370Z Gets An ISR Y-Pipe & Single Exit Exhaust System, I've Fallen In Love With The Z All Over Again😈 

Thanks man 🙏, really wasn't expecting it to sound this good. I really love my ISR LTH and Y-pipe on the G but now I can add the ISR single exit exhaust to that list as well 😃.

I have a G and I’m trying to get the same exhaust setup. Do I have to change the Y pipes like he did? And plus do I have to get an extension?

Awesome bro glad I could help, you won't be disappointed. Congrats on the Z purchase, good luck 😀

Happy to hear that this helped you out on your decision, hope you enjoy/love it as I do 😃

Yeah man this thing is super nice. Kind of wish I would have gotten this one for my G instead of the SOHO single exit one.

I also only have 2 hangers on my car i only have the first hanger closest to the y pipe and the last hanger closest to the exhaust exit on the bumper

Did you finally get it lined up? If not make sure you don't have the resonator portion backwards.

@@jiro7720 I was wondering this as well. When I installed mine I only remember 2 hangers being on my 2014 370z. I saw his hanger after the first resonator and was wondering if maybe I just missed it on my car but I don’t think I did.

That's good, the stock y-pipe is really a bad chocking point in the OE exhaust system. Good luck and thanks for watching 😀

Thanks so much brotha, appreciate the support 😃🙏. How does it sound now with the LTH? Still acceptable as a daily? 😁

@@MemosGarageAZ yessir! Ever since the installation I’ve been checking to see if it runs rich but so far it hasn’t luckily. Now I’m never not in sport mode 🤣

@@user-lz3xp7xd5r Hahaha 🤣 nice, I only drive in sport mode 😁

Do you get a horrible rasp on decel from 3k to 2k rpm

I don't at all, sounds like you have an exhaust leak.

Hello, yes you'll need an extension since the 370z length is shorter than the G's and Q's. I believe you'll need a 3" extension, but don't quote me in that.

Hello there. To be completely honest the drone is very minimal and you really have to pay attention to it to hear it. I can have a normal conversation with a passenger with the windows opened or closed, same with music on.

And yes this set-up is with the ISR Y-pipe.

The consensus is the single exit gives more power over the duals, but I'm sure if you look online you may find arguments for the opposite 😁. I've had both and I prefer the single over the dual set-up.

Hello, no I don't, not even a little bit.

None of the ISR exhaust parts hang lower than the OEM stuff, I'm sure this is because of the polyurethane exhaust hangers.

@@MemosGarageAZdid you end up keeping it or did you replace the exhaust?

I currently still have the same ISR setup seen in the vid on the Z. Don't plan on changing it anytime soon 😀.

@@MemosGarageAZ the y pipe out of stock rn but a shop told me they can get the single exit for $500 flat worth it or nah?

@@exisixen $500 flat no tax or shipping? That's pretty good cause Concept Z is selling it for $450, but I doubt that includes shipping. conceptzperformance.com/isr-performance-single-exit-gt-exhaust-nissan-370z-z34-is-gt-370z_p_30805.php

Also i have a sedan, would the 3 piece hangers work or i would need to get the other adjustable set to work?

@@raimelvelazquez7274 Hey man thanks 😃. So I used the gaskets that came with the y-pipe and exhaust system. When I get tuned and add the flame map I'll be going with these thicker ones cause I'm sure the flame map will burn the ones in there now: 2.5" = conceptzperformance.com/czp-xt-extra-thick-2-bolt-25-id-exhaust-gasket-czp-2blt-250-universal_p_63530.php 3": conceptzperformance.com/czp-xt-extra-thick-2-bolt-3-id-exhaust-gasket-czp-2blt-300-universal_p_63425.php. In the G sedan from what I can recall I'm only using the 3 hole polyurethane blue hanger, everything else is stock. Hope that helps man, good luck.

@@MemosGarageAZ Thanks for replying! But isn’t the isr y pipe gaskets a 2.75 inch? So wouldn’t the 2.5 from czp be to small?

@@raimelvelazquez7274 No the front flanges are 2.5 and the single rear one is 3". So it goes 2.5" front flanges > 2.75" piping > 3" piping > 3" single rear flange.

@@MemosGarageAZ Okay sounds good! so basically get 2 2.5 extra thick gaskets from czp then 3 3inch for the rest of the exhaust?

Hello there. I actually just checked and I ordered these from Concept Z Performance: conceptzperformance.com/p2m-exhaust-mount-hanger-bushing-set-3-pack-p2-mhb001-gd-universal_p_23117.php Give them a call, they may have these in stock. Good luck.

Here's the link to the adjustable one: conceptzperformance.com/p2m-adjustable-exhaust-mount-hanger-bushing-long-type-3-hole-p2-mhb003-gd-universal_p_23118.php

Hey man, yes you'll feel a bit more power and torque for sure 😃

@@MemosGarageAZ thanks bro

Thanks man, got mine from Concept Z Performance, I got lucky they had in stock. Give them a call, they might still have some in stock.

Hello there, just for the sake of not missing exactly what you're asking about, I'll lay it out like this: the y-pipe left and right side are 2.5", then it funnels down to a 3", the rest of the exhaust system is 3" and I believe the exhaust tip is 4.5". Hope that helps

That's correct, stock OEM cats.

If you're looking for something quieter/more tame this is the way.

@@MemosGarageAZ Yeah man. Tomei is a little too much. Im from Phx too, love the vids 👍🏽

@@hecticv3624 Yeah it's a beautiful looking exhaust and I'm sure it sounds amazing at WOT but I didn't think it was for me as a daily 😁. See nice VQ's all over Phoenix, been wanting to go to some VQ hangout here one of these days.

Thanks man 😃, sounds better with headphones on LOL

Actually Concept Z is local to me so I picked everything up the next day LOL

@@MemosGarageAZ that would be nice, wonderful build though keep it up👍

Thanks man, appreciate it. So you also doing the ISR Y-pipe and single exit exhaust system?

how’s the exhaust i want something loud but i’m afraid that the isr is just not that loud i might just cut the resonator off and put resonated test pipes or some

It's pretty tamed with the stock cats, I'm sure with high flow test pipes it'll be much much louder though.

The performance is excellent even without a tune, you can really feel how much this set-up has opened up my exhaust system.

Hard to say but historically titanium exhaust system tend to be louder

Yes sir stock cats.

@@MemosGarageAZ clean bro I had test pipes and isr on my z33 loved it , took a break from vq platform and tried the v8 dope ass car but a Z will always have my heart , I sold my corvette and got a 14 nismo , in white breaks my neck everytime I walk out it needs a single tho !! I’m use to a decent sounding exhaust cause the v8s , haha I love your orange interior 🤙🏻⭐️goes insane with the black

@@josepineda9740 Thanks man, there's something about a Z that's makes it so dam good looking and a head turner. The current exhaust setup is okay for now, but should be doing ISR LTH at some point, which will make it louder but I'll have to add a resonator or two to make sound okay. Good luck with the Z Nismo, these cars are so dam sexy with a single exit exhaust 😁

@@josepineda9740was the test pipes and isr single raspy? I have isr single+ y pipe, i need to order res test pipes but i hope its not raspy

@redlinevqhr Hello, not test pipes on this setup, still on stock cats, but I'm pretty sure of it I add test pipes there will be some rasp.

They're OEM seats and so are the door panels, I'm sure if you look around you could find yourself this same interior.

You think this setup sounds stock? Not even close my friend, willing to bet that many others would disagree with you as well, thanks for watching.