No video :(

3D printed Planter with 1MM CHT nozzle - Fuzzy skin

Подписаться 35 тыс.

Просмотров 10 тыс.

50% 1

Wife wanted a planter, and I wanted to play with my 1mm CHT nozzle :) So I used this awesome model base found here: www.printables... and then I designed my own planter that would print good with vase mode and that big nozzle. Experimented with Fuzzy as well. Turned out pretty cool. Wife is happy, happy wife = happy happy me :)
Printers:
-full Vz235 printer kit: s.click.aliexp...
-Full Vz330 printer kit: s.click.aliexp...
Printer Parts:
-X Vz-Beam: s.click.aliexp...
- Waterpump kit I use here: s.click.aliexp...
-240mm Radiator: s.click.aliexp...
-120mm x2 fan: s.click.aliexp...
-Vz-HextrudORT watercooled : s.click.aliexp...
-Vz-HextrudORT Plus: s.click.aliexp...
-Goliath watercooled : s.click.aliexp...
-Fly Super 8: s.click.aliexp...
-Drivers s.click.aliexp...
- XY Motors: s.click.aliexp...
-Alu Water cooling blocks: s.click.aliexp...
-Fittings: s.click.aliexp...
-water cooling kit: s.click.aliexp...
-48V PSU: s.click.aliexp...
-CPAP fan: s.click.aliexp...
-CPAP tube: s.click.aliexp...
(complete part list can be found on the BOM list on github link below)
-Eibos filament dryer: s.click.aliexp...
Full VzBoT Printer project: (BOM, cad, stl): github.com/VzB...

Опубликовано:

12 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@Dennzo1337 2 месяца назад

Somehow the 1mm Pot looks like its made out of Spaghetti, quite funny. I have to thank you for all the work you put into your VZbot Project, it inspired me to finally do something creative again so i converted my old Ender 5 to a 70% Vzbot. I had to sacrifice some build volume down to 225x225 but i dont care, the print speed is phenomenal aswell as the quality. i gathered a lot of knowledge while building, its still not finished but im really happy with the result so far. Thank you for making the whole VZbot Project open source i think its a great enrichment for 3D Printing enthusiasts and makers.

@TurboSunShine 2 месяца назад

😍 love the 1mm print!

@Andrew_Fernie 2 месяца назад

Looks great! CF doeas a nice job of hiding the layer lines.

@Vez3D 2 месяца назад

Definately! Thats why i print most of my stuff with cf stuff :)

@WENZELLWERKS 2 месяца назад

Spends countless hours and money to build a precision speed machine... and then proceeds to turn fuzzy skin on. :D

@thimiraamaratunga7794 2 месяца назад

This isn't your average fuzzy skin. This is precision fuzzy skin.

@user-lx9jm1wo3h 2 месяца назад

Can you do a video of your printer running without any fans doing a movement like this? Your motors and hardware are so freaking quiet that I want to actually hear them. lol

@Zodliness 2 месяца назад

I can only imagine the rate at which 1.75mm filament is consumed by a 1mm nozzle. I typically feed my 3D printer 2.85mm filament, squeezed through 0.40mm and 0.25mm nozzles. The polar opposite of this intriguing chunkier wicker basket-like resolution. A 1mm nozzle definitely has a niche for larger 3D prints. If my Ultimaker S3 is capable of accommodating a 1mm nozzle and such high flow rates, I'd give it a go just for the shit 'n' giggles. 😉👍

@aim6mac 2 месяца назад

nice one!

@bcarden133 2 месяца назад

This is cool, but are you ever going to actually finish the documentation for Vzbot?

@notsurt 2 месяца назад

For some reason I'm craving peanut butter.

@oliverclifford1379 2 месяца назад

1mm is so janky but so good. Nice plant pot. Your design?

@Vez3D 2 месяца назад

Not the base.. only the vase mode planter printed in wood

@3dpathfinder 2 месяца назад

Id love to try and review and build one of the 236 or 330. Never built a printer before, if youd ever consider sending one to a newer and smaller content creator 3d printer

@yeldardeerttoille 2 месяца назад

This looks pretty awesome! I'd love to see what 1mm nozzle and .7mm layers do to clear filaments! maybe it'll look like textured glass?

@kennybeaudoin 2 месяца назад

Ahh i see the fuzzy skin. I normally put it more aggresive to look like textured :p youd have to play with it a bit i guess to find a sweet spot but it looks awsome. First part of video looks real clean too

@BrianVoelker 2 месяца назад

So nice to see close ups! On the 1.0mm their were a lot of gaps. Can those be fixed via klipper config value changes or is there no real way to get around that at that thickness?

@Vez3D 2 месяца назад

you can try to fine too gap.. but its only a percentage of the nozzle. I dont think you can 100% get rid of those because of the big radius

@corrupted1850 Месяц назад

Me: *Looks at printer* can i have it?

@weissefabrik Месяц назад

thats my only nozzle for over a year now ... :) the 1.0 cht volcano... vez, if you haven't seen it yet,check the diamondback revo :O

@nils1953 2 месяца назад

Dann that 1mm nozzle print looked so scribbly.. What layer height did you use, or did you use fuzzy skin? Cause my 1mm nozzle prints look just as good as 0.4mm ones, so I can only guess this was on purpose?

@Vez3D 2 месяца назад

Fuzzy skin. With 0.7 layer height :) so yeah its on purpose. I wanted weirdos layers

@Dustmuffins 2 месяца назад

You should try the new scarf joints in Orcaslicer for the base. I use an overlap of 2.5mm, and it looks great and has a negligible impact on print time.

@Vez3D 2 месяца назад

I did.. and its not always been great for me yet. It works good ok 90 degree wall..but not super good on overhang

@christoskaragiannis7973 2 месяца назад

How do the cht nozzles hold up with cf filament? I'm really afraid to use my original copper plated and switch to aliexpress hardened steel with copper inserts clones to print abrasives.

@riba2233 2 месяца назад

They make original bi-metal cht nozzles for abrasive filaments (they are great btw). Regular ones wouldn't last long.

@TheWuzyy 2 месяца назад

can you extend the bed to 336mm in width on the vzbot330? i have a part wich is exactly 336mm long and i want to print the whole bed with some copies of it at once. does the print head cover those extra 6mm in bed width if i extend the bed?

@urban1643 Месяц назад

Hey simon. I am ordering a 330 kit. Is it possible to order with water cooling and aluminium gantry? I don't know what are the other upgrades i think that is it.

@Vez3D Месяц назад

It comes with all aluminum parts. But it doesnt have water cooling ad this is optinal

@tylersutton2216 2 месяца назад

It looks like you need a little bit more infill perimeter overlap encroachment I want to say it's called

@yokaimagna 20 дней назад

Hi, what line width do you recommend for a 1mm nozzle?

@cgrosbeck 2 месяца назад

Simon is that a BEACON on there????

@Vez3D 2 месяца назад

Yep

@tylersutton2216 2 месяца назад

We're not going to talk about the print quality on that damn fan duct

@Vez3D 2 месяца назад

Ok lets not talk about it then 😂

@tylersutton2216 2 месяца назад

@@Vez3D Stupid voice to text print quality your part is very well printed

@Vez3D 2 месяца назад

@@tylersutton2216 haha yeah voice txt sometimes get me too

@kiiiddd 2 месяца назад

Needs a adaptive purge line to get rid of the skirt loop

@jzagaja 2 месяца назад

Simon try ABS+GF: Qidi or Bamboo.

@projectxmarketing3431 2 месяца назад

Nice!

@daliasprints9798 2 месяца назад

Did the CHT survive it? 😂

@alejandrohuerta988 2 месяца назад

Printing with noodles out here

@METKO- 2 месяца назад

First like😂❤

@tytechguy 2 месяца назад

Hey Simon, what do you usually run your steppers at current wise? I have all 3 of my printers set at 2.25a and I've yet to have a skipped step even at really high speed and they don't seem to get super hot either. I was just curious what you run yours at for regular prints.

@Vez3D 2 месяца назад

2.4a with the super power

@tytechguy 2 месяца назад

@@Vez3D awesome man. Thank you! Love the carbon. It looks great