3 WAYS to REMOVE TINT 

I've tried all three of your methods with the same results you had. When I had to remove the tint from my car what worked best was to park the car in the sun, then spray the tint liberally with an ammonia based glass cleaner. Once it is good and wet get some thin plastic, I used a garbage bag, and put that up against the wet tint. Lightly squeeze it on like you would to apply tint but make sure not to leave the cleaner. Wait about an hour then I went back and the tint peeled right off without leaving any glue residue. I guess there is a reason why it is always stressed not to used ammonia based glass cleaners to clean your tinted windows.

Thank you for keeping it real - other videos show tint removal that looks like it has just been applied (or within about a month - the film is brittle or the adhesive hasn't really "set" but it looks like these windows have had some time to "cure". I've seen a lot of the "trash bag method" - I think that works well (from what I've seen) but almost looks like you have to be a decent installer to get the best results...

Very well done. Thanks.

Very helpful, Thank you.

Thank u😊

I have a clear front window tint on my front windshield, they added a 6" sun strip at top of windshield, it is right at my eye level and annoying while driving. Is it possible to remove just the strip from the clear tint. Tinted less the 6 months ago, really would like to remove the shaded band. any advise is welcome

Thanks

great tip on steamer, thank you.

I do have a steamer , seems that works the best , I am removing the tint on my 2013 Challenger, I am assuming the rear window is more difficult with the defrost on it , but again I have a steamer,thanks for the video guys

I do really need to remove the black-out tint hat was applied to the 3rd-seat side windows of the big pickup m Dad bought. I will probably try some of these this weekend. I must admit that I misread your title as being about "Removing TNT." I live in a still-rural, but being built up area with enough old buildings that I would not be surprised for that situation to come up.

what do you recommend for the front windshield I really need it off I bought car that way and it's hard to see at night to drive since it's in the front windshield

Can I use the steamer method on the rear window with the defrost?

Gracias 👍🏼

Park the car under the hot sun on a stinky humid day also works

Good video. Time stamps would have made it perfect.

Apparently scraping IS required even when using the steam method.

Trashbag and sun method is better

Why not show the trash bag trick

Lol I live in Florida so it doesn’t take very long 😂

I suppose wearing gloves would help from burning your hand

I have a much better way to remove it. The basic idea is using Super Strong chemical to penetrate the tint. You need some old school paint remover, or you can mix 6 part of methylene chloride with 4 part of methanol. You need protection gear of these chemicals. You put a lot of them on the old tint. Wait for 10 min. The tint will come right off without any effort. Then, use acetone to remove the glue. Repeat the process above.. Reminder: any product contains Methylene Chloride will do the job. It can get the job done really fast. However, this is a highly toxic chemical. You have to wear protection gear to do the job.