3D Printer - Printing Digital Dental Models with Partial Denture

Подписаться 831

Просмотров 91 тыс.

50% 1

The world is changing fast and technical revolutions are following each other rapidly. 3D printing is one of these revolutions and is currently the fastest emerging technology.
This is an amazing innovation for the dental industry. 3D printing offers unprecedented chances and most probably you have already heard of the unlimited possibilities. Here you can see DTS 3D printing digital models in our lab.
DTS Digital, along with our digital partner Core3dcentres, are able to offer Digital Crown & Bridge Models, Digital Implant Level Models, Orthodontic Models and Prosthetic Study Models.
An accurate and robust model solution is the first step in any successful digital workflow. Precision manufactured DTS Digital & Core3dcentres digital models are the access point to all existing digital and traditional treatment plans.
The days when a stone model of the mouth and manual production of restorations were the best method of delivery dental treatment are long gone.
Song Credit: Golden Grey - Skyward

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@nathpark1626 6 лет назад

very cool. As a dentist making our own cad cam crowns and bridges, is there a class you'd recommend that I could take on making dentures, using a scanner, mill and 3D printer?

@Cosecant18 7 лет назад

How strong is the dentures you can make in comparison to those that is made with acrylic. Also can the printer do custom coloring like marble or multiple colors or is it limited to just making the lab study models. I would also like to know if it is more or less durable compared to lab stone and can it be cut through and manipulated with and glued together with current lab adhesives and wax... or does this require more items to purchase to manipulate the models?

@amauriguerrodutra8440 4 года назад

Tem mais sobre esses equipamentos

@mohamedabdallah4988 5 лет назад

Hi can able to print model and Dies in seam time!?

@sdp826 7 лет назад

Cast Partial design is shown different and then final denture is complete denture design , how come they say that its printing same time...while even denture are also not the same

@dentaltechnologyservices310 7 лет назад

Hi there, these are from a selection of our daily work in our lab, they might not follow the exact same case from start to finish!

@amauriguerrodutra8440 4 года назад

Aqui Brasil

@omartawfeeq4775 6 лет назад

1 question about its accuracy is it the same as the impression one i know it is dimension stable

@ashwinmohan4503 5 лет назад

Hi usually the accuracy would have been previously callibrated with a callibration cube that measures XYZ axis. If found incorrect, it can be added or subtracted in the Gcode. Also, you can adjust it in the model scale, like 100.5% or 99.5%. If properly calibrated, (most modern printers are), then it will print correctly. If by chance we use third party resin or materials, there may be slight difference, but again we can adjust this in the settings. If material and printer is not changed, the corrected settings can be used for all the next prints.

@aaronmiller8477 4 года назад

How long does it take to print one dental model?

@Shaggy8675 4 года назад

I can print them in 60-90 minutes. I am using non-dental SLA printers which are perfect and much more affordable.

@heba_prostho3102 7 лет назад

Was the partial denture framework 3D printed as well ? and from which material ? Thank you.

@dentaltechnologyservices310 7 лет назад

Hi there! The partial denture framework is made of our material PEEK. PEEK is digitally manufactured and is a medical grade polymer that provides patients with an alternative solution to chrome cobalt dentures. You can find out more here: www.dts-international.com/our-products/prosthetics/peek

@heba_prostho3102 7 лет назад

Thanks a lot :))

@heba_prostho3102 7 лет назад

The PEEK framework was milled or 3D printed ?

@dentaltechnologyservices310 7 лет назад

This PEEK framework was milled!

@stefanschafroth7536 7 лет назад

What software do you have the models designed.

@dentaltechnologyservices310 7 лет назад

In our lab we use the 3Shape system but we can work with many different companies and software!

@amauriguerrodutra8440 4 года назад

Pi tudo bem

@FlightIllusion 6 лет назад

I can only say I'm really very dissapointed at the reliability of the Form2 printer. Our company has been using it for 6 months (professiona)l now and only had problems with it, ranging from a not correct calibrated optical system or not recognizing the Resin Tanks. So I think this is a nice printer for hobby purposes , but absolutely not as a reliable production tool. BEANTWOORDEN

@ashwinmohan4503 5 лет назад

I agree! We too had a lot of problems with the Form2. For us, it was the bed levelling and lifting mechanism which had alignment problems. Also, very expensive resin tanks to buy. We have sinced shifted to FDM with the Prusa i3 Mk3 and have had good results. Print with 50 microns and 0.3mm nozzle (tooth prep, inlays, onlays etc) for precision and 100 microns with 0.4mm nozzle for larger work like full models. Really good and consistent results even with cheap Chinese ABS filaments.

@ashwinmohan4503 5 лет назад

PS the curing tank also broke down after 2 months and we are using UV sterilization equipment to cure our models. Real hassle and couldnt train technicians to use the curer and printer.