300 PRC Custom Build: MDT ACC Chassis Assembly, TriggerTech Diamond Install

Подписаться 358 тыс.

Просмотров 48 тыс.

50% 1

Full Story: bit.ly/2kO82R5
UR T-Shirts: bit.ly/2UEAkgW
UR on Patreon: / ultimatereloader
With the barreled action complete, it's time to install the TriggerTech Diamond trigger, assemble the MDT ACC Chassis, and then bring the barreled action and chassis together!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Hornady
- Benchmark Barrels
- TriggerTech
- MDT
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...

Опубликовано:

17 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@ryanbroyles7487 5 лет назад

You should have some dummy rounds for checking to make sure the gun is functioning, especially in the shop. Had a buddy doing the same thing and blew a hole in the wall. Luckily he had embankment next to his shop that stopped the bullet and no one got hurt.

@rufusleers 5 лет назад

I'll take shit that never happened for 400.

@rapidrrobert4333 5 лет назад

I apologize for my comment the other day. I guess that I'm envious of all the new high quality machine shop equipment that you have. Mine was acquired over 40 years of tough use, so the wear history shows it. Keep up your scientific education of rifle shooting. Rifle is science, handgun is skill, and shotgun is art .........

@Ultimatereloader 5 лет назад

Thanks RapidRobert, glad you want to watch these videos!

@TdotOfiddler 4 года назад

You made me so nervous when you racked that first round without checking to see if there were any problems with the new trigger etc... Had a Buddy install a new triggertech and when he closed the bolt it would fire. Good thing he wasn't using live ammo.

@brockgarrison3617 5 лет назад

Love getting the notifications when new videos are up. Take that thing to 2000 yards already!

@scottjacobs7341 5 лет назад

Looks like a tank Gavin, can't wait to see you shoot it !!!

@sms9106 11 месяцев назад

Built a MDT with Terminus Zeus Action and Prefit Proof Barrel - incredibly easy install, way easier than an AR.

@alexgavieres8293 5 лет назад

Maybe someone should just make a steel PRS chassis? Cheaper....all that tactical weight already built in. Lol!!

@Ultimatereloader 5 лет назад

Great idea! :)

@Xtorin_Housecat_Ohern 5 лет назад

and you could blue it, make it fudd tactical, lol

@charlesmckinley29 5 лет назад

Xtorin O'hern chrome plated

@alexgavieres8293 5 лет назад

MDT already has that Oryx chassis that is a long single piece forend to buttstock...they could maybe just do that exact design, nitride it, then sell it for $199? Or if that's too much weight, go with their LSS or LSS XL?

@MrBackpussy 5 лет назад

Material is cheaper but would take several times longer to machine, time on the CNC mill is far more expensive than the aluminium or carbon steel.

@lukeclement1310 5 лет назад

Optic idea Night force 5-25 or 7-35 milXT or Razor Gen 2 EBR-7C. That rig deserves some top glass imo... no budget stuff

@williamjohnson2896 5 лет назад

Guess I am just too old the language of shooters has changed and is a bit hard to get used to. My interpretation of custom is taking an action, installing a barrel ( turned to custom specs and length from straight blank), custom chamber with tight neck based on desired neck thickness along with throat to match desired bullet loaded to desired length. Numerous modification on the action and above all a stock made to fit from a solid blank of wood hopefully at least 2.3/8" thick along with hand checkering in a good point pattern, checkered steel but plate etc. If you want to see what I am talking about to the gunvault on Chanplin's site or Ed Lapour custom. I like Gary Goudy of the guys still in the business. sorry for the rant I realize I am out of date, what is important is go forth and have fun making your firearms and calibers suit you!!!!!!!!!!!!!! Keep the videos coming.

@Ultimatereloader 5 лет назад

William- sounds like a very cool formula. By the way- I'll be doing a lot of different rifle builds in the future, and you have given me some ideas. Thanks for sharing!

@charlesmckinley29 5 лет назад

William Johnson those rifles are works of art but have you seen the distance they are reaching out to now???? The bullet, optics, and machining technology has made possible distance only dreamed of before. Yes, I still long for a Rigby rifle.

@johncrawford5871 2 месяца назад

Try the tract Toric 4.5 x 30.I put it on my 300 win mag build love it

@tommyj7087 5 лет назад

All that weight is crazy!1 Can't wait to see how it shoots.

@Ultimatereloader 5 лет назад

24.7 pounds! (with bipod and optic) Crazy-good.

@rebelreloading5265 5 лет назад

Can’t wait to see more 🙌

@irelandsailor 2 года назад

The MDT chassis needs the 3.85"CIP Magazines for the .300 PRC.

@brianchambers1891 5 лет назад

300 rum, 300 Weatherby mag, 300 win magnum, 30/ 378 weatherby mag, 300 savage, 300 H&H mag, have a shoot off! Let the guns speak!

@stanlucas1932 5 лет назад

Gavin, have you considered one of the new NF NX8 scopes? I would like to see you do a review on them. Thanks for the videos.

@Ultimatereloader 5 лет назад

Haven't but thanks for the suggestion!

@jaybigboy34 5 лет назад

I love that chassis but I'm disappointed that it comes in two pieces. I was hoping the buttstock would have been one piece with the chassis for better rigidity.

@williamheinbuch 5 лет назад

jaybigboy34 was thinking the same thing. I’ve met some of the guys from MDT, and the vibe i get from them is they do this so their chassis can accept AR style accessories i.e. buttstocks and grips. This thing however... all of the peices are MDT, so charge extra or less, whatever I don’t know if machining as one piece would be less or more expensive, but make it all one piece, and make two version, one that is all one piece and proprietary and one that you can use AR parts on.

@CokeMk7 4 года назад

the whole point is for the design to be modular and changed out by someone to make it exactly how they want, hence the name modular driven technology. I understand your point but if you want a one piece design why not just get a MPA?

@TexasTrained 2 года назад

Best deal out there.

@carsonf7750 4 года назад

Your videos are great, thanks for putting out great info.

@michaelbirkoski987 3 года назад

I know this is an older video. I would like to see you use an Erik Cortina tuner brake with this rifle and see some load development in correlation with the tuner brake.

@charlie5234 5 лет назад

These build videos are great.

@Ultimatereloader 5 лет назад

THANKS! I wish you could see this rifle in person....

@bradleytyrrell4417 5 лет назад

Nice mate keep em coming

@jake_kwekwek1474 Год назад

great vid man, as always. what barrel action did you use on this one? im planning on swapping my savage 110 precision with howa m1500 HS precision, do you think it will be compatible for aics mgazines like the savage?

@davidfarber7542 3 года назад

Gevin, why so much weight in the foregrip?

@laruejon 3 года назад

David Jones. Does Impact Precision 737r action come with the bolt assembly?

@josecoyote6079 5 лет назад

You rifle look awesome excellent job👏👏👏👏👏. Can you tell me more about this new caliber?. - The max reach before transoceanic - The advantaged or disadvantaged in comparison with 338 LM Thank you for sharing your videos

@davidorpwood8433 5 лет назад

how dose it compare to the .300 RUM .CASE CAPACITY .

@kyle875 5 лет назад

Always enjoy your videos, what cleaning product do you use to clean the bore for break in, clenzoil, ballistol etc?

@wulfdal1421 5 лет назад

Those Bondhus T-Handle hex key wrenches may not be the best, but I ain't seen or used none no better!

@Ultimatereloader 5 лет назад

Yes, I have the full SAE set and the full Metric set- use them all the time, great quality!

@johnbarton1878 5 лет назад

MDT makes great chassis , did mine on a Savage 300WM. Love their butt stocks.😀

@Loki-im9qi 5 лет назад

I got the ACC chassis on my 6mm Creedmoor for Aus PRS it’s amazing

@charlesmckinley29 5 лет назад

My wallet hurt just reading the title.😂😂😂

@Whiskey.alpha_ 5 лет назад

So good can’t wait to see the glass ya top that off with what brand are ya thinking

@Ultimatereloader 5 лет назад

Looking at options... :)

@G56AG 5 лет назад

Please tell me you were using dummy cartridges when you cycled the action at about 7:25, you didn't say they were dummies, and I noticed the primers in place when you ejected the cartridges. When I make up dummy cases I leave the primer pockets completely empty, not even a fired primer in place to ensure safety. It would be extremely careless to cycle live rounds through the action in the shop, a powerful round like that is capable of penetrating an entire house, and possibly the house next door.

@Prometheuss.cannabis.corner 4 года назад

Is it possible to put the external m lock weights on without pulling the barrel action out?

@AustriaRedDragon 3 года назад

Without Epoxy bedding I would not do this. I have already installed some MDTs but without Epoxy bedding the systems don't sit properly.

@xitianllc 5 лет назад

Is the full barrel free floating in that chassis? I was wondering about any kind of bedding is needed. Sounds like the action is screwed to the chassis and the barrel floats right? Great build!

@lukeclement1310 5 лет назад

yes its all free float... MPA is the same. You dont have to bed a chassis... torque action screws and run it

@m85green 3 года назад

how did you determine how much weight to add

@paulharper7808 5 лет назад

Why so many weights?

@Ultimatereloader 5 лет назад

Paul Harper to tame the recoil!!!! This one will be super heavy, my other 300 PRC will be more light weight will be interesting to compare the two!

@joelsandoz741 5 лет назад

Mark 5, mark 5, please a mark 5... lol.

@TexasTrained 5 лет назад

Awesome

@polanco760 2 года назад

What size magazine did you use

@dennisbush9612 5 лет назад

I would love to know the possible weights of this set up, min and max.

@Ultimatereloader 5 лет назад

With scope and bipod it weighs in at 24.7lb - more info coming!

@alexlewisjr.9023 5 лет назад

What 300prc reamer did you use? I need a reamer to rent quickly for a hunt in October! Thanks, Alex

@Ultimatereloader 5 лет назад

Dave Manson! See: ultimatereloader.com/2019/09/13/300-prc-custom-build-chambering-and-machining-the-barrel/

@charlesmckinley29 5 лет назад

What is the weight of the chassis system with all the weights you added to it? Thank you!

@Ultimatereloader 5 лет назад

The rifle weights 24.7 lb with optic and bipod, BOOM!!!! :)

@Kbaker45862 5 лет назад

Get a 15-60 vortex gold eagle.

@Ultimatereloader 5 лет назад

Interesting- I'll give them a look!

@johnbarton1878 5 лет назад

@@Ultimatereloader I used a Vortex 5x25x50 gen2 on my 300wm.

@ВячеславМуравьёв-р1ъ 4 года назад

👍

@darren996 5 лет назад

Show how you tune the magazine please!

@JacksonMalcolm 5 лет назад

What ever you do... dont go IOR.. PMii are a great price and so are the atacrs. So many good choices out there!

@joeyheyne3255 5 лет назад

I'm curious what personal experiences you've had with IOR that would make you not recommend them. I've seen lots of positive reviews. Another good option for glass is Vortex's Razor HD Gen 1. It has Japanese glass, 120 MOA of internal elevation, true zero stop mechanism, Vortex's version of a christmas tree style reticle, one of the best (if not the best) warranty in the industry, and at $1700 at most sporting goods stores, is HEAPS cheaper than the S&Bs or Nightforce.

@JacksonMalcolm 5 лет назад

If you spend much time researching you'll find out pretty fast that IOR can be shady. But yes there are some great Japanese options and honestly I think you'd be surprised at the prices of PMiis right now. For a while they were $2100-2200 for a P4f which isn't half bad. Also there's a %50 sale on the ZP5 if you buy a mauser (M18 I think) but that brings the price down to razor levels. So many great options right now.

@joeyheyne3255 5 лет назад

@@JacksonMalcolm Was curious if you had any PERSONAL experiences with Valdada. I've seen good and bad reviews for a number of their scopes, some people say quality was their issue and some say they weren't happy with the customer service, but there are also a lot of people who just say, "I read somewhere that they weren't good." No worries though, I'll stick with my Vortex products and hope that Gavin finds luck with the optic he chose!

@JacksonMalcolm 5 лет назад

@@joeyheyne3255 I get that, and I dont know that I should be ashamed to have not been "tricked" into an IOR. I just hope gavin doesn't get bit. Form everything I've read its 50/50 for IORs, why not just choose something with complete confidence? Like vortex...

@reloaderroom3151 3 года назад

That was so unsafe chambering live rounds indoors very surprised think you should know better

@6mmBRA 4 года назад

Kales scopes

@antibiotik5618 5 лет назад

Красивое оружие...

@Ultimatereloader 5 лет назад

Спасибо! Я люблю это.

@wazza_fishing 4 года назад

Bipod info ??

@jameskliewer5809 5 лет назад

In the future, please do not chamber live rounds anywhere but at the rifle range, pointed downrange.

@scottkindley 5 лет назад

I suppose you don't chamber a round on carry guns do you?

@jameskliewer5809 5 лет назад

@@scottkindley That information is not public. However, a pistol round is not at all the same thing as a rifle round, and the trigger design is likewise different. I said "please". That is, if it pleases you not to do it, it will likewise please me that you do not do it.

@scottkindley 5 лет назад

1-Treat every firearm as if it were loaded. 2-Always keep the muzzle pointed in a safe direction. 3-Be sure of your target and aware of what is beyond it. 4-Keep your finger outside of the trigger guard until you are ready to shoot. Those are the generally accepted rules of gun safety. Nothing about "chambering " a round. Nothing distinguishes different rules for "pistol" vs "rifle". It specifically states "every" firearm. Chambering a round isn't unsafe. No amount of "I know better than you" trolling changes that. Additionally it's obvious this man is making a firearm, which included machining his own barrel. It's also obvious that testing the function of the firearm is paramount to the safe and proper operation of the rifle. It's also painfully obvious this man isn't acting in a reckless and/or negligent manner in demonstrating and testing the function. Obviously it "pleases" him to test his rifle and doesn't require or need your approval to do so. So if you are displeased with seeing a firearm "chambered" you might want to consider watching videos about basket weaving to reassure your sensitivities and calm your unreasonable fears. I say that because I didn't watch him ask for anyone's opinion or permission as to how, when, or where he makes his rifle. Saying "please" doesn't grant one any special considerations so get over yourself.

@paul.g.h 5 лет назад

@@scottkindley Chambering the first live rounds and closing the bolt on a "just built" rifle is a critical part of the build and test process. Just making sure the rifle's pointing somewhere unquestionably safe while you do it is proper dyed-in-the-wool gun safety common sense. Simples.

@scottkindley 5 лет назад

Paul Hudson and what exactly makes one think his muzzle wasn't pointed in a safe direction? Again ... the generally accepted 4 rules of safe firearm handling has not been demonstrated to have been broken.