3 Ways to Safely Clean INSIDE Headlight Lenses

Подписаться 108 тыс.

Просмотров 268 тыс.

50% 1

How do you clean INSIDE the headlight lens without scratching the fragile inner liner (Anti Fog layer)? Here are 3 Ways to approach the problem of cleaning lenses on a set of Custom Headlights.
Spoiler Alert: Ideally by never touching it with anything, ESPECIALLY A SPONGE AND A MAGNET (oof)!
We're talking about expensive custom lights, not the 25 year old family wagon with years of buildup inside.
Here's the plug in Compressed Air alternative I recommend:
amzn.to/3f5VdHL
And the fancy Adam's Polishes Microfiber like Pavel uses:
amzn.to/30Y3cl9
Here's my Amazon Shop List for all of the Cleaning Products
www.amazon.com/shop/flyryde?l...
Join the Community as a Channel Member!
/ @flyryde
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
What's up, I'm Chris! Stoked to have you on this video, and here's a bunch of things you can do next if you'd like to know more!
►If you're JUST GETTING STARTED... check out these videos:
Opening Headlights
• How To Customize your ...
Angel Eyes
• How to Install Angel E...
Demon Eyes
• How To Install Demon E...
Sequential LEDs
• How To Build Custom Se...
►DON'T Do these 5 Things:
• 5 Things You Should NO...
►How to help me GO FULL TIME!
• 2019 - I'm going ALL I...
►Want to work with me?
I can't take on much, but watch this video and read though my contract (which you're free to use for your customers too, btw):
flyryde.com/pages/contract
★FlyRyde Merch
teespring.com/stores/flyryde
★Discounts from Brands for FlyRyde Fam!
flyryde.com/pages/discounts
● Amazon Links
- Amazon Prime 30-day free trial: amzn.to/2JhTYHR
Materials & Supplies:
-RetroRubber Headlight Sealant: amzn.to/2xs0SVm
-Chrome Stripping Degreaser: amzn.to/30f4mXN
-Heat Shrink Tubing: amzn.to/2Xn2bnR
-30 Pin Ribbon Cable: amzn.to/2LyoW10
-30 Pin Header: amzn.to/2xqnMfH
-Q Bond Headlight Repair: amzn.to/2Xg0Fil
-Weld-On Acrylic Glue: amzn.to/2Lzp8Nq
-Potting Epoxy: amzn.to/301bMNS
Tools:
-BEST Right Angle Impact Driver: amzn.to/2ROrvwT
-M12 Drill set: amzn.to/2ZZIVK2
-Heat Gun: amzn.to/2NtMAhL
-Soldering Iron (on the go): amzn.to/2Lwm4li
-Soldering Station: amzn.to/2LwxJR9
-Wire Strippers: amzn.to/2LyosIe
-Dremel: amzn.to/2Lwgi33
-Dremel Flex Shaft: amzn.to/2LtTmkS
-Dremel Plastic Cutting Blade: amzn.to/2XnOAbe
Parts:
-4 Channel Remote Control: amzn.to/2XhOrpx
www.amazon.com/shop/flyryde/r...
(I will receive an affiliate commission for orders made directly after visiting my Amazon Influencer Page)
ⓢⓤⓑⓢⓒⓡⓘⓑⓔ
ru-vid.com?...
Call us: (909) 684-5044
Website: www.FlyRyde.com
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
FOLLOW US ON SOCIAL MEDIA
IG: / flyryde
FB: / flyryde
Twitter: / flyryde

Авто/Мото

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 168

@MrSkepticism 2 года назад

It's like lenses don't even want to be clean

@anthonymoore1464 4 года назад

I'm so glad I just watched this. I had no idea about the inside of the lens.

@prestigelighting9981 4 года назад

Eyeglass cleaning cloth. Has worked really well for me.

@user-gk2cg2th9h 3 года назад

What would you suggest if the film is damaged? I'm in the process of getting a car and I think the headlight has this problem

@yerrys1313 4 года назад

Thank i will try this i open a set of lights for an acura tl and there was some cardboard on the oven (i didn't saw it)and some kind of smoke is now attached to tge inside lenses.

@user-dr4ye3vk1y Год назад

I miss the good old glass lenses, great video!

@DriveWithAndy 10 месяцев назад

My custom headlights had issues and went back and forth and due to them being opened and closed about 3 times they now work but they are misting up like crazy and got all sorts of dirty marks inside. I don't want to be sending them back again. So want to try heat them up, open them up with the slide technique you have shown, clean them and re seal. Shall I still do the washing up liquid and water move around with no running and then dampen a micro fibre and gently wipe? Then I was going to blow dry them and I have kitchen towel to wipe clean. Would this be ok? Then wonder if I need more of that butyl stuff adding or just heat up what there and add more sealant around them the next day. Advise would be great. Thanks

@B9G1D6N 3 года назад

Hey, i need your help. I have a 13 lexus gs350 headlight that had some weird what looked like glue that was leaking down from top on the inside the the lense, water wouldn't do anything so i had to clean with a microfiber towel on a flexible rod, i scratched the inside of the lense. Any thing i can do to polish the inside to restore it back to clear? Maybe clearcoat the inside lense? Or do you know where i can buy a lense? Please help im not sure what my options are right now.

@stephenumphress5705 Год назад

Have you ever seen LEDs cause hazing on the inside film? I recently took my stock ones apart to paint the housing black and put new lenses on. I also changed the bulbs to SMDs and I noticed both the sidemarkers sections got hazing around the bulb, so I had to take it apart and clean whatever it was off and re-seal. I switched to a super low heat led and that seemed to fix the issue. BUT there’s no way that any LED burns hotter than stock. I’m just at a loss as to what would cause this other than heat. Maybe the lenses are just crappy?

@BrandonDmv 2 года назад

Hey I just did a build and hours after finishing the plastics inside the housing all look like they have a white glaze on them. Even though I cleaned the surfaces with soap and water before sealing the housing. How can I remove this without cracking open the housing again which I really don't want to do

@jonathanhildreth3382 3 года назад

I have the same tree streaks on the inside of my unopened after market head lights. I thought it was from air coming through the assembly. A leak in the housing unit. Yes or no? Also I'm looking for a set of headlights for a 2011 avalanche 2 projector in each housing. Bi- xenon lights. Etched lenses. Smoke halos, and black painted front shield (can't remember technical term). And rgb demon eyes. And entire housing painted satin black ( including drl reflectors and side marker).. the projectors... best that can fit in housing minus laser.

@KYoussef76 2 года назад

I have a question about this static dust on the inside of the headlight? what is the cause? I have similar situation with my VW Passat headlight. Thanks

@SJSOmar 4 года назад

How much do you charge for angle eyes on a Saab 9-3 2008 something different but never really seen someone do a pair of these

@helpcambridgeolphysics9729 2 года назад

How do u open head light

@triple_threat_lightz 3 года назад

So these Adams Microfiber towels are better to be use in this application than these Chemical Guys MIC_507_06 microfiber towels??

@rudychavez1123 7 месяцев назад

Hello, is there an alternative to OE for my 2017 Kia Forte? I replaced the original bulbs with LED bulbs on the low beam, and really no difference. I do a lot of night driving. Any recommendations?

@pinoyyue28 Год назад

Is it ok to sand the inside with real fine grit? Or will damage it ? On a civic type r headlihht

@Eric2300jeep 2 года назад

Good tips man! And for the people talking about rubbing alcohol, don't do it! Even diluted, rubbing alcohol is a very strong SOLVENT. Even at 50% and lower. I used 50% alcohol when wiping down a high quality shroud and it actually caused the chrome to flake off after a day!

@Eddrange 4 года назад

I put some HIDs on my projector headlights , why can I see a bunch of lines on the beam on the road? Direction of the bulb maybe?

@evo_dann 2 года назад

Thank you for your informative videos! Anyway you could possibly work with Depo to start making lenses for cars that they don’t make headlights for? For example Evo 7-9s. I feel there’s a market there for them.

@alfredocamacho3067 4 года назад

can you make a vid of how to connect the lights to the cars harness or make them work on the cars power idk if the vid is already done thank you :)

@hahasteven2266 7 месяцев назад

I’m resurrecting this video. I have a failed seal somewhere on mine. I’m curious if I need to wait for the headlight to dry before going to a process like this because I want to hopefully take apart paint and reseal using same lenses. Will baking them while wet from inside bake in all that water and such.

@unspokendesign 4 года назад

This is a fantastic video! Really appreciate all these little helpful 'how-to's that you spend the time doing!

@flyryde 4 года назад

Happy you enjoy them 🙏 this one admittedly took me way too long to make.

@margotfraser8393 Год назад

the video won’t play 2:10 PST

@XxIcybluexX 2 года назад

Are you using warm water or slightly hot water to get the dirt loosened up?

@MikeeVee Год назад

My 2013 Nissan Altima has the projectors inside, the lenses on them are cloudy and need cleaning. I was hoping this would help me, it doesn't seen like it will.

@graysong2961 2 года назад

Does this Plastic film that exist on the interior of the light exist on older cars like a 91 integra?

@mixification 3 года назад

Recently did my 350Z lights and got a small blemish on the inside of the lens that needed contact to get off, so used a new microfiber and some panel prep for paint and yeah hazed the lens. Since the light is long gone anyway (previous owner butchered the housing by breaking all but 1 clip so doesn't seal unless I cover the outside in silicone) I thought id try the wet sand, clear coat, polish method and for the most part it worked really well. You can still see some scratches at certain angles but like I said the housing and lens are done anyway and this is just temporary until I replace it with a depo housing and lens and transfer the OEM internals over.

@kianward5999 3 года назад

smashing vid bro i enjoyed every bit of it great worm my man

@Sinerwray 3 года назад

You deserve more subs :)

@jfray3725 Год назад

I got a headlight that doesn’t come apart. Only a quarter size hole to get into ? Any ideas?

@johnnicholson2549 5 месяцев назад

I have f150 lens that is discolored inside it is a custom light. Can you clean it for me if I send it to you ?

@oldtimefarmboy617 3 года назад

One time I had moisture in my light so I pulled it off, poured rubbing alcohol inside, swished it around, poured it out, and blew air into it so all of the alcohol was evaporated. Big mistake. That coating on the inside turned hazy so I had to buy a new one.

@flyryde 3 года назад

Sucks man. That’s exactly what sounds like it should work, but no 👎

@lowhertzhighspl 3 года назад

I'm sure glad I read your entire comment bcuz while reading I began moving towards my rubbing alcohol thinking I FINALLY found a fix to cleaning the inside of my headlight projector glass without being able to touch it since I refuse to pull apart my headlight assemble from fear of not being able to properly seal them (2011 Ford Edge) I'm about to try using 6" extra large q-tips with a microfiber eye lenses cleaning towel. I had a difficult time installing new LED bulbs last year, I couldn't get them to twist back in due to too much metal on metal friction so I stupidly sprayed WD-40 inside, over spraying inside of the projector lens!!!! What's worse is, I repeated the process on the second headlight!! Good luck to me for removing the year old WD-40 without dismantling the assemblies. Tips/Suggestions will be appreciated, if they are worthwhile.

@joshuacharlesgrey8935 3 года назад

@@lowhertzhighspl I'm wondering if @flyryde might know if mineral spirits would work?

@waris3732 2 года назад

Perhaps try white vinegar

@JAW11 Год назад

White vinegar works amazingly well on the outside but I don’t know about the inside as I had no idea there was a delicate plastic lens on the inside until I watched this video. I have a Honda Fit and recently learned the inside of the headlights cloud over, so no amount of cleaning the exterior is going to fix them. Just for the heck of it though, I mixed white vinegar, baking soda and water and used a sponge on the exterior lights and voila, the lenses are nearly clear. What’s left is on the inside but it’s 90% better than it was! It saved me $1200 at the mechanic. I wish I’d taken before and after photos but I didn’t think of it. I honestly didn’t know it was going to work as well as it did. ❤

@AlexPerez-hg5yu Год назад

At 6:57 you speak of using compressed water. Where can I find it? Drop a link

@user-yu9ve9kt4x 3 года назад

If we missed up the lenses where can we get them from or that's it we need new headlights!?

@jackbauer8699 2 года назад

I’m missing a dust cover. And now the inside film is peeling. I can’t find a dust cover online for 2014 Dodge Dart GT HELP!!!!

@dougyoud5944 Год назад

Thanks! I got some butyl inside my rx7 lenses, tried some soapy water and a towel… but think I’ve screwed it up. Will try the lens sealer, and if that fails move on to buy new ones…

@richardsilva5134 2 года назад

Awesome video thank you it's good to see your very meticulous with your work. Something to consider is I think you were using a paper towel on the outside of the lens when you were doing a cleanup keep in mind that paper towels and by nature will scratch soft surfaces. Quick question if I do separate my lenses from the housing what sealant should I use to glue back together?

@jcmottern 3 месяца назад

Elmers glue. You're welcome 😁

@JD-wm4uv 2 года назад

Any tips on cleaning the inside of a stock projector lens without removing the clear cover . I've removed the light bulb having difficult time cleaning don't have tool long each to reach inside of projector lens its kinda cloudy and dusty cause it's a 2011 🤔 any suggestions on what to clean with that won't leave residew I just want them crystal clear no haze

@user-ik8fl2xr5t Год назад

Did you find a solution? I'm having the same problem

@renasmile 6 дней назад

I don't have an air compressor, can I us a blow dryer to dry of the headlight?

@slashslash984 3 года назад

Is there a way to clean after you've sealed up the lenses? Short of taking everything apart

@richardsilva5134 2 года назад

Following this because I would like to have the same answer I was thinking vinegar cut with distilled water but I'm not sure

@waris3732 2 года назад

Nope

@Picks_Productions Год назад

Method 4: Have a fender bender that isn’t your fault, get them replaced by insurance for free lol

@garforce2 4 года назад

I use the same sealer but can’t remember where I found it lol, i’ll have to look at local Oreilly

@flyryde 4 года назад

I’ve been buying this stuff ever year for the last 6-7 years. It lasts a looong time.

@Tommyturbo1981 Год назад

How do I get the lens off of my 2007 Mazda 3 so I can clean the inside

@orvelldeonarain9708 3 года назад

Do you think a mix of rubbing alcohol and distilled water would work? I have condensation deposits and was thinking of trying on my beater first 😂, but maybe you could try it on a set of lenses you already have laying around?

@flyryde 3 года назад

It will do a great job at destroying the film on your lens 👎

@carldchiafullo1394 Год назад

@@flyryde...

@user-je2kj1mr6s 5 месяцев назад

Do you have a video showing how to get the glass off?

@TheKhwailed 3 года назад

10:10 ... what's the name of the soundtrack??? I love 80's style of music!

@IrishUSMCVet 6 месяцев назад

Couple of things! you can fix the crazing with a super expensive 3m canopy kit for aircraft. and the microfiber cloths can only be used once for the headlights, after that here considered soiled and will contribute to lens scratching. Learning alot from your channel. wish you were still doing videos.

@NajarOffroad 4 года назад

As you’re washing the lens look super close in the reflection for the like to give this video!

@flyryde 4 года назад

Did you smash the like button

@gunsnjesus6107 3 года назад

Nice shirt got the same one !

@tonyjaquez3595 Год назад

Man glad i found this video! I was about to open mine up and polish the inside.😂 can I send you sone pictures of these lights and you let me know if they're even worth saving?

@SuperSany18 Год назад

Recently I was doing some modifications on headlights and washed inside lens with sponge and some dishwashing soap and ofc made mistake and than fixed or I hope I fixed mistake by sanding inside lens with 2.5k grit carefully with very light pressure and after washing again with water and drying with paper towels than I used burdock oil to do some polishing inside again with paper towels and it looks amazingly good, not sure if it's gonna last. Also outside lens was sanded all the way from 150 to 2.5k grits and polished with burdock oil and I never had cleaner and better lenses since I have car. Again I'm not sure if that was right thing to do and will it last, it was just desperate experiment and results are amazing currently. Headlights are from Audi A6 1998y.

@EscapePlanSkateboarding Год назад

Update?

@BIG45ROB 4 года назад

Was wondering if this was coming after watching the wrx video :p clearly those lens were distorted prior to you guys doing the lights that's dope 👌👌

@flyryde 4 года назад

No the marks were 100% my fault. They happened because I didn’t properly wrap the lenses up and kept them open to the dust in the air for so long.

@BIG45ROB 4 года назад

@@flyryde I hear you, and honestly I've debated this issue for a long time, I love old lights but clearly if the lens is to far gone not much you can do, have you ever tried possibly, like a ceramic pro coating? I've never opened headlights yet just wondering if that might get rid of the micro scratches?

@flyryde 4 года назад

Yeah some dudes shoot clear and all sorts of stuff. I don’t know, I’m just not interested in burning time. If “fixing them” will cost me 5-10 hours of my time, that’s A LOT more expensive than temporarily tying up 2-300 bucks on a brand new set of lenses. I’ll get that money back plus some, where the dude that blows a ton of time and effort isn’t getting anything back besides some potential crying from his customer that paid for perfect and got, at best, nearly perfect 😉

@PrelandRanger Год назад

Does a dust air can work if I take the back caps off and spray in there ? I don’t want to take the headlights apart?

@user-ik8fl2xr5t Год назад

I want to do the same.. Did it work for you?

@PrelandRanger Год назад

@@user-ik8fl2xr5t yes it works

@villicanajorge 3 года назад

Where do you purchase those headlight gills you installed on the wrx lights

@flyryde 3 года назад

@sinister.retrowerkz on Instagram 👍

@joshuacharlesgrey8935 3 года назад

I love your videos... I saw that you have it coming out of the oven with hardware and wiring still in it, is that usually OK?

@flyryde 3 года назад

Its ok 👌

@joshuacharlesgrey8935 3 года назад

@@flyryde if I'm going to be doing the degreaser dip I should remove EVERYTHING though, right?

@EdwinRodriguez-et3sr 3 года назад

Where can i get the gills from the wrx headlights?

@flyryde 3 года назад

@sinister.retrowerkz on Instagram 👍

@turbosmike2046 2 года назад

Have you seen the videos of a magnet wrapped in a cloth and placed thru the headlight bulb hole with string and then pulled across the inside surface by a magnet wrapped in cloth on the outside of the lens? Thoughts on that?

@flyryde 2 года назад

Lol yeah. It was cute 🥰

@turbosmike2046 2 года назад

@@flyryde recommend trying it on somewhat cheap lights?

@abcars2856 2 года назад

Are you in the uk

@EricVirtueable 2 года назад

"just vertical paths", this is what youtube was made for man, freaking sick.

@oldtimefarmboy617 3 года назад

Have you ever thought about wrapping stuff like that in plastic cling wrap before putting it on a shelf for storage.

@flyryde 3 года назад

Yup, I actually reference that in this very video, and show that little trick on the video I suggest: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-z8GiqwoUOUU.html

@lowhertzhighspl 3 года назад

How to remove WD-40 from inside of projector lens WITHOUT dismantling headlight assembly? Even possible? 6" extra large q-tips with microfiber towel? Any glass cleaner I can use? I was hoping this video was FINALLY a fix to cleaning the inside of my headlight projector glass without being able to touch it since I refuse to pull apart my headlight assemble from fear of not being able to properly seal them (2011 Ford Edge) I'm about to try using 6" extra large q-tips with a microfiber eye lenses cleaning towel. WHY? I had a difficult time installing new LED bulbs last year, I couldn't get them to twist back in due to too much metal on metal friction and a terrible angle so only my fingertips can reach the bulb, tight space, so I stupidly sprayed WD-40 inside, over spraying inside of the projector lens!!!! What's worse is, I had to repeat the process on the second headlight!! Good luck to me for removing the year old WD-40 without dismantling the assemblies. Tips/Suggestions will be appreciated, if they are worthwhile.

@fernandogodina505 3 года назад

We're you located

@IIucki 3 года назад

Cuanto cobra usted por instalar luces de colores

@jimmybagg9439 3 года назад

How can I get an exact length for a Cadillac ATS headlight??

@flyryde 3 года назад

Hmm?

@jimmybagg9439 3 года назад

FlyRyde led strip *

@MostlyPeacefulCombatVet 4 года назад

On another note, I really wish I could find some nice new lights for 08-10 ford superduty. Both of my custom builds (on my 08 and on my 2010) have aged so bad I'll never get them perfect again. New Motorcraft lights are priced atrocious. Never seen depo make them. Which sucks. I love the depo lights. My titan and Xterra lights were both depot. Super awesome for the cost! Sooooo if anyone knows who makes a set with good quality aftermarket set of lights for the whopping 2 years they made this body style truck(oem style. Without the extra garbage projectors and weird LED placement)...... Holler at this guy! Or if you know someone who has a stockpile of like new condition take offs without charging my 2nd born. I'll take em. Maybe you wanna help a brother out. I would love to upgrade to a dual projector setup too. I think I can squeeze a morimoto 5.0 or g5r in the factory turn/running location. Thanks for the content Chris! Always a pleasure watching you show yourself being human. 👍 Y'all take care

@flyryde 4 года назад

I’ll keep an eye out for you dude 👍

@MostlyPeacefulCombatVet 4 года назад

You should definitely do that and reach out to Adam's! Kustom 54 knows his business! That man always impresses me. Has tips and tricks for days. I still think Pavel knows some sort of lighting and paint voodooism/magic 😂 A couple of these high end builders do. You still know electronic wizardry that I can't seem to master. Despite the master classes. 🤔 Lights looking way better my man! Nice job 🤘

@flyryde 4 года назад

He came over for beers one time and we just couldn’t stop talking in the workshop. Pretty sure the wives are happier with us apart, lmao.

@Rebecca_The_Dragon 2 года назад

Had my oem lights replaced by the dealership for flaking exterior coating, new ones looked great until i took it for a wash… water on the inside, left spots. Sadly this warranty claim was fulfilled on the last week of the cars warranty and now its either spend 700 on a new driverside light or go aftermarket…

@louvendran7273 4 года назад

The best way to smooth out glass cheaply is to work the surface with pumice soap and to rinse off as you did. It has micro abrasives that will work out any blemishes. Then to apply a gentle glass polish with a dust free cloth. If you use a 1400gsm cloth or higher to wipe off it will leave minimal streaks. I have cleaned the outside of lenses but not experimented on the inside with the exception of just wiping them with a clean/new cloth with a little rubbing alcohol. Also, the smudges left after air drying can be removed with rubbing alcohol and a soft dust free cloth. The alcohol evaporates super fast without leaving residue. Hope my suggestions can help you. Thanks for an awesome video as always.

@flyryde 4 года назад

It’s so crazy. I make videos like this that are deceptively complex. On the surface it’s some idiot acting like water and soap is hard to figure out. In reality, your seemingly rational idea of alcohol and cloth would most certainly destroy the inner layer I spoke about, but in tiny little sections, eating though only where you rubbed, but not where you couldn’t access. It’s one of the worst things you could do. Also keep in mind it’s been 20 years since headlamps had glass lenses, so the pumice idea is out the window. Sucks right? Two totally good ideas are absolutely terrible in reality. Stick to the tips in the video and you’ll be stoked at the results 👍

@louvendran7273 4 года назад

@@flyryde Sweet tnx.

@lamboman9 3 года назад

@@flyryde mostly true, but my '06 Volvo has glass lenses. Do you know if they have the same anti-fog layer that I need to be careful of?

@AW-tm8kh 2 года назад

How mate, do restore headlights for clients. If so can you reach out to me for a quote. .cheera

@user-dk5tn6rr6d 3 года назад

At 28 years old i was asked what i wanted for xmas didnt want any one to spend money so i sent them all the affilate links on here 🤣

@flyryde 3 года назад

Hahaha dude that’s awesome 👏

@user-dk5tn6rr6d 3 года назад

@@flyryde figured if they get me something might as well help zomeone eles too 😁

@brianhouts 4 года назад

Why!! My lenses hazed after my last build, and yesterday I cracked them open and clean them. They cleaned up but the irony that this video pops up in my feed after I cleaned them.

@flyryde 4 года назад

What method did you use to clean them up? How did they turn out?

@brianhouts 4 года назад

FlyRyde I used dish soap and a microfiber to clean them up then compressed air dried them. I didn’t think to use distilled water that’s clever. The haze is from something off gassing either paint or adhesive. It’s the only thing that makes sense. They cleaned up fairly well, no more cataracts even with a new microfiber i got fine lines. These are my personal test lights so I’m still trial and error. New lenses would be the next step. Great videos I learn so many tricks. Keep it up.

@EmmAyeVee Год назад

You contaminated the microfiber cloth with your barehands. As well as using the tap water and distilled water. Also when using the compressed air to blow out the water, hold the lense upside down so gravity can do its job. It will prevent any floating particles from landing inside too.

@baryka7procent767 Год назад

ounce i live caps open in sprayroom and same problem

@djboom3024 4 года назад

Hmmmmm maybe this is why my GTR headlights are bright and shiny 😎

@flyryde 4 года назад

Haha, there’s nothing better than perfect 👌

@keith38able 4 года назад

why not skip the tap water and just use all distilled?

@flyryde 4 года назад

I’d be curious to actually measure the amount of water I used in the sink. While for you, I sped through the long dull parts of washing them out, the reality is, I’d have used up 10 gallons of store bought Distilled water, only to achieve the same results.

@packerman1203 3 года назад

Ok so what do i do if i dont want to rip it off of the housing

@user-ik8fl2xr5t Год назад

I'm curious to know if you found a solution

@packerman1203 Год назад

@@user-ik8fl2xr5t i bought new headlight assemblys

@transamin85 4 года назад

I wonder if cleaning then using a ceramic coating on the inside would fill in any tiny scratches

@waris3732 2 года назад

Only one way to find out

@aworthington4966 Год назад

So how can u clean the inside lens w/o taking the whole car apart to do it

@voodoossj Год назад

Good thing I procrastinate, because I was going to polish the inside of the only pair of headlights I have xD

@lowcivicman99 3 года назад

Never had that happen to me

@dannydee9919 8 месяцев назад

For the second method, placing the lens om a fixture would give a better chance of not accidentally damaging the inside

@FenderRealm 4 года назад

I had to polish the inside of mine as they were hazed on the inside

@flyryde 4 года назад

Some guys use Easy Off oven cleaner to completely melt out that anti fog layer that gets hazy.

@K-Riz314 3 года назад

Did it turn out good in the long run?

@notahmad1593 Год назад

yh how is it working for you

@thewiseone8191 3 года назад

PLEASE HELP ME MAN. I HAVE CONDENSATION BUILD UP INSIDE OF THE LIGHT. I DON'T HAVE HAVE THAT SPRAY YOU USED OR COMPRESSED AIR. WHAT CAN I DO???? PLEASE RESPOND THANK YOU

@flyryde 3 года назад

... but, why are we yelling?

@GrabinGears 3 года назад

Use some alcohol bro.....I know the feeling.

@GrabinGears 3 года назад

@@flyryde why couldn't you just answer him? Instead of some snarky reply..

@flyryde 3 года назад

Just A Trucker first off, I made him a free long ass video telling him exactly what to do, how to do it, and why. You my man, came in with something I specifically said would ruin his lens (without even knowing it was terrible advice), and then criticize me. Cute bro.

@GrabinGears 3 года назад

@@flyryde Free? Your channel is monetized lol. His view is paying you stop it. Where do you people get alcohol will ruin the lens. I used 70% rubbing alcohol and it came out looking great 🤫

@stephenm5000 6 месяцев назад

Cleaning the lens surface is not the issue, getting at it when the only 'hole' is when you take the bulb out, that's the problem LOL Was looking for some nice custom made tool like an over extended old fashioned flexible 'pipe cleaner', but no one has seemed to have invented one yet!

@randolphcirilo4800 4 года назад

Depot or any other aftermarket lights are inferior to OEM.. Id do what I could to restore the OEM lights..

@flyryde 4 года назад

I wouldn’t say inferior. One car that’s plagued massively by bad, yellowed old lenses is the IS250/350. Screw buying new lights at 2k+ when a set of DEPO light lenses can be swapped into the factory Xenon units and make them look brand new. Just depends on how much you care about that extra 1600+ dollars whether you want OEM or not 🤔

@randolphcirilo4800 4 года назад

@@flyryde .. Is there anything that can be done to prevent that yellowing fogging crap?

@flyryde 4 года назад

Randolph Cirilo probably, but overall I’m not the car care guy to ask. I treat my cars like crap lol. I’m sure some dude out there waxes his lights daily, sings sweet lullaby’s when he locks her up tight in the garage for the night, and then dreams of detailing the undercarriage... 🤦‍♂️ For normal humans, I think it just boils down to the environment where you live, and if it’s garage kept it not.

@EricVirtueable 2 года назад

There's nothing cooler than doing the things we aren't supposed to do but want to do and pulling it off.