500cc Duromax First Ride

Подписаться 426 тыс.

Просмотров 19 тыс.

50% 1

Today I install the swing arm that we modified on the last video onto the chassis. I have to cut out some of the frame to clear this new setup and build a custom stainless exhausts.
Metal Supermarkets - bit.ly/3tMMPdv
Parts Used On This Build
Muffler - bit.ly/3ODD48g
90 Degree Stainless Exhaust Bends - bit.ly/3OJ7hCG
500cc Engine - amzn.to/3rJhB66
780 CVT Drive Pulley - amzn.to/499xPGP
780 CVT Driven Pulley -
Reverse Gearbox - amzn.to/3y2MNNw
Engine Plate - amzn.to/3SdXhoA
Axle Bearings - amzn.to/3Q7UF8U
#50 Chain - amzn.to/3FuJyC5
#50 Idle Sprocket - amzn.to/45K6Zlm
3/4" Heim Joint - amzn.to/3eCFxN8
1/2" Heim Joint - amzn.to/3bBAvhW
Merch & Events - bit.ly/33YbmtO
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Machinery- Siegmund Welding Table - bit.ly/36PHm6G
Nargesa CC60 Bender - bit.ly/2xWDVxj
Prime Weld Tig 225x - amzn.to/3L4U3MG
Prime Weld MIG180- amzn.to/3KVUPvn
Amsoil Affiliate - bit.ly/3TWtrmM
Benchmark Abrasives (cut-off wheels, flap discs..) bit.ly/2SENg4f save 10% REDBEARD10
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
TikTok - redbeardsgarage0
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage

Опубликовано:

4 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 95

@NCMATT 11 месяцев назад

I laughed so hard when you hit your head on the windshield wiper.

@RedBeardsGarage 11 месяцев назад

That dang wiper lol.

@bryduhbikeguy 11 месяцев назад

Dain-bramage bumper..(I thunk I seen 1 before,but I'm not wronger than rightish.What was the question?).

@donduck6195 11 месяцев назад

Lol. I rewatched it like...5 times. I've done the same thing in my Honda Odyssey.

@pogonick55 11 месяцев назад

BRO the welds, the camera work, the comedy, the engineering, the shop, the dedication its all just chefs kiss man 🤌🙌

@chadmills5400 11 месяцев назад

Metal Supermarkets is the first sponsor from anyone that I would actually use.

@jimfarris9671 11 месяцев назад

Okay thank you for responding. I do appreciate it.

@BunkerBlog 11 месяцев назад

Looking forward to dyno footage on these big blocks!

@Ratkill9000 11 месяцев назад

He has to reinforce the dyno to take the power of the big blocks first. They'll flex it too much and he doesn't want it to break.

@BunkerBlog 11 месяцев назад

@Ratkill9000 He say that? I wouldn't be surprised. Big blocks with just simple bolt-ons produce power similar to highly built 212s. But torque is the main difference. No small block can touch the torque of a big block.

@Ratkill9000 11 месяцев назад

@@BunkerBlogI think he mentioned it in the 500cc video when he got the engine not that long ago. It was either that one or something. But he did say that he needs to modify the dyno for these larger engines because they could tweak the frame of the dyno and I think a few other things could end up getting messed up.

@dodgeme1986truck 11 месяцев назад

I think he needs to do an intake length dyno comparison short, medium, long, and xl tube intake dyno comparison... Maybe a short medium long tube header comparison of different tube diameters... What is known about intake length is longer intake peak torque hits at lower rpm but with much higher torque output. And header lengths act similar but that can be tested on both small and big blocks with different build lvls

@donduck6195 11 месяцев назад

I'm dying to see a comparison between all the big blocks to see what they ACTUALLY make. The gx390 vs hf420 vs dmax440 vs hf459 vs dmax500. I use a gx390 for my mud motor but if there is actually a 8.3hp difference for the dmax500 (11.7 vs 20) then I will buy one asap.

@montiel33b 11 месяцев назад

Pure inspiration 🙏🏼God Bless y’all

@evanwilliford2606 11 месяцев назад

Kinda sounds like an old TT500 in a way. Pretty cool

@JDzgarage311 11 месяцев назад

Awesome buggy! The duromax big block sounds very deep. Enjoy seeing your projects and videos on engines. Interested to see it’s performance with governor removed and different gear ratio. The first video I saw of yours was a governor delete years back…

@NCMATT 11 месяцев назад

Hell yeah Metal Supermarket

@shrugger1 11 месяцев назад

From what I hear the reverse gearbox does eat up some horsepower going to the wheels.

@psavar97 11 месяцев назад

If you mean the Kj racing video that he said that, in his next video he chained gearing and stuff and changed his mind about that. I've been using one with a yx140 engine and so far seems really good. Shifts well and doesn't tax a ton of power that I've noticed. Definitely worth it for reverse.

@chadmills5400 11 месяцев назад

I would love to see you squeeze one of those 500cc into a Mega Moto 212 frame!

@Ratkill9000 11 месяцев назад

Now you just need to do a side by side comparison between this and the Vegas 625cc and tell us which one in your opinion is much better suited for shenanigans.

@RedBeardsGarage 11 месяцев назад

625cc make more power for sure.

@thedude8046 11 месяцев назад

Zz top came flying by! Hahaha!!!😂😂😂

@chadmills5400 11 месяцев назад

Love to see a skid tire or two mounted to the front.

@2400Baud 11 месяцев назад

Reminds me of the engine on my Royal Enfield. Twins sound great, but I have a soft spot for big displacement thumpers.

@chadmills5400 11 месяцев назад

That pan hard bar will make you steer right and roll over if you get any air. Instead, you could mount two shocks diagonally crossing over each other. That is why the rear end is Darty. It wants to fight your steering every time the suspension moves.

@davidowen888 11 месяцев назад

Oh Boy a pre gravy bone machine😳 Glad your noggins ok

@chadmills5400 11 месяцев назад

Beautiful welding there, I would pay for that!

@SDS-1 11 месяцев назад

More kitty Stovepipe content please. Although I would have called her, DuraMeow. ❤❤

@Ratkill9000 11 месяцев назад

Stovepipe, if you know you know!

@royleemelendez7430 10 месяцев назад

I would like to see you’re upgraded billet parts video

@princessadventures1285 11 месяцев назад

Think im going to get my kart out this wknd. Its a fun kart and i built the rear end like lil red. Im 55 lol

@SuperHamsterGaming 11 месяцев назад

I need that setup on my golf cart

@chadmills5400 10 месяцев назад

Make your carts rear end free without the side lean. All you must do is cut that rear pan hard/torque bar in the middle and weld a bolt with a fulcrum plate that is 1/3 the length of each pan hard/torque bar. Weld an eyelet on each cut pan hard/torque bar and bolt to fulcrum plate. Make sure bolt for fulcrum plate is welded with a nut and bracket to either upper or lower frame. Zigzag pan hard/torque bar. Looks like the capital letter "N" sideways with the fulcrum plate being the middle slant of the "N" and the fulcrum bolt in the middle.

@1979augistine 11 месяцев назад

Haha went all gravedigger red anderson on that buggy hahaha

@hananyahdavis3715 11 месяцев назад

Nice

@brianlackie5093 8 месяцев назад

Using capable and obviously have some engineering experience Selena make them look more suspension travel and refine the suspension geometry a little bit bit and make it more of road capable. There's a lot of side by sides like what you're going for but I've already been refined and tuned and they're really good machines so what are you doing? They're also extremely expensive I'm just trying to wrap my head around your builds and where you're going with it

@chadmills5400 11 месяцев назад

Looks like one cylinder from a 240CI V8 engine or a 160CI 6 cylinder engine. I'm waiting for the 428CI version, when is the 876.6cc one cylinder coming out?

@vonanglin7468 11 месяцев назад

I want to fly my paramotor out of your field! But I will wear a helmet! 😆

@igokarts4510 11 месяцев назад

Why don't witches wear underwear? So they grip the broom better when they fly. Happy Halloween everyone!

@seansysig 11 месяцев назад

Lonnie what you been drinking? Windshield wiper where’s the windshield? RBG I thought you were going to eject yourself.

@RedBeardsGarage 11 месяцев назад

I never expected for that hit to be that hard lol. Still feeling it.

@official_db0849 9 месяцев назад

what the link for the 780 CVT Driven Pulley?

@jonlambshead5115 11 месяцев назад

@RBG Good Video, However You Need To Fix Some Of The Machines & Sell Some Junk

@anthonyrollins9825 11 месяцев назад

but good sir ....YOUR SO STRONG ! ........ why did your beefiness need the use of a cherry picker?

@RedBeardsGarage 11 месяцев назад

I just didn’t want to show off lol.

@firstrespondergarage 11 месяцев назад

🍿

@cedhome7945 11 месяцев назад

Any chance of a road to power on this engine?

@Lws778 19 дней назад

Hey I'm wanting to put that 500 in a golf cart the golf cart is electric so I need a gearbox. Do you have a recommendation and have you made a video with this conversation

@NCMATT 11 месяцев назад

Yo I think it's not all the way going in to reverse . at end it was

@NCMATT 11 месяцев назад

At end it was.

@RedBeardsGarage 11 месяцев назад

It’s like it had to get broke in. It shifts perfect now.

@Nitro91 5 месяцев назад

500cc duromax or 670cc predator which works better or easier to fit on gokarf

@igokarts4510 11 месяцев назад

I'm still curious if that reverse gear box can be converted to a Hi -N-Lo box?

@RedBeardsGarage 11 месяцев назад

I don't think it could.

@stevemanske4321 11 месяцев назад

Helmet and eye protection….?

@chadmills5400 11 месяцев назад

slam a 440 flywheel on there and get on with the governor delete. I woulda just ran it without the flywheel. It wont go above 5,400 i bet.

@ToddS662 11 месяцев назад

Put one in a mini bike.

@Rad.Dad.Customs 11 месяцев назад

I believe you had it if you would just FULL SEND it 😂

@laurelfisher2689 5 месяцев назад

What exhaust and carb works on the 500cc duromax? And what cam?

@bradleyewortman1168 11 месяцев назад

Seat belts and helmet

@chadmills5400 11 месяцев назад

Let me see a proper landing. You gotta roll into the jump then floor it real quick and land on all 4 tires.

@jimfarris9671 11 месяцев назад

How many horsepower is 500 CC?

@Minibikes_of_Augusta 11 месяцев назад

20hp .

@greggory448 11 месяцев назад

Stretch that frame.😅

@bryduhbikeguy 11 месяцев назад

I think a Foot,or half again,at the front,will get the Geometry they need for safe trail riding too.

@kainthepain7126 11 месяцев назад

on the rear chassic do you worry about balance left right and forward

@jaypach5681 10 месяцев назад

Where do you get the inboard spring from

@clyde8182 6 месяцев назад

What kind of air filter you put of that?

@bryduhbikeguy 11 месяцев назад

Helmets keep the Dain-bramage to the lesser than the unwanter..I forget...I didn't helmet my thunker and it thinked a tree...?Aside from that..What?...I thought my phone rang...It's my ears..Oh..your right front suspension bent back .Your toy sounded Tough,so put in the Safety belt and Ride like it's meant to.

@stevereese6488 11 месяцев назад

It doesn’t rev up very high sounds like

@RedBeardsGarage 11 месяцев назад

Its still governed

@carterwallenburg2869 11 месяцев назад

Just bought a manco 405-10 with a gx160 Honda motor. What are somethings you would do to make this thing run better? Thanks!

@Jesse_Jessie_James 11 месяцев назад

Wear your racing harness.

@RedBeardsGarage 11 месяцев назад

I know. I feel like a moron not wearing it lol.

@Jesse_Jessie_James 11 месяцев назад

@@RedBeardsGarage and a helmet. Cause u can never tell what happens if u do stuff like that. My kid's always wear helmets including me and my husband Jesse.

@shinigami117s8 9 месяцев назад

Comet 40 series work?

@stvhuston1 11 месяцев назад

I didn’t catch what torque converter set up you were using? I have a duromax 420 with a 780 clutch on a kart and can’t get it to stop creeping

@Ratkill9000 11 месяцев назад

Chinese 780 clone

@allighabell3138 11 месяцев назад

Jesus says wear a helmet

@RedBeardsGarage 11 месяцев назад

I will from now on. Maybe even knee pads lol.

@youreaknob 11 месяцев назад

If only it was fitted with a seatbelt. Oh hang on.

@matthewlee2686 11 месяцев назад

I thought he was from the south

@chadmills5400 11 месяцев назад

Governor delete, let 'er rip Tator chip.

@randallbaker9055 11 месяцев назад

That looked painful

@RedBeardsGarage 11 месяцев назад

It hurt like a son of a gun

@josephhamilton5185 11 месяцев назад

Please wear a helmet y’all 💀

@somenygaard 11 месяцев назад

In a car?

@ianellithorpe5918 11 месяцев назад

God bless RBG

@robertshawn1955 11 месяцев назад

too many adverts

@theoldfartschannel3692 11 месяцев назад

I'm hoping ARC Racing or EC Carburetors decides to make a billet rod and flywheel to fit that 500cc. Also hoping someone offers welded and reground cams.