I am unboxing and installing the Triggertech Diamond rem700 trigger to the Bergara B14 HMR. If you like this video please like and subscribe so I can bring you more content.
Hope you all have a Happy New Year! Thank you for watching, subscribing and leaving comments below. I truly hope you enjoyed it and I look forward to producing much better content for you all!
I went with the Triggertech Remington Special flat version in my HMR and I'm very happy with it. Like you said though the factory trigger is not too bad and if you are just hunting it's probably all you will need.
Thank you for watching and commenting. You are 100% right on that. Honestly if I were to just use it for hunting. I would have had no issues with it. It really wasn't even bad while grouping. What got me shooting paper was how my finger felt after shooting a ton of rounds. I typically ride my finger along the guard to keep the position the same and that sharp curve just dug in after a while.
I have the 'Special" version of that trigger for Remington 700 clones on my B14 HMR, and it is great. I am too much of a traditionalist to own a flat trigger.
It is amazing. I am really used to it now with the 9oz or so pull I have it at now. I used to not really think much of the flat triggers but got one for my AR15 and love it. I don't hate curved, just found that I prefer the flat. In my head it feels like I get a more consistent pull. Paper not much different. The B14 HMR shoots great either way.
Thank you, I appreciate it. Trying to get better at making the videos. I instantly get tongue tied while trying to film. It was my daughters phone on the charger. So annoying. I will 100% make a video with a pull guage and shooting. I just don't have one right now.
You mentioned that you have the HMR PRO. Thought they came with a triggertech special. You must really love the diamond eh! Awaiting the 2 stage diamond for my bergara with a new 6mm creedmoor SS 26” German walther barrel.
Na, it's just the regular B-14 HMR. I think I was honestly just kinda nervous on the camera at that point in time. I do love the diamond though. Hope the video helps and I appreciate you watching and commenting. I'll bet that thing will be one hell of a tac driver with what you have going on it!
@@caseysammobench yeah 65 pills down range so far. Making bug holes already. Found some NOS Berger’s that are Molly coated. It’s really liking that. I’m sure the groups will close up nicely when I drop in the TT 2stage. Merry Christmas and Stay Safe. BTW. Meant to say check your bolt shroud to be sure it’s the newest type. There is a video out showing how to check. Mine failed about 600 rounds in. Think is covered if you contact Bergara. L8er.
I'd say there's not really a significant difference in accuracy. I think Bergara has a pretty nice trigger to begin with. I just got it on a really good deal, and I like the flat face trigger more for comfort.
Idk man. It is just rubber pads that it's resting in. Maybe it sounds worse with the hammer, but there is no direct impact either. I've 100% had it in worse situations hunting. I do appreciate the comment and will attempt to take better care of it in the future.
I was thinking the same thing. 2 nuts and you remove the scope rather than twisting ît because you're rapping a mallet against the pins. It's for precision and it's glass, that was definitely a faux pas. Learn from constructive criticism it's meant to help .
Congratulations on the new trigger! I'm not actually 100% sure if it matters as long as the pins are set. However, I'd have to recommend to put them in at the same orientation they were when you pulled them out. BTW I'm looking at posting another longer distance video on Saturday. Got caught up in the rat race of life and haven't made it out in a while.
@@caseysammobench Thanks for the advise!😊👍🏻 I went with a flat Timney Calvin elite 2 stage trigger. I hope it works fine😉 Cool, looking forward to see you shooting langer ranges. I finally got my permit, to take my guns to other countrys. So I'll try to go to Poland in February to shoot a 1000yrds with the HMR😍
@lukas That is bad ass. I wish you could post some pics or videos of shooting it in different countries. I'll bet there is some pretty amazing ranges out there on your side of the pond.
@@caseysammobench I'll try to think remind it, when I am there. Yes we have some cool ranges here. In Denmark is a 2 mile range, where I want to go some day, but not with a 308😉 But every of these ranges is like 500 miles away, so I have to go there for a weekend or so.
@lukas that would be cool as hell. Also I here the Calvin elite is one beautiful trigger. You should be able to get different trigger attachments too. I'm really getting used to the flat one and love it though. I should be doing a video out to 600yds and some seating depth testing on the rounds I made. I found the hardest part of re loading for the bergara is the mag length really limits what I can do compared to the chamber depth.
Good morning Lucas. I haven't got to go out and test it yet with the amount of rain that ive had where I'm at. I'm thinking next Saturday it should pass by and I'll post up another video of it firing and a the same time do a seating depth load test.
@@caseysammobench I'm not familiar with reloading, but I want to start with it next year... So I'm looking forward to your next video😊 I only have shoot my HMR twice, but it shoots sub halb MOA at 100 meters, so I am pretty happy😉
@@lukas-ik7qe heck ya, it was a big step to start re loading. I've been at it for about 4 years now and I'm still learning so much. It looks like some prices are going down. If I were to start over again. I'd immediately start with the rock chucker Supreme Press single stage and by the scales and everything else separate. I now have an RCBS charge master and it's amazing. But depending on your budget if you have to just try out a frankfurt or Lyman digital scale. Digital will make your life much easier
@@caseysammobench Thanks for all the info Casey! I've already watched some reloading videos to get an idea of what it takes to start, but as I live in germany and our gun laws are super crazy, I will have to take a reloading course first anyway to get a permit to purchase powder🙄 over here beeing a gun guy is pretty fucked up, as the longest shooting ranges are 300 meters, so I had to apply for a permit to take my guns to denmark an poland to shoot longer distances too... Anway even the 100 meters are fun with the HMR😉
It's the MIM mfg Swivel Rail Adapter. I got it on Amazon cost is about 45 dollars. Seems to be built pretty tough. It's not plastic which is really nice. I'd say the only complaint I have is how unnecessarily far the rail sits from the stock. Or I guess how thick it Is. For that being the one complaint, I'm being pretty knit picky. Doesn't seem to have any negative effects while shooting and it's sits on the stock with a very solid placement .
Hi, I read that the minimum pull should not be set under 2.8 lbs on a Bergara because of the heavy firing pin. I did also read, that the bolt release can be removed from the trigger since it is pretty useless in these rifles. Now, I am new to all of this and I'm not sure exactly what that means but I am researching tons of info and asking questions to learn more. I will also talk about this with my local gunsmith so he can show me what it all means. I will primary use this rifle to hunt.I just want to be sure that this won't be an issue and that it won't make the rifle unsafe. If I am to drop the rifle on a hunt I can't have it go off on its own. I hope I don't sound like an idiot writing this.
I'm not sure about the heavy firing pin thing and that having to do much with the trigger pull weight. But I'm definitely not a gunsmith either. I would say 2.8 to 3.5 lbs is a pretty safe weight for hunting and if I am going to be walking around the woods with it I would 100% raise the pull weight on mine to that. Right now I'm just shooting steel and paper with it though. I have a lever gun a bit more suited for where I am in GA. I'm not really seeing any deer at more than 50yds. I hope this answer helps.
@@caseysammobench Thanks for the info! That was my thought exactly that if I am to going to use it for hunting, that I don't drop it below like 2.5-3.5. I have read a lot of comments on blogs about people using the triggertech at 10oz give or take without a problem, but they don't seem to be using it to hunt. I already purchased the diamond version. I think I am going to have to return it and buy the trigger tech special which can be adjusted from 1.5-3.5 lbs.
The slot in the action of my Bergara B14 HMR is .010" under the spec'd dimension of .305", plus or minus .002". I'm going to have to shell out $80 to $120 to get the slot opened up. Another Bergara quality control gaff.
