4500 lbs Pulling Force! NEW DeWalt 20V MAX Rivet Tools [DCF403D1 & DCF414GE2]

Подписаться 160 тыс.

Просмотров 34 тыс.

50% 1

DeWalt launched two brand new rivet tools for handling blind rivets from 1/8" up to 1/4" in diameter. Two different models: the DCF403D1 includes the rivet tool with 2,100 lbs of pulling force, 2Ah 20V battery, and a charger; the DCF414GE2 includes the rivet tool with 4500 lbs of pulling force, two 20V 1.7Ah PowerStack batteries, and the charger. While they are very alike in appearance, power and price are much different. #dewalttools #review #tools
DeWalt DCF403D1: acmetools.pxf.io/75GMY3
DeWalt DCF414GE2: acmetools.pxf.io/m5XGQD
Keep current with our great content:
RU-vid: / shoptoolreviews
Instagram: / shoptoolreviews
TikTok: / shoptoolreviews
Facebook: / shoptoolreviews
Twitter: / shoptoolreviews

Авто/Мото

Опубликовано:

21 июн 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@snowgorilla9789 Год назад

Oh shit, have lived my whole life without the need for a rivit gun until now

@jasonvandervalk3679 9 месяцев назад

I just ordered mine today.

@2down4up Год назад

I’ve got a pneumatic riveter that I used to use the heck out of, but since the brand I work for mostly switched to bolts I don’t use it anymore. Thought I was mostly done with rivets forever until a week or so ago when they launched a new campaign (recall? honestly can’t remember which) where we need to drill a few holes and install a few rivets. I haven’t seen the rivets in person yet, and they only list a part number on the documentation, but in the pictures they look to be at least 1/4” rivets. I believe they said the “locally sourced” riveter needs to have a minimal pulling force of 5,500 pounds. I’m guessing that’s pretty darn high based on this video.

@chrisunderhill8853 3 месяца назад

bet its a huck rivet or huck bolt.

@mauriciohernandez2367 10 месяцев назад

Can you put the 1/4 tip on the other one

@EzTechJoe Год назад

About time!

@markmallory185 Год назад

well done sir.

@slmon66 3 месяца назад

Milwaukee m12 rivet gun pulls 6mm rivets. I’ve got one. Brilliant £160.

@yon_ko5711 Год назад

I been waiting for this tool but nearly $800 just for the bare tool (1/4) I’m not too sure…

@purelifetechnology 3 месяца назад

Would the 1/4" tool shoot smaller rivets like 1/8" and 5/32" if you had the tips for it?

@judeoliveresteron415 7 месяцев назад

Hi sir. I have Dewalt DCF414GE2 i'm just wondering why is it I can only use the big Blind Rivet like (3/16"x1/2") - (1/4"x1/2") while the small i cannot use it like the (3/32"x1/4") - (3/16"x5/16) the nose tip is for big Blind rivet only they didn't include for the small Blind Rivet. Do have an idea where to buy the small nose tip so i can u the small blind rivet. Thank you

@bigyellowjimmy 6 месяцев назад

Does Dewalt make a Huck bolt gun similar to a Milwaukee 2661-20?

@mr.potato1649 10 месяцев назад

I do decorative sheet metal work, we use 1/8" rivets every day. Sometimes several hundred rivets in a day and i used to do them all by hand until i found the milwaukee rivet gun. I was bummed to see dewalt didnt have one out at the time since we use dewalt at our shop. I went ahead and got the milwaukee and its been awesome, really saves a guys hand lol. But the catch for the rivet stems gets loose and falls off all the time and fills up kinda fast so it ends up just getting left off. The dewalt stem catch looks much more promising. Im looking forward to trying it out, and ill be able to swich batteries between it and the drills which will be sweet.

@anakarinareyes131 8 месяцев назад

They suck!! my company does sheet metal too we have had to replace 3 already we are going back to Milwaukee!!!

@mr.potato1649 8 месяцев назад

@anakarinareyes131 really? Bummer I've like all our dewalt drills over milwaukee so far

@Nyall Год назад

Those batteries look different. Oil resistant?

@bread-gz3rl Год назад

Yep

@JuanCheeto Год назад

Does it do hucks?

@SavetheRepublic Год назад

Any videos of rivnut tools?

@3vil3lvis Год назад

Will these do Rivnuts?

@chrisunderhill8853 3 месяца назад

that thing says 1/4 rivet i want to see it do a 1/4 inch Huck rivet. they are Tuff i have a pneumatic and it has a hell of a time staying together i blew though 4 of them building my trailer. same blind rivits they use for Airplanes. Mil spec. my gun is also 4500lbs

@Modine. Год назад

Absolutely no use for a rivet gun but good video. 👍 Nice bench vice too, never seen one like that before.

@butchfajardo8832 10 месяцев назад

Is there a corded version of those riveters?

@kevinromero3990 9 месяцев назад

Air riveter

@nickgibb4687 Год назад

i use my Milwaukee i bought 2 yrs ago daily. its chunky. these look smaller in body size

@jasonvandervalk3679 10 месяцев назад

Same here its a great tools. But seeing the dewalt I want one because they finally made one

@kyledamon480 4 месяца назад

will it pull a 1/4 monobolt?

@Shoptoolreviews 4 месяца назад

You mean like a huck-bolt? No, but Milwaukee has a huck-bolt tool. It's very expensive! Thanks for watching.

@DavidWeinberg-cm9xd Год назад

I have the M12 rivet tool, and it is a little awkward, but does what both those do, in one tool? It has 4 different collets that just screw in the head, depending on the rivet size you need? They are all stored on the tool well? It only has like 2000 lbs. of pulling force, but that is way faster and easier than by hand, and the M12 is an angled head design, so it will fit in places, neither of the Dewalt's will? It will do 1/8" to 1/4" rivets, so I'm very satisfied with the smaller and lighter M12? Just an honest opinion from a real owner of a tool? Thanks for your great reviews, sir.

@bossmanz28 Год назад

The m12 does not do 1/4". Up to 3/16". The m18 one does 1/4" tho. Now my question is if you put a 1/4" nose on the 3/16" model will it work? With how easily it pulls 3/16" it jus seems like why cant it do 1/4"? Unless they physically made sure the stem jus won't fit. I even have a drill adapter 1 that will do 1/4" and its like no problem power wise. I jus dont understand why 1/4" riveters are so expensive. I would pay 3/16" version price but with 1/4" capability cuz i need that

@iwillbnnedafterispeakwhy6498 Год назад

Your m12 does not do what both of these do

@waynekirk4541 11 месяцев назад

The m12 is really slow and underpowered compared to these two, yes it’s small but take the back these and it’ll be a couple inches difference in size. I haven’t tried the Milwalkie 18v version but it’ll prob be on par with this two in power and size .