mine 1.5 wagon was been stored for 5 years and it was running by brake cleaner so I assume the engine is fine. Yesterday I finally sort out the fuel issue by change fuel pump, filter and injector, then it sound like it has no compression, we measured it, and it has 40-50psi across all cylinder. We then add some engine oil into one cylinder, surprisingly it start up, but when we drive it, it make pining noise when we press the throttle, almost sound like some heatshield on exhaust is loose (but I quite sure it's not), donno if it's detonation
I did an engine swap on my 88 Crx, rebuilt and painted. Sure enough the paint caused a bad ground on the thermostat housing. I chased that issue for hours 😆…
Yes it was probably the paint, but its weird because I did not have a ground issue in the last video. In the next 88 wagon video I fixed this and added more grounds. I didn't have the ground from the trans to the frame rail either.
