4Runner Gets CV Boots And LBJ's!

Подписаться 254 тыс.

Просмотров 32 тыс.

50% 1

Swapping the CV boots and lower ball joints on the 4runner!!
Follow me on Instagram! / austinniemela
Check out my bumper plans on my website!!!
avrcustoms.com/products/1996-...
Items used in this video:
Right Ball Joint: amzn.to/3yWGOYW
Left Ball Joint: amzn.to/3xLs9Q9
LBJ Bolts
1996-2000 use part #90080-10066 (You will have to order these through a Toyota dealer)
2001-2002 use part #90119-10933. (You will have to order these through a Toyota dealer)
CV Boots: www.offroadsolutions.com/prod...
4runner build list:
Front Bumper: avrcustoms.com/collections/bu...
Smittybilt XRC Winch: amzn.to/3BjOCp5
Wheels: ebay.us/bdMZb2
Tires: ebay.us/WDYaPe
Lug Nuts: ebay.us/B11aZw
Front Bilstein 5100: amzn.to/3gEbBDJ
Rear Bilstein 5100: amzn.to/3BmbpRd
Front OME springs: amzn.to/3oE980q
Rear OME springs: amzn.to/3afAIbE
SPC Upper Control Arms: amzn.to/2WKFivo
Diff Drop Kit: amzn.to/2WScrpe
Energy Steering Rack Bushings: amzn.to/3lejvWm
D2S projectors: amzn.to/3afbVom
Panamera switchback shrouds: ebay.us/Aafpuy
Headlight harness: amzn.to/3iEUjXz
Headlight sealant: amzn.to/3ac4PAG
Black side marker lights: ebay.us/ahrUoJ
Tail Lights: ebay.us/14If6u
Grill: ebay.us/RFOLa7
Grill mesh: amzn.to/3mw5rHm
Headunit: amzn.to/3mwVZmW
Deck Plate: amzn.to/3lgSRw1
Right Ball Joint: amzn.to/3AiQzB1
Left Ball Joint: amzn.to/3BjiulE
CV Boots: www.offroadsolutions.com/prod...
Camera equipment used in the video!
Sony A7II Camera: amzn.to/2yprn1p
GoPro Hero 8 Black: amzn.to/31avsTg
Tripod: amzn.to/35P7oY5
Send me stuff!
PO Box 133
Chattaroy WA 99003

Развлечения

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 87

@1lionconqueror 3 года назад

Great informative video. You and Timmy tool man do the best, and most comprehensive 3rd gen tutorials!

@EnriqueReyesJrREALTOR Год назад

Nice that you showed torque specks. You also showed enough and not to much on how to do it. Great job!

@bernardcarpenter6949 3 года назад

You do things I wish I knew how to do for my 2012 Tacoma. Still it's great to see what you accomplish. Thanks for sharing.

@hiredgoon4269 2 года назад

I'm about to do this same exact procedure tomorrow. Thanks for the video, this helps a lot.

@doughboy1966 3 года назад

Never thought about the boot stretch.

@wfyfwfyf 3 года назад

To torque that big nut I put on a lug nut and use a jackstand to keep the hub from spinning.

@WeekendWrenchTurner 3 года назад

Love this channel for all the great Toyota content. Really appreciate all the details on your wrenching you do. One thing that I hope you could point out since you have a lot of viewers is on the torque of those 4 bolts on the LBJs . Yours had the LBJ dust covers, which are a different bolt and a lower torque value (37 ft/lbs). But, if you've got '99 and lower, they don't have those dust covers and require a different bolt with a 59 ft/lbs torque value. Been a lot of confusion on that. As always, great stuff👍🍺

@DARKHORSE262 3 года назад

Fixing up my 93 yota pickup 4x4....it's slowly getting there 👍

@ryanbrooke9917 3 года назад

Your videos are awesome bro… glad I found your channel 🤙🤙

@jaypasquarille8580 3 года назад

Pretty awesome work you do there

@Shrek-is-Love 3 года назад

Nice job! I had my driver side LBJ blow in a parking lot, could have been really bad.

@touck5398 2 года назад

Thank you sir for share or teaching me how to change tire&wheel🙏🏻😁

@Asian_Connection 3 года назад

U make it look so easy!

@ludwinalas 3 года назад

I got a 98 4 runner limited... learning a lot from your vids.. thank you man...ur runner looks way better though...lol

@lunchboxproductions1183 2 года назад

When you're hammering on a ball joint or tie rod end to get it to pop loose it helps a ton to back up the other side with a small sledge or decent size hammer.

@wfyfwfyf 3 года назад

You're supposed to use the c-clip instead of wire to hold the pice of boot. Use the same c-clip that goes on the end of the shaft that holds everything together. The boot kit should come with a new clip to use on the end of the shaft.

@conservativeokie 3 года назад

Ah, Austin… How about a matching rear bumper to the front? Just sayin’…

@diyjeff1838 3 года назад

Nice work!!

@Anthxoy 3 года назад

Such a clean looking truck

@frankiea6482 3 года назад

Good job. You are a talented mechanic 👏👍👌💥😉

@MussaKZN 3 года назад

I actually think he is a wizard, he just hasn’t told us yet!!

@frankiea6482 3 года назад

@@MussaKZN 🤣👌💥

@austinniemela 3 года назад

Thanks guys 👍

@darciwalter3919 3 года назад

Cool 4Runner 🤠😎👍🏻

@NoLimitsFunGarage 2 года назад

sick front bumper

@AatAdam 3 года назад

If the lower ball joint bolts have a washer it is 37 ft-lbs if they are flange type bolts they are 59 ft-lbs

@bud7707 3 года назад

Just found Scotty kilmers favorite channel all you need is a Corolla, also the cv Alex’s are easy to replaces I’ve done that view times abusing the taco.

@ulysse4296 3 года назад

👍 you have beautiful 4x4s

@gravureind.lepage2156 3 года назад

Nice, great how to thanks !

@austinniemela 3 года назад

Glad it was helpful!

@staleyexplores 3 года назад

gosh this is a cool rig, let me know if you decide to sell it.

@zwagoner3 10 месяцев назад

Thanks for the video. I’m about to do mine. 2 years later how are they holding up for you?

@snapfish89 3 года назад

Tourqe the axle nut. We just throw a pin in between the brake caliper and disk vents.

@justinbatchelor2418 3 года назад

On my 94 toyota pickup, the whole assembly with shaft and boots already installed was just a couple dollars more than just the boots kit. I guess the down side is that there not oem shafts.

@DuanDao 3 года назад

might i suggest your next project be a 100 series LC/LX :) be good then I can follow along on my LX

@TheDeadwood11 3 года назад

Front rotor trick. place a screwdriver into the cooling vents rotate rotor till screwdriver contacts brake caliper then break nuts. no second hand or other devices needed.

@AlexKloehn 3 года назад

Exactly what I do, except I use an old punch so I don't damage my screw drivers😂

@Ashoud_Anobetah 3 года назад

if you did not do a front differential drop, be prepared to change these boots again in the near future, its the only fix I had after the lift to help reduce the CV shaft angles and prevent the boots from getting higher cycling during bending which causes the rubber to fail

@marcuspalau8327 Год назад

Really? I've had my same cv boots for 3 years now, only "upgrade" was silicone cv boots. I extended the boots as well.. no issues for me so far. I have a OME 3" lift, no diff drop, OEM cv axles, silicone boots.

@leongayadeen7772 3 года назад

Sickkk

@jimmadonna1436 3 года назад

Damn, that made a MESS! I used the paint mark idea on my drive shaft and companion flanges to make sure that they were balanced. I broke a lower fork pinch bolt on the steering stem on my Dirt bike, and broke 2 easy outs. I opened it up to try and chisel it out. It just broke apart. Do you have any idea what I should do?

@jamesacland1041 3 года назад

Can't believe those things don't have locking hubs. Must be a lockup in the gearbox. I blew a front CV and just left the front hubs unlocked. I was able to drive the thing home.

@jack-heights 3 года назад

I have a 97 4runner, I think I'm going to replace the Lower Ball joints on mine. I should be good to use Non-OEM right?

@CaptainGSR 3 года назад

Are you getting any vibrations on the freeway with the new repacked CV boots?

@kflo1219 3 года назад

Doing this as well…have you seen Timmy the tool man inner boot stretch mod using section of old boot? Makes ribs spread some and keep from rubbing! Great mod! Lol my bad…finish the video dummy😂

@dr.emilschaffhausen4683 Год назад

Just noticed one of mine is torn. It's probably been that way for a few months. If I put on a new one and greese, can I get more life out of the drive axle, or does it need to be replaced since the boot has been torn so long?

@gadiartlover6320 2 года назад

Is cv boots are gone damage due to extra height gain for car. Please mention.

@mandomouse6071 Месяц назад

What size was the axle nut? Apparently mine is bigger than a 38mm. Idk how if everyone else's is like a 36mm.

@CB-hr6zs 3 года назад

I gotta do both of these repairs on my second gen 4Runner 🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

@Tanner731 3 года назад

those boots you got from off road solutions are porsche boots, you can get them for like $7 at the parts store if you need more of them. probably something you need to do on the tacoma project

@Erik6920 Год назад

Lol wish I knew that before I bought them

@seanmoncayo8296 Год назад

what parts store? I need to do a reboot and am trying to decide where to get them

@alexalessandro2147 3 года назад

gostei do video da troca da homocinetica

@taigatapia7900 Год назад

Is this for a 2wd only? might take this project on this weekend

@brucewayne2773 3 года назад

2001 and 2002 lower ball joint bolts with washers should be torque to 37 lbs, earlier models 96 to 2000 with flange bolt torque is 59 lbs.

@xactley379 3 года назад

where did you get the coilovers?

@jdmDC2ftw 2 года назад

Do 3rd gen 4runners and 1st gen taccomas share front cv axels?

@austinniemela 2 года назад

Yes they do

@charltonmoore452 3 года назад

It would be cool to see you do a VW TDI Safari build. JMO

@tradeMark182 3 года назад

Day 2 of commenting on this and Devin tube for you to go Evo race ... please Austin 💯💯💯

@cotisado16 3 года назад

Actually, this is a nice idea! Please Austin 👍🏻

@tommcl8548 3 года назад

👍

@4bvenom733 Год назад

Red Boot High Angle cv is it worth it or this boot is good for a 3.5 lift

@Erik6920 Год назад

Red is good for 3” and above. I just lifted mine and ended up ordering new boots the same day haha

@neilmcdaniel6819 3 года назад

Hey Austin. How timely, I'm about to reboot my '97 CVs as the inner boots popped after installing a 2-1/2 OME lift. In Timmy the Toolman's video he says to drain the front dif. to keep from making a mess when you pull the half axle. Is it necessary to drain the dif? Thanks for the post!

@CJfishing2024 3 года назад

If you haven't change the diff fluid I would drain it, I changed the fluid on my tundra diffs at 30k, seeing how my tundra only had 44k when I put new axle shafts in them, (didn't really need them I just wanted all new parts because of the age of the truck (05 Limited) I elected to just top it off when I installed the new ones, not much came out when I pulled them though, I did replace the seals on the diff something to consider if you have high mileage/age.

@austinniemela 3 года назад

I had just a couple drops, I’d say you shouldn’t need to

@adamdubeau8038 3 года назад

Hey Austin, are your bumper plans in DXF format? My buddy has a laser CNC and can cut them out for me. I think sketchup make is free and you can lay them out and save in DXF format

@austinniemela 3 года назад

Yes i have the DXF file

@dariovs6343 3 года назад

👏👏👏👏

@austinc5144 Год назад

my torque wrench only goes to 150 ft lbs you think i will be okay ?

@javier4764 3 года назад

👏👏👏👏👏

@SalemAbuOmar 3 года назад

when u install the engine

@sleepyneko3191 3 года назад

demo ranch shirt?

@alt3523 3 года назад

Personally - I would of just replaced the half shaft - few bucks more but peace of mind

@maxi-kw6mg 3 года назад

Crak

@maxi-kw6mg 3 года назад

Saludame en algún video

@rampagedingo 3 года назад

How big is the lift?

@austinniemela 3 года назад

3” lift

@rampagedingo 3 года назад

@@austinniemela awesomeness right there.

@gufiaito69able 3 года назад

Please buy a 1st gen 4runner and do your thing

@corytryon6374 3 года назад

💯🔥🔥🔥🤘🏻👊🏻😁

@scottkailey1 3 года назад

I don't see a benefit in that boot mod?? Am I missing something?

@kevinjustkevin7627 3 года назад

Lifted IFS Toyota front ends cause the boots to rub the fins together. This causes wear and the boots will fail in that location. If you open up or stretch the boot out, you basically increase the distance between the ribs increasing the life span of the boot.