Тёмный

375 CheyTac ELR Rifle Build Start to Finish 

Ultimate Reloader
Подписаться 351 тыс.
Просмотров 172 тыс.
50% 1

Full Story: ultimatereloader.com/xcrq
UR on RUMBLE: rumble.com/ultimatereloader
UR on Patreon: / ultimatereloader
My Incredible Hulk .50 BMG rifle set me on the ELR path. I knew right away this was only an entry point and that I’d want a more serious ELR rifle - enter .375 CheyTac. This build is designed for ELR competition, something I’m looking forward to learning under the mentorship of King of 1 Mile and King of 2 Mile Paul Phillips! (His friend and fellow King of 1 Mile, Clay Rhoden, will also be assisting.)
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this RU-vid channel (gavintoobe).
Any reloading data supplied on this RU-vid channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this RU-vid channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this RU-vid channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Bat Machine
- Precision Matthews
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about

Опубликовано:

 

1 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 268   
@oldschooljack3479
@oldschooljack3479 Месяц назад
The most difficult part about shooting 2 miles is finding a place to shoot 2 miles.
@RubiconBear
@RubiconBear Месяц назад
99% of ELR Shooters don't have a practice range to shoot that far, so sign up for any of the ELRSO, Raton thunder or spearpoint matches to get the opportunity while competing with fellow shooters
@fallencrow6718
@fallencrow6718 27 дней назад
@@RubiconBear Or befriend a farmer.
@Duck95ish
@Duck95ish Месяц назад
We challenge you to the Texas Plinking 1 MOA At 1,000 Yards Challenge!
@ModernWelfare9
@ModernWelfare9 Месяц назад
That would be cool
@bokiNYC
@bokiNYC Месяц назад
That would be awesome to see, please do it! 👍
@eamonia
@eamonia Месяц назад
Watch, he goes out there and totally bombs. 😆
@geekswithfeet9137
@geekswithfeet9137 Месяц назад
Should invite Overton…. Let’s see if he can do it outside of an editing suite 😂
@RubiconBear
@RubiconBear Месяц назад
375 really isn't meant to be a 1000 yard gun, it's hard to see potential misses at that short a distance to make corrections
@RonSpomerOutdoors
@RonSpomerOutdoors Месяц назад
Beautifully done and shown, sir.
@Ultimatereloader
@Ultimatereloader Месяц назад
Thanks Ron!!!
@Blue-cq2hl
@Blue-cq2hl Месяц назад
Always find it fascinating not just with the reloading stuff but machining and making these things to accomplish this stuff.
@davidhill1374
@davidhill1374 Месяц назад
Awesome! Your talent & skill set amaze me... Thank you for your content and support of the 2A community.
@Ultimatereloader
@Ultimatereloader Месяц назад
Thank you! Cheers!
@francoisdavel1786
@francoisdavel1786 Месяц назад
Accutac bipod with sled feet + adjustable bag rider is the way to go. All you need now is a piece of plywood with a carpet on for that bipod to ride on. It makes a HUGE difference.
@ICU2B4UDO
@ICU2B4UDO 27 дней назад
That rifle IS Dialed in!! 3 shots with a .375 Cheytac and you make 1 🕳 is freakin' amazing!!
@chrismckoy3533
@chrismckoy3533 Месяц назад
Be great to see some statistically significant groups. Great build! Going down the deep ELR rabbit hole.
@akathecanadian
@akathecanadian Месяц назад
I’m have a family friend that was a sniper for a special forces team way back in early 00’s. Shooting to those ranges is difficult but once you get it, he said it’s a liberating feeling knowing you can hit targets at those ranges. Good luck I’m going to keep trying for 700 😂
@WrenchHead
@WrenchHead Месяц назад
Slow down 😂 ....still working on 1,000YDS, haha.
@Ultimatereloader
@Ultimatereloader Месяц назад
😂
@alexandernachenkin263
@alexandernachenkin263 Месяц назад
👍👍👍1000 - 1400 yards is indeed a doable but difficult distance to hit on the first shot. Good Luck!
@robinepps7274
@robinepps7274 Месяц назад
​@alexandernachenkin263 my friend Chris Schmidt has the cold bore world record of 2874 yards! (Cold bore with 2 follow up shots, within 3 minutes)
@alexandernachenkin263
@alexandernachenkin263 Месяц назад
@@robinepps7274 👍 What rifle, what cartridge? What can I find this World record?
@chrismuncey3861
@chrismuncey3861 Месяц назад
It surprisingly easy I got 1,000yrd a few months back. Before that 300yrd was the most I had shot. Don't over think it I built a very expensive rifle just for 1,000yrd and 1 mile. But I was surprised my 5.56 bolt rifle with a 4-16x50 scope was more than enough for 1,000yrd. And it was 1/5 the $. I intend to try for 1 mile this fall with the more expensive and powerful rifle I built.
@OFFICIALUND
@OFFICIALUND Месяц назад
In the words of William Shakespeare, "3 shots a group does not make."
@joshuathrasher2056
@joshuathrasher2056 Месяц назад
I’ve been trying out a Zeiss LRP S3 4-25 on a 6ARC gas gun. I have it in a 20 moa NF mount. From my zero stop I have 34.7 mils of usable elevation. I don’t know how much magnification people generally use on ELR rifles but I was blown away by the amount of elevation that thing has.
@coreystock5361
@coreystock5361 Месяц назад
Over the top. Absolutely amazing.
@rangetime6779
@rangetime6779 Месяц назад
Amazing build and results, can't wait to see long range.
@bravo9890
@bravo9890 Месяц назад
The first 2 groups I was like uhhhhh?.?. Then after you adjusted the seat depth I was like" there it is, all touching. 👏
@hornady6.5
@hornady6.5 Месяц назад
What a dream rifle, nicely done mate.
@DoonAssassin
@DoonAssassin Месяц назад
Beautiful rifle, and an amazing video, well done, I enjoyed every minute.
@eggbert191
@eggbert191 Месяц назад
Lol meanwhile Mark and Sam After-work are shooting out to 3000 with a 308 Winchester
@HJPreen
@HJPreen Месяц назад
yes but it takes 20-30 shots for a hit.
@MikhaelWest
@MikhaelWest Месяц назад
@@HJPreen "A hit! A fine hit!" - Treebeard
@Unique377
@Unique377 Месяц назад
Nothing but luck no science
@eggbert191
@eggbert191 Месяц назад
@@Unique377 lol show us a video of you doing it. You clearly don't watch or understand the videos
@Unique377
@Unique377 Месяц назад
@@eggbert191 Been reloading and shooting for over 20 years so please tell me what I don’t understand? I simply said it’s nothing but luck and is comparable to standing at the far end of a basketball court and throwing the ball at the rim until you sink a basket. Do you believe military snipers take shots at those distances? Every shot I have seen was under 800 yards.
@lupooutdoors
@lupooutdoors Месяц назад
What a fantastic video! This year we are doing a quest to 1 Mile video series and this was inspirational!
@Ultimatereloader
@Ultimatereloader Месяц назад
Thank you and good luck with the 1 mile shooting :)
@C_oprator89
@C_oprator89 Месяц назад
What an amazing video. Seriously what an experience just watching this
@Big222Dog
@Big222Dog Месяц назад
Great looking rifle. I really appreciated seeing all the process of making it. Do that again in future.
@Ultimatereloader
@Ultimatereloader Месяц назад
Thank you for watching! Yes, lots more of these kinds of builds planned...
@rmp5s
@rmp5s Месяц назад
It's rare that I see something that's actually totally new, but this vid is full of stuff. This is friggin amazing. Subbed!! I wanna learn more!!
@conservativesniperhunter7439
@conservativesniperhunter7439 Месяц назад
Another awesome rifle build by Gavin 😄👍. The 2 mile challenge is going to be fun to watch.
@peripheralterror
@peripheralterror Месяц назад
Absolutely beautiful build!
@rogerculver4511
@rogerculver4511 Месяц назад
Loved this. Keep it coming.
@hotchihuahua1546
@hotchihuahua1546 Месяц назад
Always fascinating and fun to watch y’all build a rifle to shoot accurately ! 👍
@Ultimatereloader
@Ultimatereloader Месяц назад
Thanks for watching!
@4headshooter
@4headshooter Месяц назад
Gday from Oz. Great video, I enjoyed watching your build
@tvvxq_9158
@tvvxq_9158 Месяц назад
Just recently hit 1.2 miles (2100 yds) with my 300 wm. Crazy the equipment you need for 2 miles+
@magi5587
@magi5587 24 дня назад
Nice, what was your set up?
@stevemiller6547
@stevemiller6547 Месяц назад
So awesome! True craftsmanship lives on in the USA!
@greasydot
@greasydot Месяц назад
What an awesome build. Cool paint scheme. I am entertaining the thought of learning how to cerakote.
@jonb7274
@jonb7274 Месяц назад
Fabulous content - you are the master!
@jamessammann9183
@jamessammann9183 Месяц назад
Can't wait gavin
@IMPACTSHOOTING
@IMPACTSHOOTING Месяц назад
Badass build!
@Ultimatereloader
@Ultimatereloader Месяц назад
Thanks Buddy!
@user-TJ365
@user-TJ365 Месяц назад
I use Peterson brass for my 7 PRC. It is very consistent and has held up well to multiple reloads.
@p47rr
@p47rr Месяц назад
The break is amazing. I have a Sabatti Rover Tactical in 300 Winchester Magnum. Barrel is huge in diameter. Unfortunately from the factory it has a non threaded muzzle. Had a local gunsmith thread the barrel. Ordered the same break made for a 308 diameter bullet. Recoil is like a 243 Winchester now.
@mikewilliams6086
@mikewilliams6086 6 дней назад
Nice engineering there! Understanding what you are doing throughout the process to build this accuracy is crazy to a non engineer.
@PewPewVida
@PewPewVida Месяц назад
Unbelievable workmanship 🤟🏽🔥🔥
@hunteranglin3750
@hunteranglin3750 Месяц назад
You could use some swivels for fishing on your spraying rack that way you can turn the part 360 without having to take it off the rack and turn it
@corytimm3136
@corytimm3136 Месяц назад
And im proud of my 400yd ish gopher hits with my 243... wonderful video!
@pulldeauxduck2480
@pulldeauxduck2480 Месяц назад
It’s alive !!👍
@raywhitehead730
@raywhitehead730 Месяц назад
At this point, maybe a drone would be better. What do you think?
@Longrangelefty
@Longrangelefty Месяц назад
Getting that cheek piece on will help tighten up that group too
@d0rrell
@d0rrell 28 дней назад
Problem is there would be no room for the bolt!
@Longrangelefty
@Longrangelefty 27 дней назад
@@d0rrell i run that chassis on my 375ct and it is made so the bolt clears under the cheek piece
@philipejeuceoututkache
@philipejeuceoututkache Месяц назад
375ct is definitively an amazing bullet and for sure the best for ELR. I don't even know if there's and ammo with better ballistic coefficient for that distance.
@jamesclark4
@jamesclark4 Месяц назад
Awesome content my guy keep up the great work 👍 from canada 🇨🇦
@Ultimatereloader
@Ultimatereloader Месяц назад
Thanks! Will do! Appreciate you tuning in from "Up North" :)
@RivinaR
@RivinaR Месяц назад
Would love to see you do a collaboration with MarkandSam afterwork channel on this topic.
@ecleveland1
@ecleveland1 Месяц назад
I would put a check rest on the stock. Your head kept repositioning between shots.
@kevinschneider1820
@kevinschneider1820 Месяц назад
I've done 2800 yards and the prep work for that was an absolute nightmare
@OregonBladez
@OregonBladez Месяц назад
Amazing build, very jealous!
@Ultimatereloader
@Ultimatereloader Месяц назад
Thank you for watching!
@OregonBladez
@OregonBladez Месяц назад
@@Ultimatereloader Thank you for sharing your amazing build. I'm in awe of what appeared to be very little recoil on a rifle capable of a 2 mile shot. The color choice was perfect, I want something similar on my RPR.
@trentsnaza3372
@trentsnaza3372 Месяц назад
Holy crap!!!! I wish I had your bank roll!!!! Hell I'd build all kinds of rifles too! 😂
@qh4007
@qh4007 20 дней назад
FN, incredible project!!! +10
@ruststar
@ruststar Месяц назад
Put a tarp or blanket under the muzzle so you don’t get so much flying debris
@nathandawley3909
@nathandawley3909 Месяц назад
that gun's definitely on my grail gun list
@Moraprecisionreloader
@Moraprecisionreloader Месяц назад
Gavin you ain't holding back on this one.
@jakeMTSU
@jakeMTSU Месяц назад
I have hit a 8x4 target at 2 miles with a 338 lapua, but it was tough lol
@ronmor8237
@ronmor8237 Месяц назад
Crazy how you do all that!! Awesome!!! I was always curious how they do the twist inside the barrels....
@philippedomon5178
@philippedomon5178 Месяц назад
Don't forget the ears protect😂 you know what ? I'm french and every day I would like to be American 😢, great job man
@lynnkramer1211
@lynnkramer1211 Месяц назад
Not fun being an American at the present time. We are humiliated on a daily basis by our President. It is karma from when the French delayed bombing Muammar Kaddafi by Reagan in the 70s. Our degradation is excruciating. Worse than being called a Frog Eating Surrender Monkey.
@ShoresyLK69
@ShoresyLK69 Месяц назад
thinking how far that really is its insane!
@duggydo
@duggydo Месяц назад
Looking good. Definitely need to engineer yourself a good cheek rest though and it will be a laser accurate shooter Gavin.
@lynnkramer1211
@lynnkramer1211 Месяц назад
You guys are catching up to your elders by now. My rock chuck club has been competitions to shoot rock chucks across 3 and 5 mile wide canyons of the Snake River west of Twin Falls, Idaho. The club is 45 years old and going strong. Glad to see you young guys learning to appreciate this sport.
@TheFdgsgf
@TheFdgsgf Месяц назад
I envy your tools and knowledge.
@OneCanisLupus
@OneCanisLupus Месяц назад
😂😅😅😂
@eggbert191
@eggbert191 Месяц назад
You need a cherk riser. Your head is bobbing all over the place
@BigTimberLodge
@BigTimberLodge Месяц назад
I love King of 2-Mile.
@chrismuncey3861
@chrismuncey3861 Месяц назад
I've been looking at that same action and barrel for a 375!!!. I want a Cerus F class stock.
@Mountain_Paladin
@Mountain_Paladin Месяц назад
So you made the Lightning Bolt of Zeus .... That is the tool of the God's. Wow very impressive 🤙
@ibrahim10910
@ibrahim10910 Месяц назад
Very good post.
@bluegunshooter9823
@bluegunshooter9823 Месяц назад
Hey Mister! Where do you currently get Peterson brass in 375 CheyTac?..... Love this project!
@bokiNYC
@bokiNYC Месяц назад
Great video, awesome rifle, it was a pleasure watching. Can you please take on the Texas Plinking 1000 yard challenge with this rifle once you are all dialed in - that would be amazing to watch. 👍
@johnbishop1911
@johnbishop1911 Месяц назад
Have you thought about using Barrett extended range scope rings? You gain 40 moa.
@nathenfarmer5625
@nathenfarmer5625 Месяц назад
Very nice work
@Ultimatereloader
@Ultimatereloader Месяц назад
Thank you, it was a lot of work, very happy with how it turned out!
@chrisshumake83
@chrisshumake83 Месяц назад
Nice work 👍 👍
@HowManyLegsItHas
@HowManyLegsItHas Месяц назад
Do you think you would retain the accuracy going with a stock that was magazine fed, whilst still hand feeding (basically just giving the option to magazine feed if a guy chose)?
@snteevveetns
@snteevveetns Месяц назад
Why not bed the pic rail to the action? Take any possible wobble out there too?
@Triggertarzan
@Triggertarzan Месяц назад
I’m an automotive painter and airbrush artist on cars bikes and anything that can be scuffed can be sprayed. When I met creakier at SEMA in 2018 those guys showed me some baggers they did exhaust fenders tanks heads and stuff on with their air cure formula. Have you tried any of their new pearl chameleon color changing effects pack yet? I’m debating on if I wanna spend the money on something that will model real bad or something I’ll have to cross stitch and coat multiple times to lay and not have a nasty flop light side effect.
@johnfowler4264
@johnfowler4264 Месяц назад
Hello! Have been watching your videos with interest and finally subbed. I’m working on a .375 XC build now and am hoping you can provide some information on the O.D. Profile of your barrel. I’m also starting with a Bartlein (similar headstamp data too) of 1.350 x 35 (blank). This is incredibly nose-heavy. Thanks, John
@mrobinson9297
@mrobinson9297 18 дней назад
thats awesome.
@joelobryan1212
@joelobryan1212 Месяц назад
really would be interested in you giving us the measured MVs with that barrel length.
@hotmetal459
@hotmetal459 Месяц назад
I’d better see you at Spearpoint Ranch with that beast!
@TexasTrained
@TexasTrained Месяц назад
Paul and Clay are both fine guys that Ive shot with.
@christiansmith9414
@christiansmith9414 Месяц назад
Tremendous!!
@me2ontube
@me2ontube Месяц назад
Have you tried any outta the box ready-made 375 chey tac like victrix
@BryanShull-lt8gz
@BryanShull-lt8gz Месяц назад
I would also go with a 40 degree shoulder, no sense letting Ackley have all the fun😂😂😂.
@jimgilligan396
@jimgilligan396 Месяц назад
With a 60 minute rail you can shoot to 3500 yards with a Valdada 4.8x30x56 40mm tube.
@glockparaastra
@glockparaastra Месяц назад
So cool!
@Ultimatereloader
@Ultimatereloader Месяц назад
Thank you!!!
@ishnifusmeadle
@ishnifusmeadle Месяц назад
And here I am trying to scrape enough together for a freakin 1k.....which being honest is pushing it in my area....most areas only offer 500yd safe shots with a few 1ks around
@earlroach7672
@earlroach7672 Месяц назад
Bud, I'm curious what your idea is for rumble and RU-vid? I downloaded rumble just for your show. I'm not seeing the "lack of interference " your talking about
@kellyrick4365
@kellyrick4365 Месяц назад
Damn nice rifle :)
@Ultimatereloader
@Ultimatereloader Месяц назад
Thank you!!!
@gtroxlar8597
@gtroxlar8597 Месяц назад
What brand reloading dies for that 375 Cheytac, where can i get some?
@DJG_Official
@DJG_Official Месяц назад
@UltimateReloader how much did your build cost start to finish not taking into account machine cost ?
@ralphjones7240
@ralphjones7240 28 дней назад
What was your barrel cleaning interval for the first three groups
@ragnarok5056
@ragnarok5056 Месяц назад
What kind of twist did you run, and also muzzle velocity with the 400gr
@michaelvstheworld3680
@michaelvstheworld3680 29 дней назад
When are you going to try a structured barrel?
@mirekslechta7161
@mirekslechta7161 Месяц назад
Just wonder, Why is he always pointing his both hands towards the same point? Is it somewhat better than to use one hand for pointing ?
@6mmsuperlr
@6mmsuperlr Месяц назад
Nice bedding job. What tape did you use for masking?
@Ultimatereloader
@Ultimatereloader Месяц назад
Thank you! It's the thin high-temp tape that's used for Cerakote masking.
@andreytodorov843
@andreytodorov843 Месяц назад
Hi, question. What is the final price without the scope? Just the rifle. Thank you
@otiscarlwhite8745
@otiscarlwhite8745 Месяц назад
Surprised Paul didn't guide you toward a Bix-n-Andy trigger
@kentuckywindage222
@kentuckywindage222 Месяц назад
Hulk SMASHhhh!!!
@toolman9081
@toolman9081 Месяц назад
Wow! How fast is that thing going? Hole on paper before the muzzle blast lol
@1rstTry
@1rstTry Месяц назад
Bro. What did you do in your past life to deserve such an amazing life? I’m over here doin a 9-5 wishing I was dead then I see your content and start thinking maybe there’s hope. Cheers
@Ultimatereloader
@Ultimatereloader Месяц назад
Well, I started the channel in 2007 and literally have not let up on the gas pedal since. It went from a hobby to a serious hobby to a full-time profession. It was scary to quit my corporate job, but I did, and it is definitely paying off, thank you for being with me in this journey.
@jamesclark4
@jamesclark4 Месяц назад
Theres always hope i didn't give up and life is great rn
@Lucysdad66
@Lucysdad66 Месяц назад
Sweet I'm thinking about picking you to do a build i thing i live by you im not far from bat..
@rustynut1967
@rustynut1967 Месяц назад
It didn't look like you was very comfortable behind it for most of the shots and getting a natural point of aim. It looks like it's going to hammer like most of your builds.
Далее
Borescoping A Rifle: What You Need To Know
22:11
Просмотров 36 тыс.
DIY Barrel Change
34:43
Просмотров 44 тыс.
HOW TO GUIDE to Reloading Ammo for PRS | FULL SERIES
30:34
The REAPR to Replace M240B???
7:25
Просмотров 563 тыс.
Two of the BEST Bolt Actions EVER MADE
24:20
Просмотров 128 тыс.
The Great .280 Ackley Improved, with Ron Spomer
38:26
This .243 is a RINGER!!! [.243 AMMO TEST]
14:15
Просмотров 37 тыс.
New German and French Tanks Revealed!
14:29
Просмотров 267 тыс.