7mm PRC from Yavapai College, Range Day 

That rifle flat out shoots! Well done Yavapai!

Great project and those are some of the best results I've seen with that cartridge. One lucky winner awaits!!!

I've loved this series, it's a great rifle. Someone will be extremely lucky.

Thanks for the opportunity! Greatly appreciate this whole video series. I’d love another shot at a short barreled chassis 7 prc.

Thanks for putting out good data. There are some other channels putting out hit pieces on 7prc.

I’d like to see HTV do a totally custom lever or single shot rifle. Something meant to be carried all day in the field, that is at home on the range and in the woods. Keep up the good work you guys, your channel is a true pleasure to watch.

That rifle is a shooter! The rifleman is also dang good shooter!

Really nice rifle, great video. Thx.

Excellent video! Great gun, great shooting, and very informative load data. Big thumbs up!

Nice job! Thanks for sharing!

Got 2 7prc long range rifles love this calb

Beautiful rifle! If Yavapai wants to build my dream rifle, make a lightweight stalking rifle in 250 Savage Ackley Improved. Put a 2 - 7 lightweight scope on it and keep the whole thing to 7 pounds.

I'd like to see a predator hunting rig chambered in the new .22ARC. According to Hornady it's a tack driver with an 18" barrel in an AR platform. But personally I like to see a bolt gun with an 22" barrel minimum. Or maybe even a .22 Creedmoor build.

Would love to see a build for a light weight, 5lbs without scope, 20 inch barrel and chambered in classic .358 Win. for close in stalking rifle. Would be ideal for hunting heavy cover. I recently purchased a Howa Super Lite in 6.5CR and it's a joy to carry in the woods.

Thank you for a comprehensive look at this cartridge,,great workup with alot of powder and bullet data,,alot of guys bashing this caliber with not much data shown ,I agree hornady may have inflated speeds a bit,however I think the efficiancy and updated options of the 7 rem mag is a plus,,,Alot of guys want to compare it to the 28 nosler unfairly way smaller charge ,I own all the 7's and like them all however I think the prc offers the most all around,cost ,accuracy and ballistics to many guys are overly concerned with muzzle velocity.

Beautiful rifle.

Awesome video and information. Great rifle and shooting.

Enjoyed the video. Very well done! I have used load data and find it very helpful! Keep up the good work, new subscriber!

A lot of people are in love with the new small cartridges with high BC projectiles. A video on a 6.5 grendel build would be awesome..

Thanks for the video y’all always enjoy them and really like this rifle. I would like to see a rifle built for the good ol 308 or even a 30-06 as a good all around hunting rifle kinda like this one. Thanks again and keep up the good work God bless

Oh heck yeah. Excited to see how it performs. Love to see how some of the 168 Barnes would compare to the 150s. Really seriously looking at getting a7 prc. Good coyote rifle. Maybe the new 22 arc

Watched it being built. Very Cool!

I like 7mm great caliber. I very much enjoy my 7 rem mag but I did get a PRc because in my state I can't use lead for hunting. I like the heavier bullets but need a faster twist for copper due to lenght. This is where the PRC comes in. I could have rebarrled the rem mag but I needed an excuse to buy another rifle. Thanks for the video and info, also enjoy the magazine.

I would like a walk about light weight varmint rifle in 6mm ARC with 24” barrel. Great rifle and video too!

On the next A good ol 06 or Dangerous Game would be cool

Good Luck To All

Thank you for the video

I think the gunsmith class needs to build two 6.5 Creedmoor chassis rifles and field a team in 2025 in the NRL Hunter match at Gunsite.

I also would like to see a 22 Creedmoor build.

Wish i could get my prc to shoot. Seems like everyone is shooting heavy bullets. This gives me a few more ideas so thanks. Also makes me want to take Yavapais gunsmithing classes

Ive been thinking and decsided that if you live in and hunt in a area you can see 35 miles with optics a 7mm is like a 30 30 for hunting of you hunt brushy trees open sight 30 30 is perfect. A 7prc is a long range conversion for a very good price in the current econimy we have been dealt now.

Very Nice

Ive read all of the comments and think all of them are based on a spending free willy i know mare than you mind set. This is why i now onw a 7prc.i had a 7mm and loved ot but the accuracy kept me from shooting any thing beond 500 yards for etichal kills. So i rebored to 7prc with a coustom barrel swap for less than 800 dollars. I recently killed a 6 x6 elk at 890 yards with one shot and he dropped were he stood the first and only one to do that if i use the 7mm before. So a cheaper way to get a amazeing ETHICAL peice of equipment. Thanks for the reloading info in thevvideo.

I really like the idea of a 338 Weatherby RPM. It would fill a niche for many big game hunters.

I would like to see something chambered in 30 TC in a lightweight hunting setup - great video

I really enjoy your information videos. I would like to see a long range highly accurate rifle. Thank you for all you do!

I'd like to see a blued steel/walnut 257 Robert's done up with a 24 inch barrel, fast enough twist to use bullets at the heavier end of the 25 cal spectrum. The world has enough fiberglass, stainless steel, and glass that challenges the Hubble telescope. The world will also not wobble off it's axis if it has one less 6.5/264 come into being...

Nice rifle but I had to go with the mossberg in 7prc .. haven't shot it much yet but planning on it ..

Love it. Keep up the great work. Love the magazine, Love your Channel. I cant tell you how I look forward to HandLoader Magazine, first day it arrives read cover to cover, second day re-read. in the weeks after read again and again. You asked for suggestions for the next Build. Personally I have been dreaming of a 9 lb. 22 CHeetah MKII. Rifled 1:10 or 1:9, targeting 60, to 65 grain varmint bullets. Rifled tighter just eats up Velocity, increases Pressure for the same velocity, and burns barrel steel. Personally I prefer the flat bottomed Winchester Actions, their 3 position safety, the Bartlein Barrel. From there I would leave it up to Yavapai College to finish it up. But a Graphite stock might be nice, and maybe a Set trigger so you would have a normal 3lb pull for field use on coyotes when you might be wearing gloves, and for target, Chuck, and gopher perforating, push forward for a break of a few oz's of pull if preferred when the temps warm.. Thank you for the opportunity.

Good job on the rifle and the loads, I have a ruger go wild and a remarms long range 7prc, I use rl22, rl25, h1000 berger 180s, the rdfs do well if you sort them out from ojive to base, the charges are close to the same as I am using, the 168 barnes works good too.

I like to see y’all build a mountain rifle in 280AI with a 26 inch barrel 😊

Ah back at having too much fun n Ya Forogt me again😢😂. Carry on. 👍 Seriously Though Would be good to do something on the Chronographs n compare em.

Nice gun. 26 inch barrel not something I would want for hunting especially since I have a can to put on the end. I have a 7mm and a 7rum with the velocity you get with the prc I’m good if not better off with what those offer. I do like the new shiny objects at times 6.8 western is higher on my want list then the prc

Yes I would like to see a varmint rifle😊

Next build: 300 WSM in a long action where 210 Berger is seated long following the PRC concept: Terminus Zeus action 8.5 or 9 Twist #3, 4, or 5 contour 24" long cut-rifled barrel 4 groove (Brux, Benchmark, Krieger, Bartlein, or K&P) Trigger Tech Diamond trigger Hawkins Hunter DBM kit McMillan, or AG Composite stock Loads: 210 Berger VLD 190 Speer Impact 180 Norma Bondstrike Nosler ABLR (pick your weight) Hornady ELDM or ELDX (pick your weight)

Still waiting on a 300PRC video! Good choices on powders on this 7prc. Would have loved you doing testing with some Nosler long range accubond bullets as well!

How about a walking varminter in 17 Fireball for your next build?

Didn't you guys do an article back in the day about a 6mm-204RR? That is a very interesting cartridge..... pretty darn impressive velocities out of a short barrel also... I would love to get a barrel chambered for one...

I’d like to see a medium weight 6 Creedmoor, a versatile rifle, varmints, antelope, deer, somewhat capable for competition.

Great video, lots of good info! Can you tell me what bench you are shooting off of???

Great video series can’t wait to see what comes next How do enter for the rifle

I'd like to see a fast twist 220 swift build. 1:7 or 1:8. I want to build one but but a little nervous because of lack of reloading info.

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-brH_2ooz05w.html 10:48 you can the muzzle blast blow the mic/sensor off the front holder and it falls by the chronograph. Amazing how accurate this rifle is. Thanks for showing all the different ammo loads.

I'd like to see a 7mm-08 build

When are we going to see the Type99 LMG video? Thanks for the content!

Loadin retumbo under 6.5 147eldm as I’m watchin J….in my waypoint prc retumbo,h1000, n560, and superformance and magpro are my magnum powders…never can catch rl’s as I know they produce some dandy groups also…I’m at 505rds in 13mons havin this carbon Springfield and it’s been impressive with a 25yr old Walmart Simmons 4.5x14x40atv scope…lol. I’ve got so many upper end optics I like I don’t know what I’ll end up with but the 22x lht up on the list…always a pleasure my friend….🫲matt

Someone else who occasionally puts a day in Hornady. Why do you have to ‘go ahead’ before you do something?

Excellent, four powders I can't buy anywhere... Nice looking rifle though.

How about doing a 416 Rigby?

How about a lightweight brush gun in 338 fed with controlled round feed. My suggestion

Ill keep my 7 Rem Mag...

I’d love to see a similar rifle in 280 AI. Under 6 pounds without scope.

Hi, I love your YT chanel very much and this video about 7 mm PRC is very educational and interesting. I have few questions: 1. With barrel of 26" , Berger 180gr VLD Hunting, powder Vihtav. N 565 (66.0gr) you are getting 2968 fps. What is the pressure with above stated? 2. I have Hodgon 1000...26"...Berger 180gr.VLD hunting... What is the powder weight for getting around 3000 fps and what would the pressure be? I hope it is still in the safe zone. Best regards from Europe!

How do u enter to win the rifle? Nice shooting rifle.

I would love to see and have a rifle in 358 win with a 20 inch barrel with express sights...you ask me what i want and that is it.....swamp spomper for hogs ane deer here in sw ga area...enjoy the videos

Build the exact same rifle chambered for 7mm Rem Mag with same barrel twist, throat angle & dimensions & loading for it the same bullets to hash out the 7mm Rem Mag vs 7mm PRC velocity disputes once and finally

Apparently hornady claims 2975 fps. With factory ammo for 180 grain match, with a 24 inch barrel. You're averaging 2925 with a 26 inch. Subtract 50-75 fps for a 2 inch loss of barrel length and you're getting 2850 - 2975... a full 125-100 fps SLOWER than hornady claims. Hornady might want to consider not inflating their velocities to market their new cartridge. 👆

220 swift