5G Pipe MIG Welding | Welding Tips & Tricks  

Please don't ever stop making videos. They are all such high quality. We all appreciate what you do!

You have the best, most clear and vivid arc video I have seen! Thank you for all you teach us!

i learned to tig in colledge because there were no mig stations left i sat on your channel for weeks trying to pick up what to do..... that was 2011 honestly i picked up more from your channel than i ever did from any instructor i still hobby tig and to this day still dont know how to mig or stick thank you for you continuing content

I love it: “One test is worth a hundred opinions.”

I know this might seem like an easy job because you make it look that way but it is NOT. PLEASE! Keep these awesome videos coming for all us people this stuff is magic! Awesome videos!

Dear sir: excuse my bad english i am from argentina and i only speak spanish but i want to say you thank you very much...i cannot understand all what you say but the videos are very clear and help me a lot. Thank you again

Drinking my coffee preparing to go weld an 8’ section on 4” pipe onto the end of my flag pole and this pops up. Solid tips Jody, I’ll try to apply them here in a bit!

I miss welding, this is the only test i never get, i was practicing and im pretty sure i will pass just like, all the other, all the way to 4g, ur videos helped me pass all my certifications, thanks master for dhearing ur knoldge, for all those who still on school dont waste time bur rods so u dont regret it.

well jody i finally got my forever welder now. i had recently purchased a cheeper unit and was really digging it. Aguy i had bought a table from a few months back had reached out to me about selling his machine. it is a miller syncrowave 210 it only had 2hr and 12mins on the timer. i could not pass it up. i absolutely love it

I ain’t got much time to be in the shop at the moment because I have to prepare for my pipe fitter test so watching your videos definitely helps to as always learn a lot of new things and also bridge the time until I can get back to welding. Keep up the good work sir!

Сам работаю сварщиком и тем не менее всегда с удовольствием смотрю видео с премудростями в моей профессии!!

a timely video for me, I'm currently welding out a heap of fabricated lobsterback 36 inch diameter schedule 10 elbows for a water pipeline with MIG, but we're welding the root from the inside downhill, back grinding and then running the fill and cap uphill on the outside of the pipe, a few of the guys are running a standard CV MIG in short circuit, one of the guy's is running a Lincoln STT, and I'm running a Fronius TPS2700 on pulse. I'd love to see a video with you running pulse MIG out of position, I tried the three setups, and found I was able to run fairly hot and fast uphill with the Fronius on pulse, 480 IPM and 25 volts for the downhill root from the inside of the pipe, 440 IPM and 24 volts from 6-9 o'clock, and 600 IPM and 27 volts from 9-12 o'clock doing the fill and cap in one pass, I'm finding if a do a back and forward whip coming up from 6-9, coming forward and then back it fill in and wet it out, and from 9-12 just push it uphill a bit as if its running a flat bead it come out with a very nice profile and looks like it was welded flat.

Interesting, on my place we just blast a root in with positioner 1.5 mm landing 3 tacs 120 degrees to hold it then do a Christmas tree kinda pattern for cap basically move across right to left move up to the middle of you root small triangle move back to the right make sure you hold on the edge as not to undercut then go across to the left half thickness over your first bead as it rolls.

This was like my first welding job outta high school. 2 -- 4 inch pipe for natural gas meters but almost verything was done on a turn table.

Great teaching, very clear and easy to follow, i've bee welding for morre than 30 years, but never learn the profetional one, with your tutorial, i will start all over again, never late to learn! God bless you.

He really flexed by showing us his perfect results at the end ! I’m 19 and taking welding course. Currently intermediate stick rn but later will be taking flux, tig and mig. I want my welds to look like this! Any advice??

Love your videos I watch almost everyone. Stay healthy and all the best for you and your family.

One test is worth 100 opinions. Wise words!

Jody, that was an awesome video! I really enjoy when you do mig videos because thats the kind of welding I do right now. Thank you for taking the time to make a great video about mig welding.

Gostei vou tentar essa tecnica

Muy buena tecnica y excelente acabado compañero,mi pregunta es porque se detuvo en plena subida eso esta permitido en las normas de tuberia api y asme?

I am practicing to take a UA 85 test this info was very helpful, thanks

Recently purchased an Everlast MTS 275, I purchased your Furick alley #5 aluminum kit. Looking forward to using that for some jobs at home. Love your channel, love your store 💪🏼

muchas felicitaciones maestro muchas gracias por sus buenas enseñansas le agradezco de todo corazon muchas graciaz muchos saludos desde Italia ciao

Love the videos Jody, also the Tig finger is one of the best things I have brought for welding. Greetings from Australia

Congratulations for your good work and all the tips and the help that you give...i would like to ask a favour...can you explain the diagram on the door of the welders...i cant understand it..i work the most times with e7018....but when its time to weld with mig it takes me a lot of time to set up...i would prefer to know approximately the settings so i can set up again the welder for my preferences.

QUESTION, I was watching a video of yours is there a way to make a pedal to cut power but not loose argon coverage at end of weld. In my head I'm thinking ING yes simple, guess I want someone else to try first...

I Love: 08:40. Thanks Jody! God bless you.

Mi pregunta es con que codigo trabajan que el pase de raiz lo hacen en forma descendente, sera Api ,asme?? Y luego lel rell no y el cordon de acabado ascendente.... Aqui en latino América cuando es progresion ascendente todo es asi desde raiz jasta acabado y lo mismo va para descndente.... Por eso mi pregunta.

Realmente es una excelente muestra de como realizar una buena prueba en tubería Saludos desde Colombia 🇨🇴 mi amigo sigo tu canal aunque no hablo ingles, pero tú contenido es muy instructivo.

Really enjoy watching your videos

Awesome Jody! Thank you! Be blessed!!!!

That optrel helmet makes a huge difference on visibility 👍

This is the level of skill i strive to achieve

Welding master! Finally! 😍😍😍

GUAO GUAO GUAO MUCHAS FELICITAZIONES POR ESTE MUY LINDO Y MUY ILUSTRATIVO VIDEO QUE NOS DA MUCHIMA INFORMACION A ESTAS MUY LINDA SOLDADURA Y MUY BUENOS RESULTADOS DE PENETRACION QUE SON MUY FANTASTICAS A LAS PRUEBAS YO LE AGRADEZCO MUCHO POR DEDICAR PARTE DE SU PRECIOSO TIEMPO EN AYUDAR A LAS PERSONAS COM POCA ESPERIENCIA DE LA CUAL ESTOY MUY CONTENTO EN AVER PARTICIPADO A ESTE IMPORTANTE VIDEO QUE ME A DADO UNA MUY GRANDE LECCION Y E INFORMACION MUCHAS GRACIAS PROFESOR EN SU OFICIO YO LE DOY MUCHOS RESPETO POR SU GRANDE CAPAQCIDAD DE SOLDADOR DIOS SE LO PAGUE GRAZIE MILLE

Love you videos. I’m a beginner trying to learn, and this is definitely helpful....👍🏾

You da man Jody.

Hi jody. Quick question. Is it posible to weld 5 thou stainless steel sheet / shim. It to a belt ?

Thank you for your video and your time and advice 👍😎 I'm learning with your videos. 👍👍👍👍👍🍺😎

You are good instructor I love you

Wow i hope someday i can do that kind of welding.. im just more on fabrication.. and lack of full welding experience

Good evening. Hello from Russia! Thank you for your video. Your welding channel is one of the best on youtube. Tell me about the setting, amps are of interest and not the feed rate.

That camera is awesome ! It projects on my screen clearly. No joke

Brill work always fancied a welder but still unsure whether tig or mig is best option tig sounds complicated with the air etc and other components

Hello sir! I watched all your videos . I really appreciate what you are doing for us. This ESAB welder is very nice and i was wandering how this is comparing with FORNIUS TRANSTEEL 2200. Did you had the chance to use that machine? I heard only good things about is . I wish you all the best!!

Nice welding nice wire speed nice vod

Njenengan pancen pinter civ

love all your vids, awesome!!!!!

Excellent..... 👍

Never wire welded much and I have a make or break test tomorrow.

nice video my friend i am welder i live in chile thank you

That esab seems to be a great smooth machine

We learn every day...keep it up

Sou do Brazil sou apaixonado por Solda principalmente Mig

fine seam welds 👍

Im right paw ....but my right eye is so weak...not like the left one....so i jave problem in bottom...i cant see with the right eye....any helps here ?

Very good 👍

Another masterpiece. Thanks Jody

Hey man ,Good job !!! 💪😎

Hello, a question, when should we NOT be on the "leading edge of the puddle" when MIG welding

Thank you for your videos.

👍👍 good video Jody. Thanks for sharing with us, Fred.

A quick question, please. I went through your MIG welding series and have tried many of the techniques and practice items. My question concerns welding thin wall 4130 chrome-moly tubing, such as that used in homebuilt aircraft fuselages and empennage structures. Historically these were gas welded (oxyacetylene) or TIG. The tubing wall thicknesses are (generally 0.028/0.035/0.049/0.058.. I'd like to MIG weld the structures if possible (some manufactures use a MIG process). Using your charts it appears for the 0.035 wall thickness the settings would be 35 amps and 70 ips... does that sound about right? Any recommendations or comments?Thanks!

On my Millermatic 210 the wire speed is just a setting, not and actual IPM. Is there a way to calculate actual wire speed? Same for voltage. How many volts is the #4 setting?

Отличная работа

Good work, man...👍💪🤗 The welder No.1 !!!!!

Thanks for the information

Uffff, excelent Jody Wordless

Gostaria muito que os videos fossem traduzidos para portugues

Awesome video Jody you the man. Stay safe 👊🏻🍻

I have an old craftsman arc welder 35-125 ac amp 220v and an airco wire feeder , how can i conect the wire feeder to my arc welder ?

Jody, You have awesome videos. I have learned so much from you. Keep up the great work. There is one thing I have not hit right on the nail and that is the black soot when the arc starts when using my miller 210 welder. I don't see any soot or black gas marks on your videos. Any advice?

What Maching Are You Running? Also, Do You Use Chill/Backing Rings..?

Best welder sir super nice

Eres el mejor, muy tecnico.

GREAT CONTENT.

Exelente gracias saludos

the beautiful welding flame

Where can I find the pad you are wearing on your glove? I’ve looked on the website and can’t find. Thanks for all the advice! I’ve learned a lot! It’s really helped me become a much better welder.

So good ! Ordered a bunch of stuff from weldmonger, but amazon is on hold right now

Inspiring, i have to try 😂

This is a masterpiece Sensei

Great job sir

thanks for the excellent video your explanation God bless you greatly!

Hey Jodie. Hope all is going good thank you for the videos. So you mentioned that you were dialing in your settings so that you didn’t have any spatter. Is that the best practice for welding. Dialing in your settings so that you have no spatter. I have it all the time. And where can I get the etching solution. Do you sell it at your store? Thanks again

Is it correct to weld a process pipe or a pressure vessel in an upward direction instead of a rising one?

You should have a weld cap on Jody, gotta protect that hair...lol

Te sigo hace años y he aprendido contigo, saludos

Great video. Very helpful.

Hey Jody. Great vid as always. Could you also do a mig vid in the 6g position with 6" sch80 pipe, mild/mild or better mild/stainless. I was asked to do a procedure qualifcation test for my company but i'm struggling on this one. It's always bulky and just doesn't look good. Greetings from Germany

Muito Bom parabéns 👏👏👏👏👏 obrigado pela aula

Bravo Maestro super👍

Were you using the heavier duty tips and nozzle for this test? Just looked a little bigger than the standard nozzle that comes with ESAB 205

very good job 👌

Exelen wuelders My friend greath Man

Jody why isn't pulse mig used in pipe welding?

Very good, MANAUS AM BRASIL.

Just wondering what diameter wire are you using .8 or 1mm

I like how it's so to the point. Here's the problem... here's the solution