3D Printable Flood & Drain Hydroponic System Time-Lapse ft. SpiderFarmer SE3000

Подписаться 183 тыс.

Просмотров 32 тыс.

50% 1

Hoocho Designs and 3D Prints a Flood and Drain Hydroponic System fitting set for use in Hydroponic Farming at Home.
Flood and Drain Kit:
www.amazon.com/gp/search?ie=U...
Patreon: / hoocho
Time-Stamps
00:00 - Intro
00:33 - 3D Printing the Flood & Drain Kit
04:44 - Building the System
08:52 - Setting Up the Grow Tent
10:36 - Pump and Irrigation
11:42 - How the Flood & Drain Works
14:27 - Media
15:21 - Nutrients
16:36 - Planting into the System
17:23 - Time-Lapse #1
19:29 - Time-Lapse #2
22:03 - Discussion
24:07 - Irrigation Frequency and Duration
26:08 - Outro
Spider-farmer Website link: bit.ly/35YaziI
SE 3000: bit.ly/Spiderfarmer300WSE3000...
Hoochos explores the worlds of Hydroponics, Aquaponics, Permaculture, Homesteading, Fermentation, Technology and DIY Builds to look at the world through a larger lens that can incorporate the best of everything into a rich and rewarding lifestyle.
Through self sufficiency we can reduce consumption and increase our hyperlocal household production.
------------------------------------------------------------------------
STL Files are Available on the Hoocho Patreon:
/ hoocho
------------------------------------------------------------------------
Contributions to the Channel:
www.paypal.me/HelpHoochCreate
------------------------------------------------------------------------
Equipment I Recommend:
------------------------------------------------------------------------
High Quality Combo PH & EC Meter:
HI9813-6 Portable pH / EC /TDS /Temperature Meter-
amzn.to/3ChDrNZ
EC Meters:
Bluelab Truncheon EC Meter-
ebay.us/kGy91u
amzn.to/3ChCYvd
PH Meters:
Bluelab PH Pen:
ebay.us/MMOd3H
amzn.to/3hAZw26
3D Printer:
Creality Ender-3 Pro-
ebay.us/nuKGSK
amzn.to/3ElapP6
Wyze Cams for Plant Time-lapsing:
Wyze Cam V3-
amzn.to/2Xo4xnu
Wyze Cam Outdoor-
amzn.to/3hyz3Cg
Physical Rain Gutter Grow System Ends:
worldgraceproject.org
Float Valves for RGGS:
ebay.us/JFKKyG
amzn.to/396YWEm
Cheap Printer Filament AUS-
ebay.us/5vEbU3
------------------------------------------------------------------------
Merch:
------------------------------------------------------------------------
Teespring: teespring.com/stores/hoochos
The Shirt I Wear: hoochos.creator-spring.com/li...
------------------------------------------------------------------------
Social Media & Contact
------------------------------------------------------------------------
Patreon: / hoocho
Facebook Group: / 734980197112269
Reddit Community: / hoocho
Facebook: / hoochos
Instagram: / hoochos
Business Enquiries: contacthoocho@gmail.com
------------------------------------------------------------------------
If you have personal queries about hydroponics or other matters please join me on Patreon for limited individual support or post in the Hoocho Reddit community or on the Hoocho’s facebook group and there are a lot of friendly helpful likeminded people that may have answers for you.
------------------------------------------------------------------------
Happy Hydroponicing!

Наука

Опубликовано:

11 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@shannonrobertson7212 Год назад

am I the only one who gets, "welcome back to hoocho's" stuck in my head :p

@GregoryCarrier 2 года назад

Fantastic. I really like that kit. Within a year, Hoocho will be printing pump parts.

@joshuanormanrusso-batterha5644 2 года назад

Awesome time-lapse

@TobyRobb 2 года назад

This videos has come a great time because I am ready to try some flood and drain with clay media! Not indoors, but I think it's going to be a lot easier thana bell siphon for me.

@danielbermejo229 2 года назад

Thank you for this excellent video as always, you have very clever ideas! I will definitely try this

@assog5737 2 года назад

Wow, very impressive

@rory88smit 2 года назад

very cool channel! tech and growing!

@rerz 2 года назад

I was designing something like this a few months ago for small scale systems I'm building for myself based on ikea trofast boxes. I got busy due to uni so I had to put it on hold but I might just use this 👀

@Hverhvarhvert 2 года назад

Cool idea!

@Makermann 2 года назад

Nice Sound Good Grower Good Job

@bobby.schlueter Год назад

I have been wanting a 3D printer ever since the Ender 3 came out, but have been putting it off for a bit to allow the space to mature. After watching your video's, I realized we are at that point now, so I am super excited to have a printer in route to me :) I haven't used ebay for years, but found one new for $100 off Amazon's lowest price. I am going to have to keep a better eye on that!!! So far, I have been having very good experiences using them.

@moongloomable 2 года назад

Great design. That is always a problem I have with ebb and flow the roots growing in to the drain/input. Your design would help because you could see it happening instead of being buried in hydroton. Cool timelapse and camera dolly! You need a PAR meter.

@sherichesser1783 2 года назад

Cool, thank you!

@matthewearle2240 Год назад

awesome design separate the inlet and outlet with a wall in between to help force water through and around then down the drain

@Spruce_Bringsteen 2 года назад

Lured me in with King Gizzard and now I own a 3d printer, thanks for that ya jerk

@Hoocho 2 года назад

This was my plan all along.

@Nick-xy8fu 2 года назад

hi Hoocho, always grate watching your content you make it simple to follow even for a novice like me, just want to ask you who did your paintings in ya office as I have some that look like they could be from the same artist . keep up the good work .CHEERS!

@tearaway2485 7 месяцев назад

Love your videos mate. The flood and drain you need lot bigger drain pipes, lest double your in pipe size, faster you can get the water out the more oxygen you will force down into the roots though the clay or what ever base you use.

@peterhache2012 Год назад

G'day Hoocho, you might want to try to leave your reservoir pump on for 10 minutes for feeding. It gives the plants a reasonable time to absorb what they need. I also add air pump and an air stone to the resevoir.

@SeamusHarper1234 2 года назад

I love that you designed this system, I always wanted to design my own, now I don't need to! Btw. don't use TPU as a sealing agent, you can use cheap o-rings instead... They are so cheap... Also, after watching most of the video: I think they might be leaking, because you have to seal two times, one time under the box (like you did) and one time on the bottom of the box. I think it might be better to increase the hole size of the box, so it does not interfere with the seal of the flood / drain valves. You would mount them like the commercial ones and put the box over them to protect the valves from media & roots. There is also the option to simply not use the box, if one decides to cut the cost even more. Or use the box with commercial valves. You could even leave the bottom of the box open!

@69RGH 2 года назад

Gives me a reason to buy a 3d printer!

@ryanlaws1721 2 года назад

Love the idea, well done. Have a suggestion not sure if its a good idea or not. Have you considered creating a bell siphon kind of drain on the right side instead of overflow? I just ask because looking at the diameter of the input and output they look pretty close to the same diameter so flow rates will be similar. My thinking is if its a bell siphon drain it will suck that nutrient out and drain much faster giving the roots more exposure to oxygen? Just an idea, I know its running on a timer so regardless roots will get plenty of oxygen :). Those root systems look solid 💪 Either way love the idea mate you're a legend and love the time lapse stuff 👍. Keep doing what you do.

@SeamusHarper1234 2 года назад

I dont think a siphon is a good idea, it will leave water in the system if the pump shuts down at the wrong moment, like water at 80%, siphon trigger will be 95%. You still need the reflow through the pump to clear the rest.

@machinemademan 2 года назад

all you need is for the overflow to be a size up from the pump hose so it never backs up

@NautiRulz Год назад

I spy with my little eye...is that a Marshall fridge next to the desk...?😁😁

@dadadaa2034 Год назад

You need two seals on each penetration. One in the box, one between the box and play pool. What about creating silicone seals with a mold and a tube of silicone from bunnings? Inject into the mold, Let it set for a few days and then peal them out to finish curing.

@mkv5956 2 года назад

Suuuuuppper Maan 💯👍❣️👌🙏

@CharlieRockRock 2 года назад

Can the drain pipe be turned into a bell siphon?

@Lobbytime1988 2 года назад

Just a friendly tip McMaster car gives 3d models of most ot their products that you can import directly into fusion 360. I had to use this because you can't draw a NPT thread on fusion I simply used the McMaster model just for threads. I've used it on their 3/8 NPT sprayer in my cloner. 9$ a peice in brass 10¢ of petg. 😁

@johnmcginnis5201 2 года назад

Great video. But I am curious if any Ozies can answer. He mentions toilet seals. Surely those are not seals for the exit flue on the bottom? (We Yanks use a wax ring.) So exactly what are they sealing?

@ramoneoliveira5851 2 года назад

Maravilha...

@lyndalllohman303 2 года назад

How do you decide which plants grow best in which system? I have an NFT for Greens and a rggs for fruiting. Considering adding one of these to sit on top of the IBC for the NFT which could connect to either res (NFT or rggs).

@benson9328 2 года назад

I want one 👍

@machinemademan 2 года назад

im running a 3x6 ebb and flow table indoors...ive used 4 inch rockwool on a bed of hydroton for years....is there a better way? i cover the top with white and black poly and put the larger cubes underneath and cut Xs where the rapid rooters socket in..it has reduced water usage and totally eliminated gnats and algae..this one change has made using beneficial bacteria possible without it getting super gross.

@reinux Год назад

FYI, if the filament estimate is lower than in reality, that could be because your printer's printing too fast or the temperature's too low for it to fully extrude. Nothing wrong with that as long as you're happy with your part, but something to keep in mind in case you ever have issues with weak prints or what not.

@EmpressOfExile206 9 месяцев назад

Where is the tent located where you go _that_ long w/out knowing the light is on 24/7

@aaronroberts2642 Год назад

What CAD program are you using to design your parts?

@Floreypottery Год назад

All I’m gonna say is get a light meter it’ll help tremendously with getting the right PPFD levels

@copperchaz 2 года назад

I'll think you find, the tomatoes prefer the title short in stature - keep up the good work

@Hoocho 2 года назад

‘Vertically challenged’

@VladsMadness 4 месяца назад

would the plastic used in the print need to be food grade ?

@lukesalter-ec3hh Год назад

Try cheap silicone percolator seals.

@chrisz.9974 2 года назад

2 nuts. Got it.

@DavidM-ev3fs 2 года назад

Awesome! I'd love to see some analysis of financial breakeven in these videos, and an estimate of time investment over a year.

@Aldertonartco 2 года назад

is that a JCM Marshall amp in the background?

@Hoocho 2 года назад

It’s a keg fridge

@joshuaperez1573 2 года назад

why didnt you drop this last month 😭 i just did a rdwc in my tent, this would have been so much nicer!!! aha great stuff my man!!!

@Hoocho 2 года назад

I actually did in my update vid haha

@joshuaperez1573 2 года назад

@@Hoocho i must have missed it!!! i just stumbled upon you recently after i got my 3d printer and was looking for others who were using theirs for hydroponic stuff as well and since been going back and watching all your older videos!! thank you for all the information youve put out there!! its helped a ton!

@bigdogdazza Год назад

How do I become a patreon??

@ryanhenderson4034 Год назад

put ur fan near the level of ur lights

@derekgore1268 2 года назад

Hoocho, perhaps try shifting the seals to the underside of the kiddie pool. If the outside bottom surface of the kiddie pool is smooth, you could well stop the leaks. Tighten the nuts a quarter turn using an adjustable spanner.

@andreamitchell4758 2 года назад

I think that is a waste of hydroton , you could use 5 inch netpots and only put hydroton in the next pots

@GregoryCarrier 2 года назад

I purchased a Hydrofarm system that works that way. Easy to pull a pot and replant it, too.

@herban_garden 2 года назад

I’ll politely disagree. If the tomatoes he originally had went full term, nearly every inch of that bed would be full of roots. Also, you can’t waste hydroton… it’s reusable.

@andreamitchell4758 2 года назад

@@herban_garden yes I know it is reusable but it could be put to better use I think so what is the downside to having the roots in the bed in a ebb and flow system? is that bad if so why is it bad and would it help if the top was covered up with a sheet styrofoam of maybe some plastic and mylar? is it a danger of the roots getting too dry? I think that them getting all that light is not good though

@bradcarby3765 2 года назад

While buying a bunnings basket from a tip shop is not theft, it is probably still receiving stolen property because you know no one bought that from the hardware.

@Hoocho 2 года назад

There’s major stress marks on the basket that look pretty horrific, you can see them in the video, my guess is that Bunnings was thinning out their damaged baskets and the tip shop salvaged them.

@kayaddicted Год назад

I know this video is a bit older but I've seen you struggle on pronouncing imperial measurements a couple times now. The way us backwards American's would say it is "One and three eighths inches". So the whole number followed by "and" followed by the fractional. If the measurement was longer we would say something like "three feet, five and three quarter inches"