6.5 PRC TEST (Accurate Magpro powder) 

I suggest checking the muzzle brake for proper clearance of the bullet. It should be 20 thousandths oversize if correct. Some muzzle brakes came out of bergara lately incorrectly drilled.

H4831sc has fared well for multiple 6.5 prc’s couple of us have worked on. Low es/sd and .25 inch groups.

Looks like good potential. H1000 is a really good magnum powder. I have had mixed results with it in my 7mm mags. It seems to like heavier bullets for me. 160s the best. It can heat up a barrel about as fast as any powder I have used. 5 shots max for me before groups start stringing.

That last batch really dialed it in. Great load!

I have some loads worked up with magpro and the 153 A-Tips. I generally use N565 for my 6.5PRC but i have 8 pounds of MAGPRO and want to give it a go. I load my brothers 270 wsm with and it loves it.

I get .5 groups with magpro..id try lower charge and dont waste powder with .1 gr charges

6.5 prc 143 eldx reloader 26

This video was much better than one I watched where you were going to settle for 1.5" 3 shot groups. Best to stick with proven powders that the manufacturers suggest. Magpro is one and Reloader 26 is rated pretty good for more velocity. I don't think you are going to do much better than the Magpro group you shot in this video. I think you should try a 5 shot group for verification on that one and if it works load up a box of 50 for satisfaction shooting. I do believe that Berger also makes a Match/Hunting bullet that is it shoots as well as what you shot you could load for hunting.

Would you consider loading Ramshot Magnum with the Hornady 147 ELD-M's? It seems like it could be a good load to me but I haven't had a chance to try it.

How much barrel cooling time do you have between groups

Anyone ever tell you that you sound just like Jack Black?

Velocities seemed strangely erratic. Actually losing velocity as charges increased. Last charge was really good overall.

156berger with reloader 26 Cci br 2 I would like to see this load tested thx

How much barrel cooling time do you have between groups