed by 5 kts to make it 95 kts you now become a category B aircraft. This could change your minimums. The best way is to make a small chart for your off ground speed amounts. I used to have a chart for ground speed of 65, 75, 85, 95 ETC. you take your indicated airspeed plus or minus the wind and divide by 60. This will give you miles per minute. Take your distance to travel divided by your miles per minute and it will give you the time. If you maintain 90 kts indicated as the example with a five not headwind, (85 kts ground speed), you should fly to the missed approach point in approximately four minutes and 15 seconds. Remember unless you have a good true wind speed you’re going to be off your ground speed by a few kts. By the way, any ground speed time can be calculated using the E6B or any flight computer.

@yukok2089 9 месяцев назад

Aren’t categories based on Vref or VSo x 1.3

@krisztinaholly 6 месяцев назад

@@yukok2089Nominally yes, but if you fly faster you use the minimums for the higher category. But I think what avistortrucker is referring to is the FAF to MAP times, which are an estimate to the missed approach point on a non-precision approach. A strong headwind could get you coming up short, or a faster than normal approach could get you missing the runway threshold altogether. I hadn't thought of interpolating those times, I just try to stay close to 90 kts, but maybe I should.

@user-uy9le2cg3b Год назад

the best as alawys

@richg3555 Год назад

Nice presentation, but no information on CDFA missed approach points

@qotsacovers6115 Год назад

For ILS, I cant decide to discontinue the approach and go around earlier due to loss of obstacle protection or other traffic flying outbound to intercept the final approach course, am I right? But isnt it so silly lets say DA is 200 ft with 3.00 angle ILS and Im inbound at 3000 ft, and for whatever reason I have decided to go around (failures, any other operational problems or anything else really) do I still have to pointlessly descend down to DA which Im already going to be climbing out of, following glide slope and then start the MA?

@M4dg04t Год назад

AIM 5-4-21(b): "However, no consideration is given to an abnormally early turn. Therefore, when an early missed approach is executed, pilots should, unless otherwise cleared by ATC, fly the IAP as specified on the approach plate to the missed approach point at or above the MDA or DH before executing a turning maneuver." If the MAP does not have a definite fix on the plate you need to reasonably approximate it. So, no, you don't need to descend to DA.

@qotsacovers6115 Год назад

@@M4dg04t Thank you

@mikearakelian6368 Год назад

Then don't fly

@aviatortrucker6198 Год назад

If you decide to terminate your approach for any reason you should maintain heading and climb to to first altitude required before the turn. Next follow the missed approach procedure at that point. Of course first advise ATC you are executing a missed approach. If you approach is not a straight in or you executed a circle to land and lose visual sight, a general safe maneuver is always turn toward the runway to climb back to the initial missed approach altitude before preceding to the hold. You should know your MSA and can get vectors from ATC and state your intentions.

@JotaFaD Год назад

At 5:00 Why aren't cross radials used to identify the map?

@johnopalko5223 Год назад

The procedure designers decided it wouldn't work, for one reason or another. Perhaps reception of the second VOR was unreliable at the MDA or, perhaps, the radials crossed at too shallow an angle.

@milimuller3348 9 месяцев назад

As a flight sim noob I can say with confidence that my missed approaches happen about 100 feet in the middle over the runway 👍

@mikearakelian6368 Год назад

Going to sleep....

@johnfitzpatrick2469 Год назад

I hope the satellites the provide the global positioning system don't have a bad day! Pays for an accurate altimeter. 🦉🛩️📏

@glennwatson Год назад

GNSS/GPS receivers have detection of dodgy satellities using a system called RAIM. If you get a RAIM error while on approach you have to abort the approach and then try using another aid or go to a alternate airport. Some GPS receivers devices can also detect which satellite is causing the issue and remove it from its positioning. There are aids that will tell you relative position to the runway that don't rely on satellites such as VOR or NDB. I know in Australia if you are flying commercially you have to have support for additional aids. Interestingly the airliners also usually have a system which is older than GPS called the Inertial Reference System (IRS) which uses gryoscopes to keep track of turns/movements of the aircraft and therefore keep track of the location of the aircraft without the use of external aids.

@aviatortrucker6198 Год назад

@@glennwatson In short, you should always pray for RAIM!