3 types of valves and how to install/remove them (full video in description box)

Подписаться 585 тыс.

Просмотров 1,4 млн

50% 1

Join my plumbing forum for FREE!
got2learn.freeforums.net/
FULL VIDEO: • How To Remove/Install ...
If you have a leaky shut off valve, whether it's COMPRESSION, SOLDERED or PUSH FIT, here's how to remove and install a new one the CORRECT way!
Stuff I used in this video from Amazon:
Compression sleeve puller: amzn.to/3xD050e
1/2" drill brush tool: amzn.to/3jIV5SR
Bicycle wrench kit: amzn.to/3CzRu2f
Sharkbite depth gauge: amzn.to/2VAHqFK
Soldering heat shield: amzn.to/3F8SJWA
Pencil reamer: amzn.to/2tBuhKW
All-in-one deburring tool: amzn.to/3B9dLUv

Опубликовано:

19 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 236

@Got2Learn Год назад

FULL VIDEO:

@jonathanlanglois2742 Год назад

In Canada, I'm quite certain that soldered bronze valves on copper pipes are what you'll find in most homes, but the industry is definitely changing. There's a lot of pex pipes being installed in newer homes.

@devinhall1631 Год назад

Becareful of shark bite valves . Can be hard to get them to seal and if touched they can leak and 4-5x the price

@mikec-hamilton Год назад

Plumbing 101. Thanks for all these videos

@SBS_Auto Год назад

Best shut off valves imo. 11 year plumber

@joshuamoore24_7 Год назад

I put a little bit of water piping thread sealant on the threads of the angle stops after cleaning the pipe with sand paper or Emory cloth. An old plumber taught me a trick of using an in reamed 5"-6" piece of 3/4" pipe to remove the dry dry wall mud from copper 1/2" water pipe stub outs and it works great. Plus you want the pipe in the angle stop fitting all the way untill bottoms out the tighten over the Farrell.

@ScottWConvid19 Год назад

Your videos are going to help me out a lot when I have to change out my earlier mistakes. Thanks man

@arisacharya4895 Год назад

What about threaded screw on valves? I think people tend to forget about these as they are less common.

@TheDriveInGuys Год назад

This guy sounds like every customer service phone operator I've ever spoken to!

@joshuamoore24_7 Год назад

Compression angle stops are the quickest and best, nowadays 1/4 turn on/ off ones are the most common. But they still sell the regular ones that take a few turns to shut on or off.

@charliebaker1427 Год назад

Compression fittings are not typical in most homes stateside

@brendenbaker8397 Год назад

What about crimped pex and Q & E (wirsbo)?

@edwicks Год назад

I work by the 1 and done rule ! No callbacks , no comebacks !

@trey_ironside Год назад

Compression Fittings are the best if all

@danielgoetz7821 Год назад

I prefer compression fittings over sweating and bringing up the rear is shark bite fittings.

@TheBigRagooDOTcom Год назад

That tool is a game changer

@kelsycunningham8452

Compression fittings for the win.

@seanabbott3992

Compression values are the bane of my existence. When I run into one it's been there forever so turning the valve off makes it leak and the compression ring never wants to come off.