407 Rust Protection Treatment

Подписаться 48 тыс.

Просмотров 6 тыс.

50% 1

One attempt to protect the underside of a car from rust. As my experience at this is fairly limited i decided to do it on a fairly cheap car a 2006 Peugeot 407 2.0 Executive.
I did the same process 2 years ago on a Honda jazz although that video was not as detailed as this
• Honda Jazz Rust
I learnt most of what i could by reading articles in practical classic/car mechanics magazine, the website rust.co.uk was highly recommended and has great informative articles on the subject.
It seems crucial to have the underside of the car as clean as possible, clean of grease and oils, have any salt neutralised before then going on to remove the rust and bring it back to bare metal.
Bilt hamber underbody and cavity waxes were used in the case of this 407 as they had more favourable postage costs to Northern Ireland. I am not a big fan of waxoyl as it tends to be slopped around the underside of a car being sold by some unscrupulous type to get rid of a problem. The jazz actually has one corner of a wheel-arch that was treated with the stuff after i left it to a bodywork place to have part of the sill welded. The rest of the car is resisting corrosion quite well but the waxoyl has lost its adhesion to the metal.
/ pc2cv

Авто/Мото

Опубликовано:

22 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@henktulp4400 2 года назад

I admire your patience.....it must have taken a lot of time! The quality of your work is high standard;your Peugeot is ok for decades.... One remark...I used to work a lot on Citroen CX’s myself....when working on those cars you must be very aware of the weight distribution...65% to 70% of the weight rests on the front axle....left and right under the car were two strong spots where axle stands can be placed....these were positioned about 20cm behind the front passenger’s feet.....the car was almost in balance when supported on these points!! As I see you working on a two-post lift it makes me wonder how secure your car was....especially after removing so much weight from the back.... I know of a CX that tipped of a similar lift....it totalled the car.... Keep up the good work!! Greetings from the Netherlands,Henk Tulp.

@peugeotCitroen2CV 2 года назад

Hi, thanks for the comment. It took a fair wee bit of time. There was over 15 hours of footage and that was only what got recorded. Hopefully this 407 will last now for a while, the auto-box will definitely be getting an oil change. You are spot on about the weight distribution, thankfully this 407 stayed secure on the lift but i remember when changing the axle on my mums xsara i had to have the Acrow props sitting ready and used a ratchet strap across the top of the back floor to each lift arm. A lift is a handy bit of kit but does require respect. Great to hear from someone from the Netherlands, do you still have any CX's? What is your roads like for rust, is salt used in the winter?

@mibman2003 2 года назад

I admire your efforts and attention to detail, bravo 👏🏽

@peugeotCitroen2CV 2 года назад

Thanks for the comment

@hepson1 11 месяцев назад

Ufff so much work, that I'm tired only by watching. Great!

@user-zt4ry9hm9u 2 года назад

Great stuff, can see you put alot of time and effort in, nice to see, well done!

@peugeotCitroen2CV 2 года назад

Thanks for the comment.

@Ermac407 15 дней назад

This car..so beautiful, looks great

@djordjeradevic3307 2 года назад

Extraordinary job man. I think is better done than factory. I admire steps you take with different products for better rust protection. Well done. Congratulation

@peugeotCitroen2CV 2 года назад

Thanks for the comment, I hope it lasts better than what was on, although in fairness the factory underseal held on well enough for 15 years old it was just starting to reach the point where it is becoming less effective. It is the same type of polyurethane under-seal that seems to lead to most XM's being scrapped these days as the water gets trapped behind it so there was a fair effort made to remove it where it was failing.

@zeez9053 2 года назад

Professionally done

@peugeotCitroen2CV 2 года назад

Thanks for the comment

@oscaraguayo446 2 года назад

Excelente trabajo compañero bravo muy minucioso. Saludos desde. Ecuador guayaquil

@sudinebabz8651 2 года назад

Great job 👏✨👍🏼

@nicolladelli1 Год назад

Peugeot and Citroen, the only car brand that offers a 12-year warranty against corrosion.

@peugeotCitroen2CV Год назад

A lot of older ones still on the road and the most extreme thing some need is an outer sill skin welding in usually the xsara picassos. Although im not sure the newer stuff is quite as good as it used to be. I sold this 407 and bought a 2013 C4 hatch, its a bit ginger in places underneath although still nothing structural.

@nicolladelli1 Год назад

@@peugeotCitroen2CV I have a Peugeot 408 2012.

@olegm9736 10 месяцев назад

@@peugeotCitroen2CV I have Peugeot 407 2.2i 2004 with manual gearbox, I did a lot in the car by my hands, also music through AUX with bluetooth. Nice car what I can say=). I have already painted many elements on the body and alloy wheels. Today it still drives well and is as good as the new ones. I'm thinking of keeping this car forever, and additionally buy an electric one.

@domagojgotic4421 3 месяца назад

excellent job. Why 407 ? That's what i would ask before i bought a 407. Most comfortable car i've ever owned. I only regret not having a 406 😀

@peugeotCitroen2CV 3 месяца назад

This one i suspect needed a set of shocks in it, had a surprisingly firm ride. Although ive been in other 407s that rode better. My mate had a very early 2.1 TD 406 and within about 10 seconds of sitting in it i just fell in love, so it was a straight swap this 407 for the old 406, still driving the 406 at the moment.

@domagojgotic4421 3 месяца назад

@@peugeotCitroen2CV I can definitely understand the swap :-). In my opinion the 406 is one of the most beautiful cars i have seen. And being the old TD engine, is definitely more robust the the newer common rail engines, although the 2.0 HDI is quite a stable and reliable engine. If i would ever find a 406 that had the kind of love put into it like the 407 i bought (first owner, low mileage, regular maintainance) i would definitely swap it to 😀

@SzwarcuKX5 2 года назад

I'm lost for words... GREAT job my man! It's ASMR for a pug guy ;)

@peugeotCitroen2CV 2 года назад

Glad to see you enjoy it, haha ASMR i don't know if its quite that yet. Not the most pleasant sounds if i had kept the original audio at full volume.

@goranjokic4537 Год назад

Perfect👍

@peugeotCitroen2CV Год назад

Thanks for the comment

@KillerkoUK 2 года назад

Not much rust there haha, but well done anyway… you should see my 406, thats one rusty bad boy.. 😅

@peugeotCitroen2CV 2 года назад

Haha not really too bad, im seeing a few neighbours 406es at the moment, admittedly ones used on farms and never washed. The most recent example i went to change an exhaust and there was no jacking points left at all. They are not bad considering the youngest 406 is now 18 years old. Bonnet leading edge and the sills seem the worst areas, any half decent 406 is usually worth patching up but there are some rough examples also.

@moustapharouabah3295 Год назад

I own an identical 407, I would like to do the same type of protection.

@peugeotCitroen2CV Год назад

Hi there, i am thinking of giving lanoguard a go, i think its a lot less labour intensive than having to bring it all back to bare metal but its really only for loose surface rust.

@moustapharouabah3295 Год назад

@@peugeotCitroen2CV What is your price for doing this work?

@peugeotCitroen2CV Год назад

@@moustapharouabah3295 No amount of money could pay me to do it again😂 filthy work you really need to like your own car to want to do it. Although to be helpful i do recall there is a company called krown i think have drive in centres that offer it. I dont offer any car repair services by the way this is all just a hobby, i have a day job in something different to this.

@moustapharouabah3295 Год назад

@@peugeotCitroen2CV I live in France, do you have an address? In which region is this garage ? Thank you for your answer.

@peugeotCitroen2CV Год назад

@@moustapharouabah3295 i am based in Northern Ireland

@benoitbourdaire4194 Год назад

That's a lovely job. Would you take on the same job for a different car? Paid of course

@peugeotCitroen2CV Год назад

Not in a million years haha😂😂 far too time consuming and messy. Im also back at uni this year doing a masters. Although i think in the future i might try something like lanoguard that requires less preparation and just gets sprayed on every few years.

@mustafadogramac6076 2 года назад

Total waste of money and time for this car. But it's interesting to watch

@peugeotCitroen2CV 2 года назад

Absolutley, no chance of it ever recouping the investment in time or money but it was purely chosen as a fairly risk free subject piece for showing how to rust protect a car.

@moustapharouabah3295 Год назад

Hello, Do you have an email address to contact you because I don't have a Facebook account. I find your work extraordinary

@peugeotCitroen2CV Год назад

I keep it all to the facebook account to be honest, haven't had many dealings other than through the comments or the facebook page for more detailed questions.