3018 CNC Router engraver XYZ Axis Calibration made simple, CNC on a budget

Подписаться 301 тыс.

Просмотров 15 тыс.

50% 1

Roger Webb makes XYZ Axis Calibration simple for the little budget 3018 CNC Router
Everything @ Banggood DE 2.5% discount
(ONLY AT THIS ADDRESS BELOW)
aklam.io/9Dh0ux
Help support my channel and become a Patron
www.patreon.com/user?u=15079773
Carveco 2D/3D Design and Manufacturing Software
CARVECO 5% discount code is- ROGERWEBB5798
store-us.carveco.com/?ref=B40...
ArtCAM tutorials
/ @delcamartcam
Pen ordering Email: rogerwebb521@gmail.com
My hand made pens are for sale
Up to 2000-year-old wood pens
Huon pine USD$60
Blackwood striped USD$55
Myrtle USD$49
Blackwood USD$49
Oak USD$49
***+ shipping ***
This channel;
A beginner’s handbook to Wood-turning Wood Lathes, CNC's, Laser's, CAD/CAM, Carpentry and 3D printing
Sponsored By Autodesk, Fusion 360, ArtCAM / Carveco, Vectric Aspire
www.autodesk.com/products/fusion-360
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 18!
Disclaimer:
These videos, commentary and or advice are intended for entertainment and inspiration for adults over 18-year-old. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.

Хобби

Опубликовано:

26 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@jc-pj3nh 6 месяцев назад

Terrific explanation for us beginners.. This is the type of teaching we beginners need. It is beyond frustrating to watch videos that skip steps assuming we know anything about cnc operation. Showing each area to mouse click on is great. I am a college graduate in a very tough medical degree and cnc operation is testing my brain to the nth degree. I appreciate your teaching method.

@strojarskastrukastolac416 4 года назад

Thank you Roger!

@3dpchiron709 4 года назад

Thanks for the vid series. Perhaps some paper on the wood, then lowering the tool to leave a mark at the start and finish of the moves would increase accuracy.

@wolfrobots118 4 года назад

Awesome I wanted you to do a video about this very machine and wow....you did....Thank you.

@thefunhouseproject4782 3 года назад

Thanks Rodger huge help to be honest

@allbeit582 4 года назад

The math is really quite easy. Distance actually traveled divided by the distance it should travel gives a ratio ; 107.5 / 100 = 1.075:1 .... Look up the currently set steps (860). Divide steps by the previously calculated ratio ; 860 / 1.075 = 800. Reset steps to 800. Done.

@unasoto1 4 года назад

Or you could say 1 full rotation of the screw is 8 mm and there are 200 steps per rotation and because settings say 800 that mean he's using quarter steps. So 8 mm divided by 800 equals .01 mm per quarter step.🙂🙃🙂🙃🙂

@jarisipilainen3875 3 года назад

yes answer is integer number. if its 798.978 or 801.213 then you need change leadskrew better cheap chinese version that have not pitch error xD

@RajendraVermaa 3 года назад

Thanks. Beautifully explained

@rogerwebb9600 3 года назад

My pleasure

@foxabilo 4 года назад

In my experience the only time you need to adjust steps per mm is when you have changed stepper motor angle type, stepper controllers that have a different micro stepping defualt or lead screw pitch. These machine are simply incapable of the level of sub thou accuracy that would ever need compensation due to say thermal expansion, I saw your previous video where your pocket was incorrectly sized, but that was because you did not set the tool width compensation value. It was not a steps per mm issue.

@mugazombi 3 года назад

Thank you Sir!

@rogerwebb9600 3 года назад

You are welcome!

@PatrikFormanek1 3 года назад

Thank you soooooooo much :-)

@rogerwebb9600 3 года назад

You're welcome!

@petermuller608 3 года назад

Valuable content! I would however suggest to use a on body mic instead of a room mic in the future.

@FlightSim2703 3 года назад

Awesome video, I appreciate for this explanation, I have the same machine, with the same size moving base plate, my engraver bit moves in X axis for entire length but in Y axis only 120 mm, please can I use the same concept to expand the Y axis size ? Because my project size requires 160 mm in Y axis. Which number for Y axis needs to increase? Thanks very much for your help.😊🙏

@rogerwebb9600 3 года назад

Glad it was helpful!

@FlightSim2703 3 года назад

@@rogerwebb9600 Hi dear any answer to my question?

@jc-pj3nh 6 месяцев назад

Yes you can. It is the same method using a different axis number

@chuxxsss 4 года назад

Roger, it should be OK for circuit board design would you think?

@rogerwebb9600 4 года назад

Yes it will be fine.

@mareksettle 3 года назад

Can anyone tell me why my z axis wants to go beyond it's stopping points and start thudding like trying to go further. And, if I set the zero point with the button it doesn't recognize it and buries the bit everytime? Help please.

@hobbyrob313 3 года назад

126/5000 Thank you Roger Maybe you also want to tell us what the rest means? Healthy Greetings from the Netherlands! Rob

@abramklassen3869 3 года назад

I have a problem with program it on my computer I still haven't got it going is there a special computer for that

@rogerwebb9600 3 года назад

All help and information for CNC is available on my Patreon pages www.patreon.com/user?u=15079773

@jerrysayers4002 3 года назад

Hi. Roger Enjoy your videos .I have trouble with my new 3018 Pro. I hit send & the spindle goes all the way to top chatters against the stop then starts to move around like it was cutting. Anybody please HELP thank you

@rogerwebb9600 3 года назад

Hi Jerry, Google, GRBL $ code list www.diymachining.com/downloads/GRBL_Settings_Pocket_Guide_Rev_B.pdf You could put in $3=6 this will change the axis direction

@jerrysayers4002 3 года назад

@@rogerwebb9600 Thank you Roger for the response BUT now all the spindle assembly does is drive the bit down in to the material until it stops the motor.

@florenthuck4539 2 года назад

bonjours pourriez vous me dire comment peut 'on accélère la broche quand elle grave . La mienne avance pas vite du tous

@rogerwebb9600 2 года назад

You can do this in the GRBL control

@florenthuck4539 2 года назад

@@rogerwebb9600 Merci j'i suis arriver enfin .

@maximekone1769 3 года назад

Hi Roger and anyone who can help me, the commands of my CNC 3018 no longer respond. Use of Grbl Control standart software. here is the message that the CNC sends me: [CTRL + X] SERIAL PORTE ERROR1: NO SUCH FILE OR DIRECTORY. What could be the problem and the remedy? please help me! thanks in advance

@rogerwebb9600 3 года назад

Hi, if it was me I would delete GRBL from my computer then reinstall it, and start off fresh.

@jessenorris1672 4 года назад

Hi Roger, are you running windows 10 on your laptop??

@rogerwebb9600 4 года назад

Yes win 10

@jessenorris1672 4 года назад

@@rogerwebb9600 thankyou mate my 3018 has been sitting almost 1.5 years as i could not get the driver to run on Windows 10. But now its up and running again, i would love to know if you think i could make a coin mold from graphite with the 3018. Graphite is very soft i could send you a sample if you like

@rogerwebb9600 4 года назад

Hi Jesse, the 3018 may, my 6040 and 6012 CNC router will and my Sieg X2 mini CNC will in 4140 steal, I have videos of them doing this job on my channel.

@gangleweed 4 года назад

No, No Roger, that's fuzzy logic........I just can''t do it.....with Mach 3 you specify the move and the axis to move.......G00 to rapid to X00 ,Y00 (G54) etc and G01 to feed to X50 Y50 etc, add a bit of Z to go down......that is so logical I write my own G code and I'm an 80 year old noob at best. It's only 2.5D but what the heck, you can write that manually so easy......3D needs a CAM solution. If I indulge in one of these toys.....they're all toys now I'm retired.....I'll have to redo the op system to run with Mach3 and a Gecko drive....whatever...hang the cost.