#84. Pendulum Quartz Clock Teardown

Подписаться 1,1 тыс.

Просмотров 31 тыс.

50% 1

Pendulum Quartz Clock Teardown
#83. Bottle Top Solenoid Engine from a Quartz Clock.
• #83. Bottle Top Soleno...
#82. Solenoid Engine from a Quartz Clock
• #82. Solenoid Engine f...
#80. LED Flasher from a Quartz Clock
• #80. LED Flasher from ...
You may want to watch.
#55. How to make the Arrow Illusion.
The arrow always points to the right.
• #55. How to make the A...
#56 How to make a Volcano for fun.
• #56 How to make a Volc...
#40. IC555, IC4017 and a Solenoid.
I’ve not seen this on RU-vid.
• #40. IC555, IC4017 and...
#39 Transistor as a Switch
• #39 Transistor as a Sw...
#38 LED Chaser. IC555 and IC4017.
• #38 LED Chaser. IC555 ...
1 Hz Pulse Frequency Generator with 555
• 1 Hz Pulse Frequency G...
Solenoid switch Fail
• Solenoid switch Fail
Simple Motor. Paper clip hack.
• Simple Motor. Paper cl...
Fun With PowerUp 3.0
• Fun With PowerUp 3.0
Paper Clip Motor 12 volt
• Paper Clip Motor 12 volt
Paper Clip Rocking engine. First trial
• Paper Clip Rocking eng...
Pulse Motor with 555 chip.
• Pulse Motor with 555 c...
#43. How to solve the Rubik's Cube
• #43. How to solve the ...
#45. AUX on car stereo experiment.
• #45. AUX on car stereo...
#48. Function Generator. (XR2206)
• #48. Function Generato...
#50. Generator Experiments.
• #50. Generator Experim...
#51. Motion Control Drone.
• #51. Motion Control Dr...
#65. Steam Engine kit repair.
Part 1 of 2
• #65. Steam Engine kit ...
#66. Steam Engine kit repair. (Part 2 of 2)
• #66. Steam Engine kit ...
#62. How to make a Put Put/ Pop Pop Boat. (Part 1of 2)
• #62. How to make a Put...
#63. How to make a Put Put/ Pop Pop Boat. (Part 2of 2)
• #63. How to make a Put...
#67. Moon Mud.
• #67. Moon Mud.
#71. Making Steam Engine Pistons.
• #71. Making Steam Engi...
#77. I made a Rubber Band Car.
• #77. I made a Rubber B...
#78 Diamond Shaped Wind Spinner Hack
• #78. Diamond Shaped Wi...

Наука

Опубликовано:

22 авг 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@noelaruldas1152 Год назад

Thank you very much! This video is really helpful! This video proves that quartz clock moments can be repaired and restored either it may be normal or pendulum model. So that people will no more get tempted to throw old, damaged and unfunctioning clocks into garbage or by the side of road or street as waste. Instead they would inspired to repair the quartz pendulum moment when the pendulum stops.

@JustFun-iz9rf Год назад

Thank you it was a great project and I do love these clocks. I have found old ones which I have kept in case there is a new project i can make 🙏

@GrandadIsAnOldMan 4 года назад

We have a bit of a theme going on here with these clock mechanisms. Fascinating subject.

@shrawan12321 4 года назад

Hi there! I would like to know where you got this unit. Our magnetic section of this pendulum broke and I would like to replace it. Please let me know. Thanks.

@JustFun-iz9rf 4 года назад

Hi I had this for years but do not remember where I got it from. You should be able to buy from the internet. Take care

@ipohjohn1 3 года назад

Can you help me to get my acctim rotating cluster of 4 balls rotating again as it suddenly stopped. I would like to ask you how to check the magnetic coil. Thanks

@JustFun-iz9rf 3 года назад

Sorry my friend I’m not sure I can

@JustFun-iz9rf 3 года назад

After putting a new battery you need to open it and have a look if anything is stopping it. The electronics last a long time unless it’s been dropped. It’s hard to say without looking at it.

@shaundalgado5779 2 года назад

Where can we buy the circuit board of the pendlum

@JustFun-iz9rf 2 года назад

I do not know but i and other people have made pendulums you can use to make one. Kind regards

@reactionx1041 2 года назад

Can i use this thing to make a n automatic wagging tail for a cozplay?

@JustFun-iz9rf 2 года назад

I suppose go for it 👍🏼

@GrandadIsAnOldMan 4 года назад

A guess at the big coil with 3 terminations would be that is two coils. One to detect the magnet on the pendulum and trigger the transistor to pass current through the other coil to repel the magnet. A guess on the mechanical mechanism is there is some sort of ratchet effect that prevents the little magnetic armature thing going back. Looking around 05:48 does the top of the rotating magnet have a have a sort of helical shape. I have put my box of bits away again at the moment so I can't check here. I am trying to get some other work done. Some of Lidmotor's pulse motor circuits have the coil with the centre tap to trigger the transistor so you might find some of his videos helpful.

@JustFun-iz9rf 4 года назад

GrandadIsAnOldMan yes I think you’re right on all counts. I thought as much about the coil I’m going to try and make one soon. Thank you

@GrandadIsAnOldMan 4 года назад

@@JustFun-iz9rf well there is a coincidence. If you haven't already seen it, you might like bigclivedotcom's latest video which covers this sort of circuit ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-MHRxYtVD1IU.html

@TechnoKriArt 4 года назад

So nice Dear New Friend Stay in Touch Dear

@RWgold111 3 года назад

I have exact same one but pendulum is very weak, any ideas how to fix

@JustFun-iz9rf 3 года назад

I’m not an expert but a new battery and make sure the contacts are clean. What made my clock slow was when I put the battery wrong way. The electronics should be okay. Can’t tell until you open it up. Hope this helps good luck

@JustFun-iz9rf 3 года назад

Also I’m thinking if the pendulum is sticking anywhere. Sorry just thought of that