'94-'02 Dodge Ram Power Steering Gear Box Replacement - Step by Step!

Подписаться 7 тыс.

Просмотров 195 тыс.

50% 1

OTC Front End Service Kit: amzn.to/2JnFVAO
1/2" Tekton Torque Wrench: amzn.to/2xwxmRz
3/8" Tekton Torque Wrench: amzn.to/2Uvf4cs
Tools I use:
Milwaukee 3/8" M12 Impact (bare tool) - amzn.to/3Etyxyt
Milwaukee 3/8" m12 Impact (kit) - amzn.to/2ZuUDBe
Milwaukee 3/8" Ratchet - amzn.to/3Bp4ru3
Milwaukee 1/2" Impact - amzn.to/3GtNUIU
Milwaukee Flashlight - amzn.to/3EtzeI5
Milwaukee Fuel Combo Kit - amzn.to/3w0ZVRq
I am in no way sponsored by Milwaukee, I am just a huge fan of their tools. It really helps this channel by purchasing through the product links I provide, thank you.
In this video I show you how to replace your steering box on a '94-'02 Dodge Ram! The pickup in the video is a 1998 Dodge Ram 2500 5.9L 12 Valve Cummins, but this should work on many different versions of the Ram - Including gas and diesel models 1500, 2500, 3500!
The steering box I used is an upgraded unit from Red Head that I bought from Diesel Power Products, and it has great reviews.
Check out my other videos for more Dodge Ram tutorials!
Fuel Line Replacement: • Fuel Line Replacement:...
Starter Removal: • Dodge Cummins Starter ...
Make sure to Subscribe for more!
OTC Front End Service Kit: www.amazon.com/OTC-6295-Front...
Pitman Arm: www.autozone.com/suspension-s...
Red Head Steering Box: www.dieselpowerproducts.com/p...
Bleeding your power steering system: • How to Flush Your Powe...
WARNING: Consult your owners manual for proper torque specs, the torque specs listed in the video are for my vehicle model! If you have a similar vehicle as mine, please double check the toque specs in your owner's manual.
Disclaimer:
I AM NOT A PROFESSIONAL
Due to factors beyond the control of myself, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of myself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Jake.
Keywords:
cummins
12 valve cummins
24 valve cummins
2nd gen cummins
1st gen cummins
first gen cummins
dodge cummins
dodge
cummins
ram
lifted cummins
3rd gen cummins
turbo scream
straight pipe cummins
big turbo
turbo spool
rollin coal
rolling coal
4th gen cummins
12v cummins
24v cummins
powerstroke
duramax
diesel
injectors
cummins injectors

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 146

@rpvilleneuve 5 лет назад

man! I was about to pay ALOT of money to have someone swap mine out!(to the tune of 500 dollar for labor) I'm going to tackle it myself no problem love all the 2nd gen videos!!!!!

@zachdavis4103 5 лет назад

Thanks! Well done! So many of these videos I find here on RU-vid don't teach me anything. I end up wondering why the person even made the video in the first place. This is perfect instruction, good light, concise and useful. Thanks

@Navs126 4 года назад

Zach Davis welp that’s because they’re diesel vloggers and not actual technicians 🤷🏻‍♂️

@raymiller9391 5 лет назад

Thanks Jake just getting ready to change the steering box on my 2001 ram. Very helpful!!

@Cee1019 4 года назад

Very greatful to see the exact process in a nice clean garage so that i know what im doing while i go lay in the snow at 7 am ^^

@CodeRed21288 Год назад

I have to give the biggest thanks man. Think about all the time and money people like you help save. I got this done in a day and it saved my job, which I’m turn saves everything else. So again thank you so much bro

@boldendorion 2 года назад

The low quality videos are the best . This will make a easy work when I do mine . Thanks

@digginwithhiggins7154 3 года назад

Great video! Thanks for taking the time to explain and for all the wrench sizes!

@leefeekes4289 4 месяца назад

I'm going to be replacing one in a 2001 3500 ram van 5.9 liter non diesel. Hope everything works out the same. I'll let you know

@paulgarcia1040 Год назад

Nice of you to mention the wrench sizes. Makes it much easier to do this.

@jenniegarcia9308 4 года назад

Great video.. This job sounded hella intimidating but your video really eased my anxiety of doing it myself. Thank you

@j-bobsgarage7535 4 года назад

Glad I could help!

@michaellumpkinjr2052 5 лет назад

I have a 12v myself wish I would've seen your video before I did the swap would've made things a lot easier thanks

@andrewhansen4179 6 лет назад

Hi Jake. Good video. I just installed a RedHead steering box and used your video as a prep. Just in case others follow your video, I have a few different torque specs shown in my repair manual. Intermediate steering shaft pinch bolts...36 ft/lbs. Three attachment bolts of steering box to frame....140 ft/lbs. Sector shaft nut.....185 ft/lbs. Four sway bar/bushing attachment bolts......40 ft/lbs. All specs for 1999, 2nd generation 2500 4x4 diesel. RedHead steering components are excellent, with excellent customer service to boot. Thanks for the video. A.

@j-bobsgarage7535 6 лет назад

Thank you for the comment, yes I recommend looking up the proper specs in a manual, I think I got my specs from Cummins Forum because I didn’t have a manual. Again, great comment! It’ll definitely help people!

@phendrix9476 Год назад

Those specs also apply to an ´01 2500 Dodge

@someguy19x 6 лет назад

The crown jewel for the 12v

@buixote 4 года назад

Holy Crap! I've been pulling my pitman arm for *days* now... penetrating oil, heat, impact... that sucker ain't goin' nowhere! I'm watching your video to see how to take the box off... will put it in the press and get that sucker off! Thanks!

@workingshlub8861 4 года назад

take the seatbelt and wrap it around the steering wheel and lock it to keep from moving...

@GregoryJohnston77 4 года назад

I'm that guy that puts the impact on the puller 😂🤣🤣🤣

@digginwithhiggins7154 3 года назад

Same 😂

@billymorrow43 3 года назад

Just done it twice just yesterday

@digginwithhiggins7154 2 года назад

100%

@clark5486 Год назад

Same. And I'm not greasing my threads lmao

@sebastianpistritto-yp8gy 7 дней назад

That was a great way the way you described it it was like a b and c thank you my friend I appreciate it you really helped me out

@jbygodd 4 года назад

Great video !! Helped me out alot !! Thanks 👍🤘

@Cc75757 4 года назад

Thank you sir. Great video.

@warrenzonator 5 лет назад

Tip #1 - git under there and pressure wash it first, I don't even get mad when people complain about wash fee shops charge sometimes

@joshuagarrison330 11 месяцев назад

Very informative video, thanks alot the torque specs definitely help.

@rudygomez6996 5 лет назад

Thanks for video, very helpful

@peterd2587 2 года назад

Best video I found on this

@slit4659 4 года назад

I have a 01 Dodge 174 Thou and had A'lot of play to...Not as much as this guy....I had Les Schwab install mine....After a Year it's still nice and Tight and Steers Great....I'm was around $680 having it done....Glad I did it.

@pelvismc 4 года назад

Really good vidéo ! Thank you

@uwebuehrle6381 3 года назад

Warm the tie pitman slightly up, it expand and gives the rod end cone easy free !

@jkline999 Год назад

Thanks for the video. After a year, my redhead went tits up. For $50 they sent me another, so I get to do the job twice. Thanks, so much, team RedHead!

@knight4869 5 месяцев назад

Great video brother, I am confident I can swap mine afterwatching.

@imranvv 5 лет назад

Do u have to center the steering wheel or turn it to lock before you remove gearbox

@97Cummins Год назад

good stuff, about ready to do this

@L33CHW33D 5 лет назад

Goodness. So I followed this and turned out great EXCEPT now I can't get the steering shaft back onto gear it's like it's too long. And if I connect it up first I'm having a devil of a time getting the 3 big bolts aligned

@chrispeters4405 Год назад

excellent chance to use that neat knife

@bryanjones4985 9 месяцев назад

I ordered one of those Redhead boxes. $500, with a $350ish core. Extremely sloppy paint, damaged splines and threads. It looked like they just painted where the new seal is supposed to go. I didn't even install it. I just sent it back. I bought a new one from Napa. It was very expensive but it's brand new with a lifetime guarantee so I would only be swapping it with another new one if it fails, not someone else's junk "remanufactured" box. Going to install mine after I finish watching this video

@Kernfederate 2 года назад

You said you replaced your Pitman arm, is there a specific reason to do so or why you did it? Wondering if I ought to also. Thanks for the great video!

@xXGOTCRABSXx537 4 года назад

Did you turn the wheel to align the steering shaft on the new box ?

@tacatomon 3 года назад

Hey good video m8, thumps up. Question: Do you know if the steering gearbox of a 2500 4x4 gasoline is compatible with the diesel 4x4 version?

@waynehutchinson1423 4 года назад

Good vid.Why did you change the pitman arm.?

@davidanshel2772 6 лет назад

How to replace a power steering cooler box at bottom of a 2000 Dodge Ram 1500 ?

@TWINTURBOS4LIF3 4 года назад

Where can you get a replacement return line fitting that goes off gear box? Anybody know size ?

@patrickmuldoon3431 4 года назад

Did that take out some of the play and help the truck turn better?

@SM0NKnT0NK 2 года назад

How did you get the chassis so clean before you mounted the new steering box back on to it?

@maxx597 4 года назад

on the thread on the pitman arm it didnt have hole for cotter pin , so i drilled it and added one,

@javierlopez4545 4 года назад

Did you get to make a video on how to bleed out steering box system? I found the the installation video very helpful. Thank you

@j-bobsgarage7535 4 года назад

no i never did, but there is some good videos on youtube if you just search.

@jeremyschneider7783 6 лет назад

why no sway bar? I also dont see a steering stabilizer that truck must have been rough to drive! glad to see another 98 12v still alive like mine looking forward to more videos!

@j-bobsgarage7535 6 лет назад

The sway bar wasn't on the pickup when I bought it, no idea why, but I've done some reading online and people say that when they are off it gives the suspension more travel. I can't confirm this, but my dad has a 1998.5 24v Cummins and he has the sway bar and the steering stabilizer and you can't tell a difference driving his from mine, especially with my new steering box. The front end steering is an HD steering conversion the previous owner did, here's a like for more info about it if your curious: mopar1973man.com/cummins/articles.html/12-valve-2nd-generation/axles-suspension-brakes/98-99-hd-steering-conversion-r188/ Thanks for watching and it's nice to hear from other fans of the 98 12 valve!

@garrittcusack8702 2 года назад

When you installed the pitman arm to gear box it looks like it slid all the way up to the top of those splines? This is normal..? doesnt seem like mine wants to go that far up

@KooLaidblue Год назад

pro tip, if you're replacing them pitman arm also then leave it attached to the box and you can skip the special tool and extra work. Kudos on spending the extra time to show the viewers though.

@hunterfortner1852 2 месяца назад

Is the steering shaft able to slide up and down freely

@pullinslack5600 4 года назад

Great music

@eberduque7952 8 месяцев назад

Do you have a video where you bleed the system?

@stu7604 4 года назад

May I suggest that step one should have been to spray that working area with a gel type degreaser and power wash it off first?... I did so I didn't have to work through all the grease and oil. Questions: You already have a gear box stabilizer... so why did you need to replace your gear box? Don't the stabilizers work? Nice video!

@nautilus9008 4 года назад

If his gear box was original then it was worn out before he even installed the stabilizer. The stabilizer helps stop frame flex. It doesn't save a worn out gear box

@simpleepoxy 2 года назад

How much would you charge to do this job again?

@darlalarcom9739 6 лет назад

Why no sway bar? I have a 1500 2nd gen with steering stabilizer as well.

@momoreno944 4 года назад

Did the steering stabilizer help eliminate the play on steering wheel?

@bruspacheco2373 3 года назад

Hey, where did you buy the truck address box?

@Michelle-fy4vq 6 лет назад

Is this video good to use for a 2001 Dodge ram 1500 5.2?

@j-bobsgarage7535 6 лет назад

Yeah it should be, if not it’ll be very similar anyways.

@billiambarnett 5 лет назад

Did you add the brace in hopes that it would solve your problems and not need a new gearbox? I was thinking that also.

@benedictphoto 5 лет назад

i added the brace and it helped steering feel a ton, but i still have gearbox slop. it just doesnt feel like the steering wheel is buckling in turns anymore

@bobbyhill7430 Год назад

Aye g you installed the "drag link" upside down it's supposed to go on the other side of the Pittman arm

@joestargia 3 года назад

Hey i have a 2000 dodge 3500 need to replace the transmission u have any videos of that

@j-bobsgarage7535 3 года назад

no unfortunately. I replaced the transmission on this pickup before I got into youtube. its really easy tho. do some searching and read forums, lots of good info out there

@ManInTheBigHat 5 лет назад

So do you like the RedHead? Did it take that play out without adjustment?

@atlas3863 5 лет назад

ManInTheBigHat Yeah I was wondering about that myself I’ve seen a couple of these videos but no one talks about if it actually fixed anything or not or if It was worth it over a new stock box....

@billharmon1084 Год назад

@j-bobsgarage7535 how do I know if I should replace my pitman arm?

@terrellupshaw1433 5 лет назад

Do you have to take the pitman arm out to replace the gearbox?

@j-bobsgarage7535 5 лет назад

Yes because you have to swap it over to the new gear box that’s being installed

@bryanzhinin6127 6 лет назад

Hey sorry to bother you again but I was driving and I had to brake a little hard and the pedal just sank on me and the abs light went on idk if I need new brakes or something else happens

@truckcampertraveler7369 5 лет назад

Bryan Zhinin air in your line

@Jdl223 2 года назад

I got that metal line on the top with a 18mm line wrench crowfoot and a wobble extension , if anybody has trouble

@jacobduffy6860 2 года назад

I couldn’t get the gear box off the steering column to save my life. Don’t know what I’ll do about that. Any tricks?

@Black0ut9150 2 года назад

Can this Gear box be a probable cause of a powersteering leak?

@justinclark3840 6 лет назад

Got a 98 1500 and will be doing this replacement soon, good video was wondering if you've replaced your shocks and if you had any recommendations on the different brands

@j-bobsgarage7535 6 лет назад

I'd recommend bilstein 5100s, I'm going to put those on soon

@thankfullife7968 6 лет назад

Jake couldn’t agree more in the bilstiens. Rough country replaced 3 sets that leaked within first year and then 5 yrs ago went to Bilstien 5100 and still work great!!

@Jwagnon89 6 лет назад

So is it still holding together nice and tight?

@j-bobsgarage7535 6 лет назад

Yes sir, about 6k miles on it since the video

@rhecyeeyeejake7184 Год назад

ItS a GrEaT dAy To DrIvE a DoDgE 😂 indeed every day driving one is good

@glennboone1082 3 года назад

Did you forget the o rings? Or just not covered in the video?

@kr4dh4x0r 4 года назад

Holy leaks bat man.

@dewywildon8880 6 лет назад

How's it steering now? Would be good to add a video of the result

@j-bobsgarage7535 6 лет назад

Steering is way better, I thought about doing a video of the result but it would be kinda hard to do that because you feel it when your driving, a video just wouldn't capture it very well I feel

@nsboost 2 года назад

@@j-bobsgarage7535 You showed us the steering wheel play in the beginning. I don’t know why you didn’t show us the wheel play after I watched a video of someone drive it after and before they even said something I could see how much better it drove.

@rpvilleneuve 5 лет назад

there is a laundry list of "that's what she said" jokes in the video 😂😂😂😂

@kota001 5 лет назад

Ever replace power steering pump

@j-bobsgarage7535 5 лет назад

Yeah did that a few months before, and also rebuilt the vacuum pump

@oscarwalton1188 4 года назад

You should get a sway bar

@shanesink8073 4 года назад

Two years later, how do you like this steering box???

@j-bobsgarage7535 4 года назад

Awesome. Feels just as good as it did the first drive with it two years ago

@thuss5162 6 лет назад

Nice your dash is one piece . my 96 the dash is junk. I was looking at a Sorensen the are supposed to be good. This looks better

@eljoven732 5 лет назад

Wait so is there a way to make the dash look new again?

@dumbeezy5480 2 года назад

Can this be done with the wheel on the ground?

@j-bobsgarage7535 2 года назад

Yes but you need to wheels off the ground to bleed the system when the job is done

@dumbeezy5480 2 года назад

@@j-bobsgarage7535 thank u sir

@ChevoMKY5.7 2 года назад

Can those be rebuild?

@user-ni9ms3gl8z Год назад

Yes

@Jdl223 2 года назад

Did anybody add gear oil to the box or did it come full?

@j-bobsgarage7535 2 года назад

I just put in another box into my dads pickup last weekend and it came full

@Jdl223 2 года назад

@@j-bobsgarage7535 thanks, did you use atf or powersteering fluid? I ended up using atf for my reservoir. Some people say that's bad but I already had the box on by the time I realized I didn't drain the box, redhead uses atf I guess

@j-bobsgarage7535 2 года назад

@@Jdl223 I used atf in mine havent had a problem and its been a few years now. Used power steering fluid in my dads the other week, working just fine also.

@uainttheone 2 года назад

I just put one of those the big one the heavy duty like 1100 bucks cuz they wouldnt take my f****** core because the shaft was snapped.. the things already leaking like a sieve.... And I ran into a mechanic at the gas station he told me he has something to do with the air conditioner . Said people usually delete the air conditioner when they put the redhead on.. I just looked at him like he was crazy cuz there ain't no f****** way I'm taking my air conditioner off. I'm thinking to have something to do with the 38-in tires

@chrishicks4999 2 года назад

You got off easy, I had to cut my pitman arm off of mine

@j-bobsgarage7535 2 года назад

Uff da that doesnt like too much fun

@bryanzhinin6127 6 лет назад

Hey so my 2001 2500 Cummins ho has a steering problem where I literally can only in a straight line I can’t turn at all it’s really stiff and my brakes also are stiff to press down on any ideas what it might be ?

@j-bobsgarage7535 6 лет назад

Could be a few things honestly. The first thing I’d check would be the power steering pump because the brakes and the power steering box are both powered by the power steering pump. Doesn’t sound like a common vacuum pump issue because the would cause the brake to feel really squishy. But check the power steering pump and go from there. If the pump is good it’s more than likely two separate problems. I’d also check out Cummins Forum, tons of info and I’ve solved many problems just by researching and reading threads!

@bryanzhinin6127 6 лет назад

Jake thanks will do

@bryanzhinin6127 6 лет назад

Hey so my truck has a little blow by is that normal ?

@j-bobsgarage7535 6 лет назад

Yes, a little blow by in the 12 valve is pretty normal. They don’t have the best breather system ever. So what I did to help is to put a hole in the oil cap and run a hose from it to a bottle. Doing this helps relieve crank case pressure. I’ve also seen guys vent the valve covers.

@bryanzhinin6127 6 лет назад

Doesn’t matter if it’s a 24v? No right

@tacklebaseball1078 4 года назад

Did it fix the problem?

@romanstar7550 4 года назад

ive a 2000 2500 4x4 ram . steered like a boat , all over the road . watched a ton of vids , talked to a bunch of people . replaced the gear box with a remanufactured one , didnt help . was play in steering column so put one from junk yard in that didnt have any play , didnt help . aligned it , didnt help . new front sway bar links , didnt help . went to a local highly respected alignment shop , told me the track bar was worn so replace that b4 aligning . he also said these rams are famous for sloppy steering , as in dont be real hopeful of getting it perfect . he also said its worth theextra money to buy the redhead gear box . though i add theres a vid here on rebuilding own gear box and it isnt real difficult . so im doing the track bar and also replacin the stsabilizer shock with the heaviest duty one because ive seen guys say that helps alot . btw , within the past 5000 miles i did upper n lower ball joints , all the tie rods , shocks , tires .

@mikepodojil9773 3 года назад

@@romanstar7550 am i missing something here? Did you get it fixed? Did you rebuild your old unit or buy the red head, or? How did it come out? I'm about to rebuild mine or replace it, not sure which yet but it needs replaced.

@romanstar7550 3 года назад

@@mikepodojil9773 didnt get fixed so driving other truck . put an oreily reman gear box on still swerves all over road . im trying this gear box stabilzer bar at link next . www.amazon.com/dp/B01N7W04VE?psc=1&pf_rd_p=de8506a5-56d5-4c6c-86fc-6a6d5de7bc06&pf_rd_r=5K3MVQVRR8QJ7Z22ZMDM&pd_rd_wg=VIuc5&pd_rd_i=B01N7W04VE&pd_rd_w=cYGeS&pd_rd_r=138060e3-bba9-4de1-abf3-5e2bc439ccfb&ref_=pd_luc_rh_rtpb_03_01_t_ttl_lh

@dk-bw4gk 3 года назад

I waited til the end to see how much play was removed... Finding a quality Dodge steering box is a PITA.

@flawless2142 5 лет назад

What intake do you have geez 😂

@themessaroundchannel8855 3 года назад

Looks stock

@blackshirt4ever02 5 лет назад

You do know that you can adjust the gearbox, right?!

@MrTtillots 5 лет назад

Brody Heilig how do you adjust it?

@blackshirt4ever02 5 лет назад

There is a hex head bolt/nut on top of the gearbox. I am trying to remember how it’s done, but I believe there may also be a lock nut too. But I do know if you tighten it too tight you can screw up the worm wheel inside the gearbox.

@MrTtillots 5 лет назад

Brody Heilig thanks man!

@j.r.w7636 5 лет назад

I’m gonna have to try this before buying a new box

@Jaymachine 4 года назад

usually the gearbox is more worn in the center so be aware adjusting your box and make sure it does not bind at full turn.

@willgutierrez3064 2 года назад

*Cries at part prices in Canadian

@gregreece2073 5 лет назад

Good video, thanks! Will DIM it! Say I noticed (& read here) that's tranny fluid, right? Instead of Steering fluid? Gotta be a good reason...please FILL ME IN! Thanks again! SmknLZRD

@TheKillerMarine 5 лет назад

That's just what Dodges use

@ShainAndrews 5 лет назад

I've used ATF or hydraulic fluid (HiTran or HiGuard) my entire life. Never an issue. Then again I actually change power steering fluids yearly. Amazing how maintenance stops things from breaking down or leaking.