3018 CNC router the first real cuts with a (very surprising result)

Подписаться 301 тыс.

Просмотров 16 тыс.

50% 1

Video 457 Roger Webb takes the first real cuts with the new 3018 CNC router, with a very surprising result + using free CAD/CAM.
Everything @ Banggood DE 2.5% discount
(ONLY AT THIS ADDRESS BELOW)
aklam.io/9Dh0ux
Help support my channel and become a Patron
www.patreon.co...
Carveco 2D/3D Design and Manufacturing Software
CARVECO 5% discount code is- ROGERWEBB5798
store-us.carve...
ArtCAM tutorials
/ @delcamartcam
Pen ordering Email: rogerwebb521@gmail.com
My hand made pens are for sale
Up to 2000-year-old wood pens
Huon pine USD$60
Blackwood striped USD$55
Myrtle USD$49
Blackwood USD$49
Oak USD$49
***+ shipping ***
This channel;
A beginner’s handbook to Wood-turning Wood Lathes, CNC's, Laser's, CAD/CAM, Carpentry and 3D printing
Sponsored By Autodesk, Fusion 360, ArtCAM / Carveco, Vectric Aspire
www.autodesk.com/products/fusion-360
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 18!
Disclaimer:
These videos, commentary and or advice are intended for entertainment and inspiration for adults over 18-year-old. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.

Опубликовано:

7 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@fredmartinez933 4 года назад

Thank you Mr. Webb..you are very good teacher..keep making video so we can learn..

@rogerwebb9600 4 года назад

Thank you, I will

@robertkoltun6995 4 года назад

Can't wait to see how it performs cutting in 3D.

@wolfrobots118 4 года назад

I got the Carveco software subscription because you recommend it....I love it....It works great with the 3018 to make 3d carvings.

@rogerwebb9600 4 года назад

Great to hear!

@skulls2802 4 года назад

Hi Roger, I have had the same machine for around 6 months and i have been very impressed. I cut 5mm Aluminium, 3mm carbon firbe sheet, acrylic upto 10mm. I did buy some tungsten flat bottom bit for the carbon and kept the feed to around 150 with a step down cut to 0.5mm per pass. I have a dust shoe fitted to a workshop vac, thats a massive help to reduce the dust etc. The spindle is ok, i have thought about and will be getting a larger unit and the 4030 is on my list. This is because of the 3018 performance so far, but i do think the set up and way you operate it has a big impact too. I use a laser cutter myself ( Piranha unit that i bought as a burnt out and refurb ). Id be interested in the 3d cut as i am looking at putting a curved bezel on one of my projects, im wanting to make a bezel for a 5'' screen from carbo, aluminum or Extruded acrylic.

@Arevirr1 4 года назад

Really enjoying watching all your videos! Hope your health improves! We want you around a long time!

@LucasHartmann 4 года назад

I have the exact same machine. Very happy playing with it, but mostly because I bought it as a TOY, not as a serious tool. It cuts FR4 PCB nicely, plastics usually melt and fail. I was curious about wood, will definitely keep an eye on your videos, and give it a try as soon as I build a dust enclosure.

@rogerwebb9600 4 года назад

Thanks for sharing

@zootallures7003 4 года назад

Roger, Try taking tool diameters into consideration when you do your layouts in your CAD/CAM software, as your total variance is within half a millimeter of your tool radius. I don't know about the inventables CAD/CAM software, but GRBL doesn't have automatic tool offsets in it.

@mr.Bruutt 3 года назад

Nice video, i just bought this machine and im looking forward to make nice products with it. Thanks a lot, and keep going. Greetings from Holland.

@rogerwebb9600 3 года назад

Thank you

@richardmaidwell3492 4 года назад

Nice video learned a lot from you.Good teacher

@rogerwebb9600 4 года назад

Glad it was helpful!

@SomeGuyInSandy 3 года назад

Been cutting out RC airplane parts on mine. Thanks for the videos, they were a help!

@rogerwebb9600 3 года назад

Great to hear!

@alandimery3379 4 года назад

Great videos, thanks. On your advice I have bought a CNC3018. I am enjoying it so far. The only problem I have is upsetting the neighbours with the noise. Looking forward to maybe a bigger machine, could you tell me please, before you updated the 3018 was it noisier than your bigger machines when cutting?

@FrancGorenc 4 года назад

I cut acrylic on the pro model.

@chiptester 4 года назад

Fusion 360 is free for hobbyist. I have it but vectric is by far a better for cnc work.

@D3rron08 4 года назад

Very informative video as always! Quick question why do you use yellow lighting in your workshop instead of cool white led lighting? The yellow gives the video a yellow hue that throw me off.

@rogerwebb9600 4 года назад

Great point!

@jamestobin2644 4 года назад

Your circle was small because you did not do the second finish cut. You need to eliminate the second bit (finishing pass before you write the code )

@loizostheochari1509 4 года назад

Roger will you do a video on how to calibrated the CNC machine. The three axis X, Y, Z.

@rogerwebb9600 4 года назад

Yes, I plan to video this tomorrow

@billylester7901 4 года назад

Roger, enjoy your 3018 videos, question: 1.reference easel and grbl protocol, are these programs metric and/or imperial? thanks

@rogerwebb9600 4 года назад

They can choose to work in metric or imperial in GRBL and Easel.

@jerrysayers4002 3 года назад

Roger enjoy your videos but have a big problem trying to cut cast acrylic 3 mm machine gets half way through first pass bit gums up stops machine WHAT am i doing WRONG HELP Thank You Guess 86 year old man should not be trying to do such things ?

@rogerwebb9600 3 года назад

Acrylic can do that with a CNC router, it gets hot and sticks to the end of the tool and gums it up, I have used water to cool my tool down as it cuts.

@jamestobin2644 4 года назад

You have got to eliminate the second bit that is for the finish cut if want. Your cuts would be too size if you had run the second tool. You created a second file for your square cut and again did not do the finish cut. I use easel for everything. It cost but saves a lot of frustration.

@rogerwebb9600 4 года назад

Ok thanks James,

@chuxxsss 4 года назад

Roger would linxcnc work with this machine would you know please.

@rogerwebb9600 4 года назад

Yes it will

@chuxxsss 4 года назад

@@rogerwebb9600 Will have a play when I get my cnc here. I did not get the laser. In the fine print on second page ebay sad no laser provided? On front page tell you it comes with it.

@FrancGorenc 4 года назад

Carbide Create is a pretty cool piece of software carbide3d.com/carbidecreate/

@gangleweed 4 года назад

Why is it every time I go onto UTUBE I get the insane desire to buy something I don't need or already have in another form and end up deeply frustrated....that is the ADHD syndrome kicking in. Having just watched this video I'm champing at the bit to see who sells one at the cheapest price and after browsing for the 500 watt upgrade as an improvement..... 'cos you gotta improve all the time and it's better to improve at the beginning than the end..........I thought, why not build a much better one, same size with steel tube all welded, fully supported linear rails with ball screws and running with Mach3, under 500 bucks...........so I switched off and had a cup of tea......I already have a CNC mill so why do I need another one?

@rogerwebb9600 4 года назад

Hi Ian, one step at a time in two weeks or so, I will be fitting a 300 watt spindle that is good for 16,000 RPM, this one is 100 watts and 7,000 RPM. The 500 watt is way to big for this little router. In time I will be making a bigger one about 400mm x 400mm and then an even bigger one of 1000mm x 1000mm.

@gangleweed 4 года назад

@@rogerwebb9600 I agree......maybe a 4th axis build using just a stepper motor and a scroll chuck would compliment the 3018 for some small jobs, but I think the 200 steps per 360 deg would not give you very much resolution hence the cheap ones on EBAY all have the toothed belt reductions at 1:6 etc.