6 Gang on-off Control Switch Panel kit Automatic Dimmable Universal Slim Touch (Green Backlight)

Подписаться 6 тыс.

Просмотров 33 тыс.

50% 1

Key Features:
- Multi-position installation and wide application. with different brackets, it can be installed in any position you like.
- Universal 6 switch panel relay system. power up to 6 lights & accessories from one convenient place.
- Customize your own panel, with 50 universal switch stickers, you can customize your unique personal switch panel according to certain needs.
- All in one design for your ultimate convenience. This kit has everything you need for installation and use. No need to buy extra parts.
- Automatic Dimmable Backlight for Driving Safer.
- On the road or other bright places, the switch panel will be brighter, so you can see it clearly.
- In the tunnel or other dark places, the switch panel will be dim, reduce the impact on the driver's vision
* Link to www.auxbeam.com/qp006238
* Auxbeam Lighting: www.auxbeam.com
SUBSCRIBE and FOLLOW!!!
Facebook ► / auxbeam
Instagram ► / auxbeam_lighting
Twitter ► / auxbeam

Авто/Мото

Опубликовано:

23 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 35

@pk9394racing 2 года назад

how to wire backlite lights with 3 wires?

@kendallengman2249 6 месяцев назад

So if I have a light that is capable of both white and amber I will use a yellow, red and black wiring harness to connect the yellow (amber) to one switch and red (regular white ) to another switch and the remaining black (ground or negative) to a frame bolt?

@_mubaris_1725 3 года назад

👍👍👍

@SharpShooter9867 3 года назад

Do you guys have a switching unit that can handle higher amperage on all of the channels, for example such as writing multiple lights to the same switch? Also, if I wanted to w ire the switch panel for constant power, does the power switch turn the panel off and eliminate the draw of the controller for the battery system? If it doesn’t, how much current does the unit draw connected to constant power, with no accessories powered on and the panel power button set to off? Thanks!

@islandertimeau 3 года назад

Are the Relays Interchangeable? And also instead of wiring it for ACC can it be constant power?

@officialWWM 2 года назад

I wired mine to constant power but the switch panel light is on the whole time, so it will put some drain on your battery. I have a second battery so wasn’t too concerned about that.

@hikesbikesbrews 3 года назад

Does this kit come with the add a fuse? It does not show that on Amazon

@TeeLBCify 5 месяцев назад

It does

@MATSHEINSTEDT 2 года назад

Is there a momentary switch on this that can be used for a starter?

@MikeMesserHouston Год назад

This model does not include any momentary switch. I'd hoped for that option, but it's not there.

@hiroshimatsudaira2512 Месяц назад

マイナスの配線はしなくていいんですか？

@halfassed0047 3 года назад

So these are all on/off switches no momentary switches for like a horn?

@angeljcastro3903 2 года назад

Best thing you can do cuz im doing the same thing probably is just hook one aux up as an on/off switch for your horns. On for other horns and off for stock one

@MikeMesserHouston Год назад

Correct - there is no momentary-contact functionality offered in this model.

@Mindgamescc Год назад

will this trigger the strobe options of the 6 mode lights?

@Auxbeam Год назад

No you'll need to switch bewteen its model through the original switch

@91cat 3 года назад

Is it possible to chance fuses to higher ones without damaging something?

@Auxbeam 3 года назад

Hi Did you mean the ACC fuse with higher amp?

@91cat 3 года назад

@@Auxbeam No the fuses in the box

@MikeMesserHouston Год назад

@@91cat I think the max current is 30 amps. If you use higher-amp fuses, you risk a fire from burning wires if it's overloaded or a short circuit happens.

@lukebaldwin3682 2 года назад

It's my understanding that the ground wire for my lights can go to a ground bus? Seem like I need to buy something else to make the whole system work.

@MikeMesserHouston Год назад

Typically, the vehicle chassis (all metal parts) are connected to the negative battery terminal, so lights can be grounded to the frame, bumper, etc.

@Danielxperez14 4 месяца назад

To add lights where do I put the ground or is it not needed?

@heavenlydemon2052 27 дней назад

casis

@justin4013 3 года назад

So is there no negative wire the needs to be screwed in with the positive??

@Retvet98765431 3 года назад

Yes and no, Yes, your lights need to be grounded. You can either connect the negative terminal of your light to the negative on the battery, or you can connect the negative to any grounded source of your car. (usually any metal frame piece)

@guillenricky55 3 года назад

@@Retvet98765431 thanks bro your comment helped me out I was tripping out thinking I installed mine wrong but now I see ill just connect my negatives to the frame/ground 👍

@MikeMesserHouston Год назад

The under-hood box (the relay box) does have a negative lead that must be connected to the battery's negative terminal or grounded to the frame of the car.

@bucktoyota 2 года назад

Jow do you dim it? Why no good intentions in the box?

@MikeMesserHouston Год назад

The only dimming function is the back-light. It automatically dims in low ambient light, and brightens in daylight. The power to whatever lights you use is either 100% on or off.