Тёмный

Upper Balljoint Replacement - 3rd Gen Toyota 4Runner 1996-2002 

PhoRunner Channel
Подписаться 24 тыс.
Просмотров 34 тыс.
50% 1

► Buy me a coffee if I helped you with this video! www.buymeacoffee.com/phorunner
► Support this channel by buying some 4Runner Merch! teespring.com/stores/phorunner
In this video, I show you how I change out the upper ball joints. This method can be done with the steering knuckle in the vehicle. Enjoy!
Parts:
Toyota OEM Upper Ball Joint #43310-39016 (need 2)
Optionally: Toyota OEM Upper Ball Joint Reboot Kit #43324-39015 (need 2)
Aftermarker Parts:
SPC: amzn.to/39KScdR
JBA: jbaoffroad.com/jba-std-high-c...
Total Chaos: www.chaosfab.com/product/1996...
Tools:
Square-ish Piece of Plate Steel www.homedepot.com/p/3-8-in-x-...
Flat Head Screwdriver
3/8" Ratchet www.harborfreight.com/38-in-d...
1/2" Ratchet www.harborfreight.com/12-in-d...
1/2" Torque Wrench amzn.to/3OX5c4X
10mm socket amzn.to/3c2MxGr
12mm socket amzn.to/3c2MxGr
16mm socket amzn.to/3c2MxGr
19mm socket amzn.to/3RmuIlF
21mm socket amzn.to/3RmuIlF
27mm socket amzn.to/3RmuIlF
Proto USA Snap Ring Pliers amzn.to/3Indwsp
Dikes / Wire Cutters amzn.to/3c22i0n
Locking Pliers amzn.to/3IoVu90
Strap amzn.to/3PfzOyp
Angle Grinder amzn.to/3nSBaUd
4 1/2" Cut Off Wheel amzn.to/3bP2z6z
Safety Gear www.harborfreight.com/safety/...
3 Ton Jack www.harborfreight.com/automot...
6 Ton Jack Stand www.harborfreight.com/6-ton-h...
Optional:
3/8" M12 Impact Guns amzn.to/3uATlS4
3/8" M12 Ratchet amzn.to/3uBKT4S
1/2" Makita Impact Gun amzn.to/3AGs5W2
O-Reilly's Rental Tools:
Balljoint C Press 67045 www.oreillyauto.com/detail/c/...
4WD Ball Joint Adapter Kit 67048 (only O'Reilly's has this) www.oreillyauto.com/detail/c/...
2/3 Jaw Puller 67022 or 67020 www.oreillyauto.com/detail/c/...
Useful Information:
Factory Service Manual Section SA-67
Upper Balljoint Castle Nut Size: 19mm
Torque: 80 ft/lbs
Upon further research, someone has found an even easier method (no cutting) for the upper balljoint. Have a read: www.toyota-4runner.org/3rd-ge...
► Buy me a coffee if I helped you with this video! www.buymeacoffee.com/phorunner
► Support this channel by buying some 4Runner Merch! teespring.com/stores/phorunner
Disclaimer:
Due to factors beyond my control, I cannot guarantee against improper use or unauthorized modifications of this information. I assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond my control, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not me. Enjoy my videos.
As an Amazon Associate, I earn a small commission from qualifying purchases. This cost you nothing and helps support my channel! Thanks!
First Light - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-first-light
Music promoted by Audio Library • First Light - Atch (No...

Авто/Мото

Опубликовано:

 

8 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 110   
@joestanosheck1453
@joestanosheck1453 Год назад
Just finished the job! Thank you for the cutoff idea it worked great. I ordered the same c press. I was able to get the ball joints in about half way with the Milwaukee lil stubby and a deep impact socket. Than used a 3 foot cheater bar and it went in nice and smooth. I am so relieved this job is finally done. 🎉🇺🇲👍
@PhoRunner
@PhoRunner Год назад
Nice ! Glad I could help
@joestanosheck1453
@joestanosheck1453 Год назад
Thank you for the in-depth video. Especially going over all of the tools. 👍🇺🇲🛠️
@PhoRunner
@PhoRunner Год назад
Indeed sir
@vinceleal9336
@vinceleal9336 Год назад
super awesome detail!! you covered absolutely all the points on how to do this. Thanks for making our lives easier.
@PhoRunner
@PhoRunner Год назад
No problem!
@4rft5
@4rft5 2 года назад
nice to see you back, love your stuff & how thorough it is
@PhoRunner
@PhoRunner 2 года назад
Thanks!!
@04DCTaco
@04DCTaco 3 месяца назад
Great video, and thank you! Just finished both sides on a tacoma following your steps. Great work!
@bajar.m.6953
@bajar.m.6953 Год назад
It can not be better explain the way you did. Awesome 👏
@PhoRunner
@PhoRunner Год назад
There is a better way! When I get an opportunity, I will show it but I linked an post in my description on the best method!!
@a_tacolypse
@a_tacolypse 2 года назад
Great video Minh, you definitely made it look easy, that upper ball joint is a pita
@PhoRunner
@PhoRunner 2 года назад
With the right tools and technique, it’s not too bad!! Took 2 hours with filming for one side and 1 hour without filming for the other :)
@georgekopsias9159
@georgekopsias9159 Год назад
I love the step by step detail. Thanks for the video, I just subscribed.
@yallgonemadd3786
@yallgonemadd3786 2 года назад
excellent !! thanks for your time in filming this !
@PhoRunner
@PhoRunner 2 года назад
Glad you enjoyed it!
@brianwilson1145
@brianwilson1145 Год назад
Thank you so much for making this video. Helped me a lot
@PhoRunner
@PhoRunner Год назад
Anytime !
@kevinw.8946
@kevinw.8946 11 месяцев назад
Thanks a lot, another one of your videos to get me through a project!!
@PhoRunner
@PhoRunner 11 месяцев назад
No problem
@seanware719
@seanware719 Год назад
Great step by step video. Thanks man
@PhoRunner
@PhoRunner Год назад
No problem!
@aldomassa7473
@aldomassa7473 Год назад
Outstanding Pho !
@PhoRunner
@PhoRunner Год назад
Thx
@mishomishev3152
@mishomishev3152 2 года назад
Awesime video as always
@PhoRunner
@PhoRunner 2 года назад
Thanks
@icebear3208
@icebear3208 2 года назад
Great video as always! You should do a video showcasing both inner and outer tie rods!
@PhoRunner
@PhoRunner 2 года назад
thanks for watching!
@martymccarthy918
@martymccarthy918 Год назад
good video Pho!!
@PhoRunner
@PhoRunner Год назад
Thx
@KB-mk9lv
@KB-mk9lv Год назад
Well that saved my summer!
@PhoRunner
@PhoRunner Год назад
Nuce
@jdmDC2ftw
@jdmDC2ftw 2 года назад
I think you could rent the "4wd cup kit" or whatever it's called from O'Reillys aswell
@PhoRunner
@PhoRunner 2 года назад
Yeah that’s what I used
@jdmDC2ftw
@jdmDC2ftw 2 года назад
@@PhoRunner sorry I commented before I saw the entire video. I think there's a kit that you can use so you don't have to cut the threaded part on the ball joint that attaches to the big c-calmp.
@danz1910
@danz1910 4 месяца назад
Thank you very much brother!!!!
@riverahector559
@riverahector559 2 года назад
Haha, i unsubscribed thinking you sold it, good to know you still 4run!! Subscribed!
@PhoRunner
@PhoRunner 2 года назад
Lol ouch
@leonmoorenatureexperience
@leonmoorenatureexperience 2 года назад
As always. Really enjoyed this one. I did not saw a notification. I have the bell 🔔 on as all. Hmm.
@PhoRunner
@PhoRunner 2 года назад
lol bummer! Not sure what's going on!
@maxuptventertainment3274
@maxuptventertainment3274 Год назад
I had really good luck with the freedom off-road UCA's with upper ball joints. Larger control arms that fix the positive camber from the Bilstein lift. Those upper ball joints are good, but with the lift they are stressed much more than when the truck was at stock level.
@PhoRunner
@PhoRunner Год назад
They are fresh now! We’ll see how they do
@40koki
@40koki 10 месяцев назад
Good job Doctor.thanks.
@PhoRunner
@PhoRunner 10 месяцев назад
You are welcome
@martinsmuyene1033
@martinsmuyene1033 Год назад
Hi guys, I like very much your channel and have a good contents too. I got a Toyota Prado S90 and I would like to know whether is possible to swap the front suspension to a Toyota Hilux D4D or prado 2005 duo to lower ball joint issue?
@phesojanul5272
@phesojanul5272 Год назад
Love your vids! Do you think you could make a playlist of all your videos containing fluid changes for a 3rd gen 4Runner? Thanks!
@PhoRunner
@PhoRunner Год назад
I think it’s under maintenance playlist
@tankarian1987
@tankarian1987 5 месяцев назад
good job
@kaeeroyal3124
@kaeeroyal3124 9 месяцев назад
Hello, your really knowledgeable about these 3rd gen 4 runners. I been wanting one for a while. But I here that these rust amd they have alot of issues, is there a specific year that I should avoid within these 3rd gen?
@PhoRunner
@PhoRunner 9 месяцев назад
They all rust in the salt belt areas. Buying one in a non rusty location is key.
@maisyray
@maisyray 2 года назад
Another great video, Thank you. now that you've had your Bilstein's on for a while would you still recommend them or another brand - say the Fox 2.0 or Toytech -Icons?
@PhoRunner
@PhoRunner 2 года назад
I don’t have any experience with those. The Billy’s seem fine for me.
@phuckmarriage1178
@phuckmarriage1178 Год назад
Very thorough in your videos, awesome stuff. Do u think upper control arms with upper ball joints from a 5th gen would fit on the 3rd gen? The orientation of the ball joint on the 5th gen uca has me concerned if it will fit onto the spindle of my 3rd gen??
@PhoRunner
@PhoRunner Год назад
Like not and likely different mounting as well
@merrieharp3080
@merrieharp3080 Год назад
Hey. I’m not sure how to get in touch with you but first of all, we LOVE your channel!! So helpful, thorough, informative! Please please help, I’d like to get help doing my wheel bearings. I’ve been looking for a video like this but haven’t been able to locate one from your channel. TY!!
@PhoRunner
@PhoRunner Год назад
It’s in my manual hub video. Check it out since I rebuild the entire front spindle in there and that includes the wheel bearing
@PhoRunner
@PhoRunner Год назад
Find me on Instagram. Check my video description for info
@merrieharp3080
@merrieharp3080 Год назад
Thank you so very much for such a quick response! I’ll go and look for you on instagram.
@nelsoncandelario8665
@nelsoncandelario8665 2 месяца назад
Hi you have video how to install gasoline tank. For 4Runner 2000?? Thanks
@Seeerton
@Seeerton Год назад
just curious what kind of grease do you recommend for reboot
@PhoRunner
@PhoRunner Год назад
I used the one that came with the boot kit
@mr.cuttystabby5331
@mr.cuttystabby5331 Год назад
What was the ride height on this runner? I see the bilsteins, and it doesn't seem like you have extended brake lines. I'm getting ready to install a 2.5" lift and am currently waiting on extended lines, but am curious if I should wait for those or just get everything installed first
@PhoRunner
@PhoRunner Год назад
Not needed for front. For rear, this is fine without extending brake line. This is a 2” lift
@ernestogarcia8014
@ernestogarcia8014 Год назад
Since I’m doing the whole assembly of, lower/upper ball joints, inner/outer tie rods, sway-bar links, and both control arm bushings, would you recommend that I just remove the control arms entirely and work on the joints all separated? Also does the order matter? Thank you for the input!
@ernestogarcia8014
@ernestogarcia8014 Год назад
Also installing some new Bilstein struts
@MsPorororo_chickengamer2728
Very detailed video…!!!🤙🏽…what brand of jaw puller you have.? TIA
@PhoRunner
@PhoRunner Год назад
Otc
@defectahz6399
@defectahz6399 Год назад
would the Moog upper ball joint be okay? or do I treat this part just like the lower ball joint?
@PhoRunner
@PhoRunner Год назад
Should be ok but likely your uppers are fine! Just reboot?
@skya297
@skya297 Год назад
Sir, I am from the 559 and have fell into a 2000 4runner with 86k miles, do you do work on them? If so, I would love to talk to you about maybe a project??
@PhoRunner
@PhoRunner Год назад
I don’t work on these for folks haha just make videos to help anybody that wants a little diy
@skya297
@skya297 Год назад
@@PhoRunner Thanks for the quick reply, any recommendations for shops?
@PhoRunner
@PhoRunner Год назад
Timberline off-road, northside 4x4
@JB-fi1zu
@JB-fi1zu Год назад
U ever do the panhard brackets or bar?
@PhoRunner
@PhoRunner Год назад
I haven’t yet
@Mike_44
@Mike_44 2 года назад
How do you test for upper ball joint failure on the 3rd gen 4Runner? Maybe this is the reason why my car is pulling to the right..
@PhoRunner
@PhoRunner 2 года назад
You use a dial indicator. I didn’t show it but the resistance and up and down play i showed should give you an idea. The passenger one was too worn and not within tolerance for dial indicator
@Mike_44
@Mike_44 2 года назад
@@PhoRunner I see. Thank you
@efil4kizum
@efil4kizum 8 месяцев назад
? curious about how many miles on your rig at the time of this task/filming... that RH UBJ had a lot of wiggle in it, is that non-normal? ... I have a '97 taco with 340k and still have the factory UBJs and wonder if they are toasted by now lol... its already roached 3 LH wheel bearings so far and no clue what keeps going on
@PhoRunner
@PhoRunner 8 месяцев назад
230k I believe on this rig
@ernestogarcia8014
@ernestogarcia8014 Год назад
Can a 3 jaw puller work instead of a 2 arm puller? That’s all that’s available to me at the autoparts store
@PhoRunner
@PhoRunner Год назад
Sure can
@BenjiZiggy
@BenjiZiggy 2 года назад
I was thinking to lower my 2002 4Runner. Is there any kits ? Mostly I see the kits to lift it up.
@PhoRunner
@PhoRunner 2 года назад
No such thing exists haha. Stock springs perhaps
@txrunroutdoors
@txrunroutdoors 2 года назад
Why? And how much lower?
@ViofoDashcamOfficial
@ViofoDashcamOfficial 2 года назад
Hi, love your video very much! How to contact you if we want to work with you?
@PhoRunner
@PhoRunner 2 года назад
Phorunner559@gmail.com
@spannersautoandcomputerser1649
Did you also replace the CV axles?
@PhoRunner
@PhoRunner Год назад
We did not. But we need to reboot them
@efil4kizum
@efil4kizum 8 месяцев назад
@@PhoRunner boot kits are on a several month back order as of Nov-2o23
@Emperor_1971
@Emperor_1971 2 года назад
Do you need do alignment after this ?
@PhoRunner
@PhoRunner 2 года назад
Usually yes but Id just get it checked or drive it and see how it feels. this shouldn’t be moving things too much to need an alignment.
@Emperor_1971
@Emperor_1971 2 года назад
@@PhoRunner thanks for the replies n keep them awesome videos coming
@lulutango
@lulutango Год назад
Could you just use a longer 27 mm socket and avoid using the grinder? I feel as though the length of the socket maybe was the only reason it was in the way
@PhoRunner
@PhoRunner Год назад
The puller won’t fit with a deep 27 sadly
@lulutango
@lulutango Год назад
@@PhoRunner ah yes! Thanks! You did mention that in the vid, missed it the first time. I'm trying this exact job tomorrow for a work friend. Trying a Dremel tool w/ an attachment...
@PhoRunner
@PhoRunner Год назад
Take your time haha. There’s another method. Check my video description for link to t4r article. Way easier and no cutting I believe
@ExtremeRecluse
@ExtremeRecluse Год назад
What is the primary cause of the typical death wobble?
@PhoRunner
@PhoRunner Год назад
Wheel balance 95%
@ExtremeRecluse
@ExtremeRecluse Год назад
@@PhoRunner I have had the wobble since I bought my 2002 Runner in 2019. Just mounted new tires and still have the wobble. Next, upper and lower ball joints
@PhoRunner
@PhoRunner Год назад
Swap the tires front to back and see if it wobbles. Believe me, mine wobbled after I changed out the whole front end. Had 3 places balance it and finally got it decent the last time. He used a lot of weights and said most shops skimp and do bare minimum weights. Road force balance helps too
@efil4kizum
@efil4kizum 8 месяцев назад
what do you mean by 'death wobble' ?
@efil4kizum
@efil4kizum 8 месяцев назад
@@PhoRunner i get my rig's wheel balance checked at DT discount tire every rotation... new tires going on there tomorrow in fact... is this a shop that would skimpy on the weights in your opinion or experience
@Mike-rk2tj
@Mike-rk2tj 2 года назад
I thought you sold this thing ?
@4rft5
@4rft5 2 года назад
that was an april fools joke
@PhoRunner
@PhoRunner 2 года назад
Watch that vid til the end lolll
@Mike-rk2tj
@Mike-rk2tj 2 года назад
@@PhoRunner I feel like an idiot, lol. I enjoy your videos so I’m glad you didn’t actually sell it.
@PhoRunner
@PhoRunner 2 года назад
Lol sorry. I thought I’d play a prank on my fans. Lots of folks unsubscribed lol
@johnvaillancourt5402
@johnvaillancourt5402 Год назад
Not a critical component until you are driving down the road at 60 MPH and the wheel falls off then it's a critical matter
@PhoRunner
@PhoRunner Год назад
Lol
Далее
Upper Ball Joint Replacement
48:11
Просмотров 211 тыс.
БИМ БАМ БУМ💥
00:14
Просмотров 3,6 млн
would you eat this? #shorts
00:23
Просмотров 1,5 млн
How My Toyota Balljoint Failure Almost Killed Me ...
19:13
Fixing The Most Common 3.4L Toyota Problem!!
16:31
Просмотров 91 тыс.
How to Replace Radiator 1996-2002 Toyota 4Runner
13:12
The WORST Problem with Toyota’s - Lower Ball Joints
0:53
Снова заколхозил BMW? 😰
0:30
Просмотров 461 тыс.