6040 CNC Router milling and cutting ½ inch Aluminium plate

Подписаться 301 тыс.

Просмотров 3,3 тыс.

50% 1

A Roger C Webb CNC build Router tutorial The Australian Inventors Workshop™ 2022 Video 732 6040 CNC Router milling and cutting ½ inch Aluminium plate
Thank you for watching
Help support my channel and become a Patron
www.patreon.co...
The Australian Inventors Workshop™ 2022
Sponsored By
Thunder Laser Global
My CARVECO 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
store-us.carve...
Everything @ Banggood DE 2.5% discount
(ONLY AT THIS ADDRESS BELOW)
aklam.io/9Dh0ux
My Fusion 360 20% discount
(ONLY AT THIS ADDRESS BELOW)
Plans and parts listing available on my Patron pages for the, AMAX 3636, MIDI 4040, MAXI 1212, and AMAX 3636 CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe + Mach 3.5 Info
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 12

@jeremyross5164 Год назад

Use shorter drill and lower speed and feed . Way less chatter . Much better cut . Only need about 10,000 rpm 10in a min .100 pecks. A rigged 1.5 csml works great in aluminum. Love what you do Roger ! Learned so much from you over the years. Just took delivery of my new forsun 4x8 vac table router two weeks ago . About got everything wired up and ready to test run . Have some issues getting NC studio on my Windows 7 PC . Hoping to have her moving later this evening 🙏

@TinkeringJohn Год назад

I bought some longer rails and will rebuild my machine. It is made from MDF wood and I was thinking of making the rebuild from the same material. Now I am thinking that if I want to do some aluminum cutting, I should make the new machine from aluminum. I will also design it somehow to contain the chips and coolant/lubricant from going everywhere. It does look like your machine now needs to go through the car wash. LOL.

@ronwest4283 Год назад

Oops. You stated the spindle RPM at the end of the video. I can quess at the feed rate form watching the video.

@spudnickuk Год назад

Thank you for sharing Roger. Does art cam have features to maching Alluminium because i can get a pc with it on for next to nothing. When watching you drill with an extremely long drill bit i was gritting my teath. for the new person, use as short as possible drill bit and cutter o you reduce the flexing in the tool and so makes maching more rigid.

@gizmobowen Год назад

Sorry if you've already shown this in another video, but it seems like a fogger that blows air with a little bit of coolant to lubricate the tool and remove the chips would have been very helpful in this situation. I don't know if you've already shown that in another video, so sorry if I'm suggesting something you've already covered.

@ronwest4283 Год назад

What feed and spindle speed were you using.

@xyzspec82 Год назад

For a machine that size, I was expecting some better and much faster cuts. The Z axis seems really weak... Subscribed! 👍🏼

@TinkeringJohn Год назад

Hello Roger. I have subscribed to your patreon at the 4Axis tier for 1 year. I sent you a couple messages, but never got a reply. I know you have abandoned the SMC controller, but wanted to know if you had ever set it up for a Z axis zero setting pad.

@rogerwebb9600 Год назад

Hi John, I will check on Patron and get back to you there, I don't know what happened to your message

@TinkeringJohn Год назад

@@rogerwebb9600 I wrote 2 messages in the Messages section on your patreon page. Thanks.

@rogerwebb9600 Год назад

I cannot find you on my Patron listing!

@TinkeringJohn Год назад

@@rogerwebb9600 Sorry Roger. I forget that people see me only as TinkeringJohn on YT. On Patreon, I am John Walt. You replied to my comment about setting up a Z auto tool on the SMC. I also commented there that I am TinkeringJohn on YT. Looking forward to seeing you do that. Sorry about your flooding issues. Now I know why it took a while to respond to my Patreon message. Good luck and Cheers Roger.