ASMR Soldering Lead Free Valves (1" and 2") | GOT2LEARN

Подписаться 585 тыс.

Просмотров 48 тыс.

50% 1

Amazon affiliate links to all the products I used in this video:
AutoCut Pipe Cutter 1/2": amzn.to/2XlyqAn
AutoCut Pipe Cutter 3/4: amzn.to/3gPmhhz
Superior Tool 1/2" Cleaning Attachment: amzn.to/2kwBMBK
Pencil Torch: amzn.to/2U3OTaa
Fitting brush 4 in 1: amzn.to/45ELin6
Propane gas(Blue bottle): amzn.to/3tpWAOo
Lead-free tinning flux: amzn.to/2U3abEW
Flux brushes: amzn.to/2T8ROBc
Lead-free solder (Sterling): amzn.to/3ZT6Jzn
Flame protector: amzn.to/3tzkcQV
Abrasive pads: amzn.to/2XaY6kT
Pencil reamer: amzn.to/2tBuhKW
All-in-one deburring tool: amzn.to/3B9dLUv
DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn't done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!

Опубликовано:

3 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 131

@RunOs3 6 месяцев назад

No talking, no squealing, no backstory, just showing how to do the job. I can’t think of a more perfect video. Thank you so much for making it.

@Got2Learn 6 месяцев назад

🤩🤩🤩

@edwardnino9896 Год назад

Your commentary provides useful information, it is missed!!

@ericsfishingadventures4433 Год назад

I used to do medical gas pipeline work and the fact this kind of information exist is actually amazing, well presented.

@Got2Learn Год назад

Sweet, thanks 😊

@d46512 Год назад

What is that? Like the oxygen inside hospitals?

@justCarner Год назад

I solder with my valves closed as well. People argue ventilation for leaving it open but that’s not a good reason. The best reason for closing it is to help keep the shape of the gasket where the ball valve closes. Great work, as always.

@Got2Learn Год назад

Good tip!

@theyhateme8763 Год назад

@@Got2Learn valve should be slightly cracked open. if you over heat the gasket blows out

@Inquisitor6321 5 месяцев назад

Ideally, solder ball valves in closed position. OR open when you need to vent the hot air from inside the pipe so it doesn't bubble out through your molten (fresh) solder joint. But DO NOT solder ball valves while they are partially open. That will ruin the valve. The only valves you can solder in the partially open position are: stop & waste valves; globe valves or gate valves. Happy sweating!

@w116tjb 28 дней назад

It really depends on what the manufacturer recommends. Documentation on the valves will indicate which they prefer.

@z1522 10 месяцев назад

At 3:04, a gap appears at the top of the joint, suggesting poor flux or contamination, instead of the shiny continuous bead one desires. There might be enough solder inside to seal the joint, but I would worry that it could fail without the obvious continuous bead.

@lg3187 7 месяцев назад

its a large gap, need to go back and fill it in after it cools a little

@paulbauer5337 3 месяца назад

Valve should be open during soldering as to not trap expanding air with a fixture or hosebib open.

@ClippyC 11 месяцев назад

The lesson I learned here - take your time.

@Got2Learn 11 месяцев назад

Yes.

@shawnbush41 Год назад

Great video! Glad to see you uploading still!

@JimsEquipmentShed Год назад

Nice, it was interesting to actually see the time involved.

@juanceballos8423 Год назад

Thks, for the video that solves the debate on the other video!!

@jifors Год назад

How do you solder when you have a T fitting close to the valve. As in no pipe seen between one of the the T end and the Valve? Going to install a 3 valve bypass for my water softener. 1" pipe and valve.

@Viper6-MotoVlogger Год назад

Well done mon ami. You are the master of masters 😁👍🍻

@Milkman1969 Год назад

Great videos dude! I have learned a lot.

@Got2Learn Год назад

Glad to hear it!

@brianhoffman5414 Год назад

Thanks man these can be helpful!

@electrolatif Год назад

What is the solder can ise for air-conditioning?

@michaeljohn29 Год назад

Well done 👍🏻👍🏻

@kele1264 Год назад

Thank you very much!!!

@JasperTedVidalTale Год назад

Nice lead free video

@CitizenShane 11 месяцев назад

Hey man i started using tinning flux, nokorode, and I'm used to using everflux and you have to thoroughly stir everflux before using. The tinning flux is so much thicker and pastier, do you need to stir it thoroughly as well?

@Got2Learn 11 месяцев назад

I leave it in the heat when I can.

@andrewc6385 7 месяцев назад

Been a while since u posted. Hope your doin well 🇨🇦

@Got2Learn 7 месяцев назад

Father had a severe stroke in August, so my priority is not to make videos anymore unfortunately :( Thanks for your concern Andrew!

@heinzotto1194 5 месяцев назад

Great video, exactly what I needed 👍

@Got2Learn 3 месяца назад

Thank you, don't forget to share, it really helps the channel!

@MrGabriel1973 4 месяца назад

this video is so interesting, especially for deaf people who really want to learn this job thanks

@Got2Learn 4 месяца назад

You're very welcome!

@Got2Learn 3 месяца назад

Thank you, don't forget to share, it really helps the channel!

@dingo5842 7 месяцев назад

Thank you!

@Got2Learn 7 месяцев назад

You are most welcome!

@nefariousyawn Год назад

Whenever I see the logo for Oaty I can't help but think about oatmeal.

@lmzaadi Год назад

So relaxing

@Got2Learn Год назад

😴

@sigor2011 Год назад

What's with the silent treatment?

@user-mi9ls5fw3f 3 месяца назад

Very helpful thanks

@Got2Learn 3 месяца назад

Thank you, please share if you can, have a great day sir!

@learninglessons7428 7 месяцев назад

Can you do a video on "vertically" soldering larger size ball valve and pipes i.e. 2"? I understand its much more involved... Thanks!

@Got2Learn 7 месяцев назад

Already have, here's the link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LU9oHBhMfG0.html&ab_channel=Got2Learn

@mayerlito 3 месяца назад

Thank you a lot for your video, Excellent!

@Got2Learn 3 месяца назад

Thank you, don't forget to like and share 😇

@mattmorrison5479 Год назад

I would love to know your opinion on the knew style shark bites. Sucks cause I work at a plumbing store and people don’t like the knew ones.

@Got2Learn Год назад

Sharkbite Max?

@Lugenfabrik Год назад

He did a video on the new shark bites.

@mattmorrison5479 Год назад

@@Lugenfabrik ima look for it thank you

@AGhostInTheMachine Год назад

I thought that much pre-heat on the pipe and valve would've burned away the flux, but that doesn't seem to be the case. Is it because the Oatey in the green container is more heat resistant or something?

@Got2Learn Год назад

Correct!

@AGhostInTheMachine Год назад

@@Got2Learn I see, so would it be okay to just always use that type of flux for any joint instead of the other types? I'm always in a rush fearing flux burn, but you're way more patient. For an amateur like me, that would be a nice advantage being able to go at a more relaxed pace as shown.

@Got2Learn Год назад

@@AGhostInTheMachine for sure

@keepingup2952 Год назад

Dang, what's that little blade tool you use for scraping the inside of the copper pipe called? Anybody know? Oh, I see it above, it's called a pencil reamer. Thanks!

@d46512 Год назад

Pipe deburr tool

@electrolatif Год назад

Oatey 95/5 solder, is it good for refrigerant piping?

@Got2Learn Год назад

Negative. You'll be needing silfos rods to braze those lines.

@handydoc2531 Год назад

I am amazed at the neatness and precision. 1 question. I always thought that I was supposed to leave the valve open so as to not damage the seal. Am I mistaken? 😮😮

@Got2Learn Год назад

Thank you, it depends on the manufacturer, some manufacturers require the valve to stay open some require them to remain closed.

@felixsss9683 Год назад

Nepleteš

@felixsss9683 Год назад

Kolik si v USA,nevím v kterém státu,vyděláš jako Instalatér za měsíc?Dik za odpověď.Hi Dalibor

@FNPMSN 3 месяца назад

why did u use oxy/actelyne torch on that 2inch? mapp gas or regular act. (b-tank) would b just fine.....

@Got2Learn 3 месяца назад

I had the oxy/aceth setup, but yeah a btank would work just fine.

@victorhugorengifomera6517 10 месяцев назад

This solder could use in hvac pipe

@Pete.Ty1 Год назад

👍👍👍. Thank you

@Got2Learn Год назад

🙏🙏🙏

@paulmanhart4481 3 месяца назад

You closed the valve? I heard it should be open. How do you know? Also, you heated the pipe instead of the fitting. Why? Thanks, Paul

@Got2Learn 3 месяца назад

That particular brand and model ask for the valve to be in the closed position when soldering, some ask to be half opened, some opened, it really depends the brand. As for why I heated the pipe, I explain that here: ru-vid.comUgkxm1YH54kJ0Fwcwe0Udkrlg6NjX3Fh6TBQ?si=M5Wq_QQ4AETtOKIf

@suavemang Год назад

Can you solder 2 inch with propane?

@Got2Learn Год назад

Doable, not preferable.

@cm20506 8 месяцев назад

How much pressure can soldering points withstand?

@Got2Learn 8 месяцев назад

Don't go above 130lbs, anything over that needs to be brazed or threaded.

@cm20506 8 месяцев назад

@@Got2Learn I meant the fluid pressure inside the joints.

@tristanquintus3200 5 месяцев назад

Hi and thank you for your many videos. They have been very helpful. I’m just beginning to learn some soldering skills and have a question for you. Regarding the soldering of the brass valve in this video. Will the heat from the torch potentially damage or compromise what appears to be a plastic seal within the valve?

@Got2Learn 5 месяцев назад

Thanks, check this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cELzc9ZophQ.html

@tristanquintus3200 5 месяцев назад

Thanks for replying to my post. I watched your video using the link you provided. Very helpful, as usual. Fine work.

@Got2Learn 5 месяцев назад

@@tristanquintus3200 You are most welcome!

@davidh.8513 2 месяца назад

Good video as always! What keeps all that heat from ruining that Nylon seal around the ball valve? That is what I worry about!

@Got2Learn 2 месяца назад

The amount of heat used to solder it ;)

@davidh.8513 2 месяца назад

@@Got2Learn OoooKay?

@georgevalente4223 Год назад

What? Cat got your tongue?

@mystuffseventyone5930 Год назад

Really though

@Lugenfabrik Год назад

He’s shy.

@NonrevS 3 месяца назад

We don't wanna hear someone talking bollocks

@phildivirgilio6286 Год назад

good job "how is your back"👍

@Got2Learn Год назад

terrible.

@Michaeltubix 11 месяцев назад

How can I get into plumbing in Canada with zero experience or knowledge

@Got2Learn 11 месяцев назад

You need your plumbing certificate, no choice.

@ntgcanit1149 10 месяцев назад

Apply with Neptune meter installation, learn plumbing ")

@dkaloupis75 Год назад

I have weld so far in my lifetime from 1" to 2" with map gas and for 1"under normal blow torch the small one 😂

@lightcapmath2777 Год назад

What does the LF mean??

@plumbbuild6517 Год назад

Lead free

@lightcapmath2777 Год назад

@@plumbbuild6517 Thank you......knowledge is power... DVD:)

@alext8828 Год назад

What was the purpose of this video? It totally escaped me. Great channel. Bewildering video.

@Got2Learn Год назад

No particular goal for once, just some soldering footage 😉

@alext8828 Год назад

@@Got2Learn Got it. Thanks.

@timowe1691 Год назад

is youre discord still active ?

@Got2Learn Год назад

Nah, got rid of it because no one knew how to use it, i'll be opening a Twitter account soon so people will be able to reach me much more easily, stay tuned.

@nalalla6470 7 месяцев назад

Saw ur brother shouting you out in a tiktok comment

@Got2Learn 7 месяцев назад

Was it good or bad?

@nalalla6470 7 месяцев назад

@@Got2Learn it was good😂, it was a vid about how plumbers could be more successfull than doctors and then she mentioned you👍🏻 (it was ur sister btw, not ur brother, my mistake)

@Got2Learn 7 месяцев назад

@@nalalla6470 WOWWW, awesome!!!!!!!