70-72 chevelle door internals guts assembly how to DIY a body GM 

Your videos have helped me put my 70 back together after getting it back from paint with nothing assembled and parts missing. thanks for putting these out.

Thank you very much for the video as I have a 69. Where the doors were all apart when I got them. And not all the parts are there so this was very informational

Chris ,it's me Roger. Thanks for the tip. My The door on my 70 Monte opened right up with one soft kick.You a baaadman.

Thank you. It was 4 years ago when I took mine apart. I took some pictures, but your video is way more detailed than what I have! Thanks again!

Literally the perfect amount of detail and explanation

Thank you Chris, I just did both front door windows, replace with new glass, because of you video I found 5 parts missing, all are in now. Complete re-build better then new. Joey -1970 Chevelle SS 454

Very informative and well done. Thanks for taking the time to post it on the tube. It'll help many of us gearheads.

Best hand model ever! Kidding, thank you - awesome, needed it

Awesome video I followed your instructions on my 70' Monte Carlo and finally got my windows in correctly. It is the same hardware and internals as the Chevelle

thanks for the help chris! we need more ppl like you in the world

AWESOME CHRIS!!!!!! This was exactly what I needed for my doors. Thank You

Great job on the video! I took my doors off a long time ago. I'll be able to reassemble them now using your video.

Wow great video, could not of ever installed without your help

Ur God sent man glad sumone is properly touchin on oldschools I have a 88 cutlass supreme first oldschool I love it jus needs sum lovin

Great job Chris. Thanks for all the videos. I'm on my 4th Chevelle and appreciate the detail. My current Chevelle is a 1969.

Thanks for the video .. Had the rattle window issue. the door side felt guides was the issue... Replaced them and all GOOD!!!

Chris - Thanks for posting this video. I just picked up a 72 Chevelle that somebody started to restore. The new doors are shells and while I could figure it out this video takes all the guess work out of it.

Solid vid Chris. This setup is almost identical to a Cutlass. Helped me refresh my mind on how to put mine back together. I took step by step pics, very detailed... but my hard drive crashed and I lost all my project pics! So this was a huge help. All your vids are really good and you're very detailed which I love👍👍

Great job you explain everything wish i had a chevelle

Thanks for this video.. I just purchased a 70 monte carlo and the doors definitely need some cleaning.

Great teacher. Thank you.

You've saved me with this (and your other videos!!) Thanks so much!

Oh God you are a life saver!!!!!

Great video and attention to detail!!

Nice videos Chris! I have a 1969 Chevelle that I need to remove the doors off of, there are lots of internals loose and clanking around realigning will be the real complicated task.

Great Job thank you keep the good work

nice detail i would like to see you do the door panel and adjust the glass when you get there man i will have so much work to do when i get to the 68 chevelle but your videos will help out a lot thanks

Great video, thank you.

Great video

Excellent Vid

Awesome video. 👽

Awesome!

Man, thank you so much. This video really helps. Do you have a video on how to adjust the glass? Thanks!

Thank you!!

Great videos first off, second I was wondering if you could do a video on cleaning out speedometer cluster without pulling dash completely out! Just want to clean out inside of plastic so I can see the numbers! thanks for your time and the great vids!

Great video. Where can you find those black plastic buttons that snap into the glass? The ones on my door are cracked and dry rotted.

Great video- I think I just need those 'breakable" white pieces. Do you need where I can get them? thanks..

any chance you can swap out the old kit and install it in a new fiberglass door?

does any thing go to the door lock cylinder ?

Lot of engineering inside a door. No idea what grease was used, I just use chassis grease except late models. On those I actually use the same white grease that's sold for garage door tracks. Works nicely.

Can you please show how and where to bend the door handle rod like you mentioned when the inside door handle dosen't pull the door latch enough to open it.

Where do I get the clip for the rod to the door latch ? I have a 70 Chevelle and my door rod for the passenger side door keeps falling out and I realized it doesn’t have a clip there to hold the rod in place . Video marker 11:41 is where the clip is mentioned and shown I just don’t know where to get one

sometimes the paint supply stores have the clips for the doors. I m going to be putting some dynamat on the door. the thin kind.

Nice work . Is there any chance you can tell me how to open a stuck door on my 70 MONTE CARLO. I put new weatherstripping on the door then closed it with no door panel and now it won't open from the inside or outside. Do you have any suggestions. Please respond. Thank You

Chris. Any way you can do the back window install in a new video. I have a 69 GTO but windows and doors seem exact same. Dash wasnt

Did you use the original rod? I can’t find one for sale anywhere

Can the outside door handle be replaced without disassembling the internal door parts?

What did you let the metal items soak in?

Where can I buy the clip for the inside door handle rod? I can't find one online anywhere.

What happens if you didn't mark your glass bolt holes when you reassemble?