Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
I'm doing a list video! 65 Tech Tips for FPV Pilots! You'll know about some of these, but I bet most of them will surprise you!
For more info about these tips...
#7 - Why two omni antennas work better sometimes
• Why two omni antennas ...
#18 - How to set up Crossfire LQ / RSSI in Betaflight
• How To Set Up Crossfir...
#19 - Crossfire emergency update procedure
kamikatze-fpv.de/tbs-crossfir...
#24 - Props-in vs. Props-out
• Props-In (Standard) vs...
#25 - How to set up a Prearm mode
• Learn To Build a Racin...
#25 - How to set up 2-switch arming
• Safer Switch Arming on...
#33 - How to do the L1 inductor mod
• Fix Rapidfire Low Powe...
YOU ALSO NEED TO DO THE SAME MOD TO THE L10 INDUCTOR. The L10 inductor is on the top side of the DVR board, on the left side of the board. The DVR board is in the top half of the goggle shell. The L10 inductor is quite large and I recommend simply jumper-ing it with a wire, instead of trying to remove it.
#34 - FPV flight line best practices
• FPV Video Channel Inte...
#36 - How to set up all your aircraft on the same model
• FRSKY TARANIS HOW-TO |...
#55 - How to set up turtle mode
• Turtle Mode & ESC Beep...
#57 - How to remove ratchet from Taranis
• How to remove the thro...
#64 - How to build a smoke stopper
• Why you need a smoke s...
13 июн 2024