5G Pipe Welding 6010 Root 7018 Fill And Cap | Stick 

ORDER MY FRC SHIRTS HERE!👇🏼 www.theweldlab.com/product-page/bluecollars-frc-welding-shirts

As a retired journeyman pipefitter/welder, I just wanted to let you know you have gained a new subscriber. Your content and instruction is spot on. I just wish that when I was an apprentice and rookie welder there would have been RU-vid videos available with the instruction and content that you provide. Good on you brother for sharing your knowledge and talent. Stay safe and well.

You got a real talent there my friend, Lord I'm gonna be 70 shortly I really miss wilding, I've watched more welding channels but I'd like yours, I like the way you explain it you're cool come And collected, And you got a mellow way with your voice. Good luck my man.

What I like about this guys channel is that his work is straight raw. It’s real work in the field not no puppy shit in a school shop talking work but not actually doing it in the field there’s a mejor difference.

What I love about welding is there is more than one way to do it all! The outcome should always be the same, but the process can be done a number of ways. Welds look awesome🤙🏻

I’m about to take 2 stainless pipe tests and an uphill and downhill test. I haven’t welded in 6 months so this video is a lifesaver. Thanks so much!

That's was amazing thanks bro bring back memories of 3/20 before covid-19 layoffs

That's awesome I like the way you let us all know what we have to see and need to have to on the gap and the finish weld

Great video. Going for my all position stick ticket soon (on plate) I want to move onto pipe after that. Thanks for all the videos!

Thank you im moving on to 5g pipe today, helped alot. Next is tig root.

Good job you did an excellent weld.

Very detailed. Thank you

I’m in school now this video helped so much

Very informative demo !!!

By the way thanks for videos they help alot good looking out need some videos aboutthe lincoln welder settings

Very good tecnik and clever welder

I used to do a horizontal figure eight! Very tight with no crown in the middle,like yours! Try it

Damn man good stuff !! loved how detailed you made every step 💪

Very nice video. Step by step.

Good job man, that cap looks slick

That hot pass looked amazing

appreciate your videos! been out of welding school due to covid smh Can’t wait to get bk under the hood !

that old navy commercial was nice and loud just the way i like it

Good shit bro I’m so happy for you keep up the good work!

Great Video my guy!

Good job man,appreciate your videos

Flawless victory!!!💪

Cool video. I burned a few 7018 today on my gooseneck trailer.

That's bad ass weld

Good Job

You make look easy

Great video.. and great welding

Very nice sir ❤❤❤

What settigs should i use i have a sa 250 diesel and im having trouble with the cap im using 7018 1/8 what gear and amperage i had a lot of metal dropping and could getit to stay steady

How did u open the gap wider when it was closed?

Dope video homie! 💯🙌

That's Nice

BRAVO !!!!!

This is all the welding school I need, just consider me graduated!! Who got work? 🙌🏽

i need to know that file tool you use to clean up the toes on your cap!! great video man

I appreciate the video i always have trouble with the roots im good at my welds but my roots is always my problem. After watching this video im definitely going to implement these methods

Can I use this same method going uphill? Im going to school but we are learning how to run the rods uphill and i'm having a little trouble . Thanks

Do all type welds need that gap or is just for pipe welding?

I'd rather hear the root pass instead of music.

Do your procedures allow for root, hot pass and fill all with 6010?

Good video bro. 🙌

What’s your arc intensity and hot start?

Good welding, what type of electrodes do you use?

Good vid very detailed me and den improved on that root from just that one day you showed us thanks god bless bro

When u do u root do u see the key hole ?

Would it be wise to do two caps? My teacher wants two but I feel more confident with one.

Everything looks bad ass but that cap👌

Hey bro thanks for the video. I have been struggling with 3/32 cap. I am getting droopy finish and if I speed up i get undercut. Going to try your technique.

Nice work 👌👌👌👌

Why did you run the 7018 uphill? I’m a beginner so I just wanna know why🤷🏻‍♂️

Wait so im allowed to drag the rod on my root pass ?

Slick 👨‍🏭

You should have a put a spacing tool on the tight side then you start welding on the opposite side until the spacer falls out, that is when you stop and switch to the spacer side and weld there. Putting just 2 tacks in is asking for problems.

I started welding in my school because I have a welding class any tips bro

This can be done uphill for 5g aswell right?

Helpful.....Shit bro its AWESOME........Keep it up and thanks for the tips.

Good video brother

Good videos hmie

Tasty beads, Bro

Is that 1st gear at 80?

🔥

Greetings friend, I'd like to ask a question, what polarity do you use for the root pass?. I'd really appreciate your ab comment

Is that quicker than running a couple stringers for your cap?

Very slick , Interesting procedure, I’ve never seen where you can run downhill root/ fill then uphill for cap. It’s always been all down or all up for me. That would be awesome though.

Why did not u clean the paint?

You don't have to grind in between to make your tie- ends?

7018 fill?

Gots a serve on with a slur

very interesting technique. Is there a reason you don't tack at 3 and 9 and also, is there a reason you started the root at the top, rather than uphill from 6 to 12?

When you restarted your cap did you knock off the slag or did you just keep going

Finish pass it's 7018 at 3/32??

Why downhill ?

why so many 6010 passes?

Why did you downhand hot pass

Done #Engineering102 tq to

Красавчик

What about a single bead-figure 8?

3/32" land and the gap?🤔 the same or 1/16" ? Thanks

Are you on social media?

Slick as fuck that cap can't see any restarts !!

Going downhill looks so much easier than uphill

How come you did a 1 bead cap and not 2 beads?

Jenis kawat apa yg dipakai?

Soooo... U did the root pass with 6010, hot pass with 6010, and a fill pass with 6010 and 1 cap with 7018???

why 6010 root? Not 7018 for both?

Piece of cake

thought this was supposed to be 7018 fill and cap? haha, i wish i could fill with 6010 on these joints. 90% of the code up here we gotta 7018 hot pass - cap.

Why didn't you opt for a 5/32 hot pass and fill it at the same time? Honestly I clocked on this expecting all uphill lol

forget the stick get a miller suitcase with a trailblazer or the 5 grand gasoline generator/welder bro..

it's weird seeing downhill welding my school didn't allow that. I wonder how many employers allow this.

Union boy

wait a minute this is 6010 fill not 7018!

No es aceptable trabajar esa tubo sin antes haber retirado la pintura por lo menos media pulgada hacía cada lado

Jus Alright, tie in at 12:00 o'clock position was not Good

Hot pass isnt a fill pass