No video :(

Simple MIG Welding Technique - Flat, Horizontal, Vertical & Overhead | Welding Tips & Tricks

Подписаться 1,1 млн

Просмотров 1,1 млн

50% 1

In this video, I welded four T-joints - flat, horizontal, vertical, and overhead, all using this one simple technique. I hope it helps! Subscribe to my channel for more weekly videos.
www.youtube.co...
This might not be the absolute best MIG welding technique for each different joint or position, but for T-joint fillet welds, it works pretty well.
Visit my store at weldmongerstor... for TIG Fingers, DVDs, and other quality welding tools.
Follow Welding Tips & Tricks on social media to see what I’m up to:
Instagram: / weldmonger
Facebook: / weldingtipsandtricks
Join the discussion with thousands of welders at the Welding Tips & Tricks forum
forum.weldingti...

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 312

@bret_Lambky 4 года назад

I like the yellow path visualization before you actually show the welding path. For a rookie like me, it’s a great visual aid. 👍🏼👍🏼

@Tetracarbon 4 года назад

Bret Lambky agreed. Somethings are verbally explained in videos but the yellow drawing makes the idea very clear.

@kuzmaibarra8169 3 года назад

@@Tetracarbon ¹

@irishmaydelacerna6319 3 года назад

@@Tetracarbon 21110

@dolphincliffs8864 2 года назад

51 year old Navy vet here,had a garage door business for 15 years,amateur welder for 20 years,going to welding school Jan 22. Good content ,good instruction. Thanks !!

@FIGGY65 2 года назад

Good for you DC! It’s never too late to start on a new path!

@LuisMiguelRomo 10 месяцев назад

Respect

@pauladams3789 3 года назад

Being a self taught welder, I really learn a lot from you. Much appreciate.

@sanjitdas149 3 года назад

ব

@sanjitdas149 3 года назад

বব

@sanjitdas149 3 года назад

বব

@sanjitdas149 3 года назад

ব

@sanjitdas149 3 года назад

ূ

@j.kino.nutrition 2 года назад

Was getting frustrated today and then i watched your video and it completely changed the way i do mig. Thank you so much

@hossennamooya3938 9 месяцев назад

Thanks bro. I'm 72. Amateur welder using arc welding. Just purchased a mig. Your vid is excellent. Thanks again.

@danilojones7193 4 года назад

I have been watching this channel for years, and I must say he keeps it simple, and he just keeps get better and better, iron sharpens iron.💯👍🏾

@ttman6197 3 года назад

My school sucks my teachers never went to detail about the distances and the pattern it needs I learn by asking everyone that’s more advance then me taught me a lil a about welding I felt like I’ve been doing all of this on my own but with you I feel more complete with the lessons and ways to weld right

@BigSarnt Месяц назад

Mr Jody, I would like to thank you personally for your video and experience. I am being trained (so-called train, we're just given scrap and told to weld - but we are on the clock so that's cool) on welding trailers. I wasn't getting the best consistency on my welds so I looked at your videos. They specifically said to push and whip with the wire, but I decided to use your method and pull instead. Instant change. Better control, better consistency, and I know the weld penetrated extremely well. Thanks a lot.

@larrykent196 14 дней назад

Just a rookie here, sure like what I see. Practice is the key and I like you style of explaining the process with importance of good penetration over looks

@MrNKenn 2 года назад

Thank you for making this! I attended welding school during high school, welded a few year and learned CNC (Mill). This brought EVERYTHING back! Thank you for helping people out here!

@jamariuswhitson9752 Год назад

Thank you man I went to a free program for my weld certificate and they treated me with no care and little help so when I show up to these interviews I’m left in a blind spot about a lot of stuff but your whole page on RU-vid has been saving me

@user-ss4fd2vf9g 11 месяцев назад

Easily the best welding tutorials on the internet. I have learned so much from this channel in just a few months. Thank You.

@APoleYouKnow Год назад

I've studied welding for a few years now but I never considered how much a proper ground matters with MIG welding. I learned something new today.

@Outlawv21992 2 года назад

EASILY the best welding tutorials on the internet... I have learned so much from this channel in just a few months and I'm actually not half bad based on the knowledge I got here! Thanks for making these!!!

@hellersonracingengines5792 4 года назад

I generally use the “v” technique for downhill, great penetration and clean controlled edges. I used to weld 11 gauge downhill mostly 12” at a time non structural so id play with settings and just make it pretty. Roughly 18 volts with a slower feed rate, never disappointed.

@timberslasher4899 4 месяца назад

You are maybe the only professional that I have ever heard say that you get more penetration pulling mig. And I totally agree!!!

@nznative77 3 года назад

New subscriber here... just want to say your content is so refreshing after watching so many ego driven welding instructionals!!! Everything is about function, practicality and efficiency and then you back it all up with science!!!Thanks for sharing your knowledge!!!

@mikesvlogs1683 2 года назад

I m in school honestly I feel like u explain better than the guy up there in school

@karimkhoury8692 2 года назад

the use of your left hand is the best I have ever seen, gives total control.

@MN-co3um 4 года назад

Jody now even my kids know you :)). What they don't know is how I came across you back in 2011 when I was struggling with purging some 16" stainless pipe for Harrods in London. with your tips and tricks I did a good job and bought a nice little car with that money :). Also learned from you how to do a vertical fillet MMa ... I should make in one day a list on how many things I learned from you . Basically that job started me off on deep sea, high pressure projects. So thanks a lot for teaching me how to make loads of money. Keep up the great work you do. God Bless you and your family.

@jrcll7856 4 года назад

i never stop learning watching and listening to your videos

@mikeromophp 4 года назад

Great new content!! Loving the clarity of the video and the screen capture of the electrode path. Thanks Jody!

@LittleStrongBoy 4 года назад

No matter how experienced you are, always to learn more

@bigjohn8549 3 года назад

Hey Jody I bought my first welder about 3 weeks ago and tried to welding in my shop needless to say it didn't go so good but now with all your help I'm much better thanks man

@currymuncher0941 2 года назад

How ya going now ?

@MrFergeson 4 года назад

Thank you for this video. It's really helped me understand how to use a MIG welder.

@waynehandley5703 Год назад

Thank you so much for being slow with your teachings I'm a slow learner and a first time or a welder I appreciate you taking your time and explain things so I can understand that thank you hopefully I'll become an awesome Wilder like you again thank you

@ssamad 9 месяцев назад

Hello from the Tajikistan 🇹🇯🇹🇯🇹🇯🇹🇯🇹🇯

@phillully4472 2 года назад

Thank Jody for the great tips on Mig and Tig welding I have learned a bunch so far.

@Soldaduragal 4 года назад

To me you are the best youtube teacher welder. My welding students are crazy with your videos, even without understanding english, they use the automatic subtitled translator and It help them a lot. Your quality videos are improving since I become your fan long time ago. I think that you could increase your worlwide audience by adding some kind of overlap information in scientific notation(1/8"---3.2mm). The AWS Welding Handbook recomends to use scientific notation as a means of share knowledge arround the world. God job teacher!

@timothysvec8568 4 года назад

Nice. Thank you! You teaching. My Miller 211. Side job's. Cha-ching$$$. I do restaurant stainless repair and non-structural homeowner stuff! But no automobile.

@michaelanderson7182 3 года назад

I liked the fact of all the good information he gave it was clear and to the point as it should be

@michaelanderson7182 3 года назад

People should do the in that on the job as well

@billk5727 4 года назад

Your videos and style of teaching/showing is hard to beat! TakeCare, Bill

@user-ck2xn6ue9c 4 года назад

Hello, I thank you very much for this valuable information in the field of welding and thank you again for drawing the graphic lines that illustrate the way the wire moves. I hope that there will be a translation into Arabic so that I understand what it says and learn from you more experience😘😘😘

@hddm3 4 года назад

Just bought the gloves and magnets. Can’t wait to try them. Thanks Jody for all your videos and knowledge man. Glad I could support you allittle

@MenardChitsamba Месяц назад

Nice job thanks for your advice and teaching you help us to improve in mig

@ariftkglaz7753 4 года назад

I'am construktion febrication worker from Indonesia.,like your welding vidio,thanks for sharing., fery good job.,

@jericopaler1377 4 года назад

Just here to watch this as my stress reliver. End up learning something. 😊

@robertogiustipires7105 4 года назад

I worked in North little rock...a 3 years ago... I Love your equipaments and your technoligy....

@Methodcnn 2 года назад

Thank you for the great videos , great editing and content !

@naimdiego9982 2 года назад

Have a vertical, overhead and flat mig test on Monday. Wish me luck guys

@dhanwatiesukhai2524 4 года назад

Thanks Jodi. Awesome illustration of the technique for the various positions. Thanks for sharing. ( Andrew).

@andrewfordham5883 4 года назад

Gotta say the clarity on your videos has come a long way since I first found you in 2014 Jodie. Really impressed with your instuctional videos and am eagerly awaiting my tig finger in the post. Proud to support your habbit and thanks from UK

@SteadArcFab_Ministries 4 года назад

Thank you Jody! Great video! Be blessed!!!

@gtgodbear6320 4 года назад

I was trained as a repair welder fixing robot errors. I wasn't properly trained or certified. I practiced during break times so it looked like I was a natural when being trained. So they left me to wing it and figure it out on my own. It always passed inspection so I guess I did it right. I had to get a pacemaker so I had to end my welding career. I really wanted to get certified.

@lavellesogucc1 2 года назад

Your welds look amazing!!

@rankamirko2455 4 года назад

Greetings from Serbia!

@jonwoody3572 4 года назад

Jody , by the 2F weld why you go first up forward. (+ 3.04 min ) On the other side of the pond we learn always (I = 30 years ago) first go down forward because you can drag " dirt " under your weld. First down and than up to fill your undercut (banana shape movement ) Same when you weld from left to right you go anti clockwise by circle movement and never clockwise because you can drag " dirt " under your weld (imperfections or silicates ) But like always a good video = Best welding youtube channel

@joeashleydelabuena6196 11 месяцев назад

Sir i relly lovevwatching your vedo ..i learn a lot. Thnks sir

@chrisgreer5181 2 года назад

Thanks for showing how to weld according to the chart. Tough stuff right there. Me and my work partner weld all day every day.... it's hilarious how we had a discussion about tip to nozzle end clearance just the other day, him having his flush like you do and mine being about 3/8 distance like it should be... I'm sure there's no correlation between that and his tip getting trashed every other day while mine stays good for about 2 weeks.

@jeffgrier8488 4 года назад

Thanks Jody, I learn something every time I watch your videos.

@mr.ranyhomemade2466 3 года назад

You are so amazing information and you make me learn from you and I started from empty now my weld look better. Thanks

@tonychapman6334 2 года назад

Great tips (no pun intended), I learned loads. Thanks

@JK-zi1rg 11 месяцев назад

Great content! As a newbie really helping me get better.

@TheDarknessBane 4 года назад

holy video quality batman!

@jarredspillman3059 2 года назад

Love the videos! As well as the podcast! Could you possibly do a video on inner shield 233 wire. A lot of ironworkers struggle getting certified on this wire. And that’s the test that will certify all of our members on all flux core wire. Which is a the majority of all structural welds. I know hundreds of people I’ve met out in the field that watch your videos. It would help a lot of our members get more information on the wire. And welding with a drag angle on a verticals which is so strange lol. Thanks for the videos! Keep up the good work!

@steverone7623 4 года назад

Jodi looking good bro! I can’t wait for you to get a million subscribers. You helped countless people thank you for all you do, I own a stubby has lense kit, tig finger, tig finger XL , the LeSquare and the strong hand tools mag tab 👍🏼

@DeutzDXFahrerKalli 4 года назад

whenever it comes to welding, especially mig, my first thought is: what would jody do?

@DeutzDXFahrerKalli 4 года назад

@19brownboy81 👍😉

@geraldhoffman2606 4 года назад

John-Galt that’s the most reasonable thing to do.

@nicolasmedellin5904 4 года назад

My brother inlaw is a certifide welder and he won`t show me jack ! I know a little from my job, thank you alot sir.

@ManCrafting 4 года назад

Love the video on this. The close up of the puddle and the graphic showing the pattern. Makes it very clear what is happening. You going to WBC this year?

@weldingtipsandtricks 4 года назад

hey Chad, I might be at WBC...gotta play it by ear

@ManCrafting 4 года назад

weldingtipsandtricks drinks are on me. 🍷

@milovelazquez2117 4 года назад

weldingtipsandtricks hi wanted to ask for some tips to keep in mind when welding uphill with 6010 and downhill

@weldtechqc1486 2 года назад

Excellent Video on MIG/MAG Welding. Good Presentations. Keep up the good work.

@CRebeliron 4 года назад

Great video, can't wait to try it out. Good looking shirt bud, you look ripped from hitting the gym!

@elpismi5811 2 года назад

Welding is how this Dad is gonna male the donuts. Dome a lot of lines of work, and welding is a proper trade.

@mrbigg7255 4 года назад

At about the six minute mark when you changed the ground, you could really hear the machine just smooth out and sound great. I took your advice from one of your other videos and bought a one inch wide piece of copper braid. 👍

@steverone7623 4 года назад

mrbigg7255 I sacrificed a small piece of an old lead it works great

@o.daniela.ocegueda1049 Год назад

Se puede realizar un cordón continuo y sin costuras con soldadora mig sin gas utilizando flux core. Gracias maestro, saludos.

@aseanteknik466 2 года назад

Waw simple technique,,,i want try this tachnique,, Tq sir

@duraistalin2889 3 года назад

Super spl Thank you use full video..I am waiting welding job vacancies your favourite fans sir

@josephmagedanz4070 4 года назад

Thanks for the video and sharing your experience. That's how we new people learn... I'm just a hobby welder, so I already have bought what I need from your online store. I will try to buy more in the future. Thanks again.

@motoz3939 4 года назад

Man I remember when your hair was black and mine was thicker. Thanks for all the time you put in.

@schmidtchristian1401 4 года назад

Germany 🇩🇪 says Thank You 👍👍👍🇺🇸

@miradavid6222 Год назад

I really learn a lot from you sir im from Philliphines hope i got those black gloves someday 😁

@hirogemworkshop7008 Год назад

Thank you welder

@jimburnsjr. 4 года назад

Fantastic as always... great camera

@JamesJones-nu9kv 4 года назад

Awesome welding videos, this has helped me in my welding career many times that you for the great videos

@LoanWo1f Год назад

You’re sputtering still looks better than my best welds 🤣💪🏻

@genrixnavarskiy482 2 года назад

Отличные специалисты, знают дело! Привет из России)

@MedalWelder 4 года назад

This man is a damn welding genius

@user-fd1wp5tn4p 5 месяцев назад

C'est un profésionnél j'aime les profésionnél dans leur domaine ❤

@gregmeyer9408 4 года назад

Always Golden Advice mate ✌️🤩

@ifell3 4 года назад

Yey thumbs up for a bit of MIG, do like a change from the TIG this and TIG that!! Only because I cant afford a TIG!!!

@ethantroy311 4 года назад

ifell3 you can buy a Klutch st80i tig welder for around $280 at Northern Tool. Plus $250 for argon bottle,$20 regulator (Amazon) and $10 filler wire. The welder comes with tungsten. It welds good to start you out.

@ifell3 4 года назад

@@ethantroy311 They got good duty cycle on them? But my guilty pleasure would be more for aluminium tigging!!

@ethantroy311 4 года назад

ifell3 well the st80i is not AC so your stuck with mild steel and stainless. I can’t recall the duty cycle at the moment but it’s never stopped on me so far. I would also like a tig that could do aluminum as well.

@ifell3 4 года назад

@@ethantroy311 is that thing high frequency start or scratch?

@ethantroy311 4 года назад

ifell3 it’s scratch start.

@TNTheStig 4 года назад

Thanks as always for the great content.

@nativeflight7079 Год назад

Your videos are awesome and super informative

@tlbfarm4473 3 года назад

Love these videos, learn something new every time. Now I'm looking for ~6" of copper braid.

@okcantbelieveit294 4 года назад

One technique all positions. I thought for a split second that I’d stumbled on one of “those “ channels. 😂

@wisnudewa72 2 года назад

Tehnik yg bagus Mantap..

@keithtynan7469 2 года назад

Excellent, as usual.

@lenoxnianzou6354 3 года назад

U are the greatest man

@michaelbanasiak3015 4 года назад

Well done. Always the best videos. Thank you.

@bobd.fletcherjr4912 2 года назад

👍👍👍👍 I love all your videos they're very interesting

@jacktrooper8845 2 года назад

Amazing teachings!

@boneal4942 4 года назад

Always awesome instruction, video quality! 👍 I spy JG mig gun holder👍

@aguilayserpiente 4 года назад

Good instruction. Would you please show the cut and etch?

@lantzvillafuerte1592 11 месяцев назад

Sir can you make a video showing 3f position mig welding that shows a flat welding bead

@florentbiko4515 4 года назад

Très instructif Merci beaucoup Monsieurs

@robertwaltersagbayyumbla7150 4 года назад

muy linda forma de saldare felicitaciones

@user-ct6gg2qg4p 2 года назад

อยากเรียนฝึกเชื่อมบ้างจัง

@Theonebear 4 года назад

Great video and great weld. Very nice. Looks good

@dogwood8031 4 года назад

You sir, are a frickin machine.

@rajeevmathewmathew4335 Год назад

Thanks for the idea to study

@abirmizi9404 11 месяцев назад

i have a question, that some trainers said That When I do welding I go from right side to left side. But except for the vertical, you have done it from left to right. Now which one is correct, sir?