96 - 00 Honda Civic EX EL Glow Gauges Installation and Demo Radiant Red 

At first I thought you had to take the original gauges out, until I realized these are overlays. I own a set of 90s Ractive gauge overlays for a 92-95 Civic, I didn't realize under now it works like this. Thanks for the video!!

Thanks to your video i managed to successfully installed an aftermarket afterglow to my 98 Civic HB. Very informative!

Thanks for this. Installed on an 02 civic ex. Made the install super simple after giving this a watch. They look super nice.

Thanks so much man for the tutorial my dad bought me a 96 civic for my birthday and we’re turning it from basic to import and this video helped out so much as we bought the same exact guages

Nice I got the same one too. Good job man I needed this diy.

This was way easier then I anticipated! I remember looking up how to convert the 92 prelude to the digital Gauges from the 96 Prelude SI and man it looked like a nightmare. I can Def do this on my civic! Great video, you got straight to the info we needed. And lastly HUGE props on doing so much of this with one hand! Hahaha and you didn't take forever doing it

good video man , nice description. looking to do this on my 97 Ex.

It's beautiful ,nicely done

It looks amazing. Great video. Very informative and in depth. It's too bad the needles dont light up as well

Thank you for this video. I watched 2 other videos and they both skipped the temp/fuel gauge face. I was having trouble woth slipping it over the needles but this video helped me so much thank you again

Good rule of thumb while doing these, Don’t clean the inside of your lens, but with only one exception. If you’re in a very dusty environment, and you can physically see major dust buildup on the inside. These clusters are extremely resilient to every day dust and such. If you take a closer look at the video. You can see the lens was ok, then he cleaned it and it looked smudged. Also with the wires, I would suggest using a RTV to seal the holes that are now exposing the clean cluster. Other than all that, good job my guy 😁

Great tutorial! Might add automatic transmission requires slightly different gauge configuration.

Would love this for my 2002 Honda Civic LX but can’t find any that work with my gauge cluster

Hell yeah man this is so helpful

Nice tutorial. Is there a way to light up/illuminate the needles better?

Nice job and great yt tutorial

What double sided tape did you use to stick the dongle into your dash? I can't get anything to stick to my dashboard.

great vid man, thanks!

Very good video, just one question, it serves for a honda civic lx mod 96, thank you very much.

What are the wires coming from the faces used for (I know they hook up to the controller) but is there a way I can still use the faces and they look normally light up like at 19:30 without the controller and with LED lights behind? Like can I cut off the wires to the faces and they still look normal or do I have to have to controller hooked up with it to turn it on and off?

Still helpful today!

Is this the same wiring for an 2001 acura tl?

Can I use the electricity meter to run .. Put red and black in any lamp

How do u know ifs a 12v with a multimeter do u need to have thr car on position

Just curious but does the maintenance requirement light go out once you actually start the car or was yours already on?

Did you add T5 LED’s in all the brown plugs?

Nice... My next project

What if i dont have the dimmer switch? My EK doesnt come with such a controller from factory? Where do I connect the gauge faces?

Would you be able to wire it directly to the fuse box with a fuse adapter?

great video, installed today they look great, if anyone else is looking to do this it doesn't really matter if you put leds in all of the old bulbs, you really only need them behind the odometer and in the ones that shine down onto the cluster

Did you switch the positions for the red wires ?

Hi! What is the distance between the screw holes? 34 or 30mm?

Where can I buy these for a 2020+ Toyota Camry Hybrid XSE?

I install only one,,just wondering is that effect?because my turn signal wont work.im just new here.

Do we have to cut into the wires or can we just leave it as is cause i dont wanna fuck anything up on my car??

Nice man !

Hello does it mount on a Honda ek 3 ? And where I can buy those Thanks 🙏🏻

Bro the link you have for this one is not working, can you give me a link for one like your one.

My civic is an LX 4 door, will this fit mine?

is there a blue color version for this????

What color led did you use? If you mentioned it in the video I did not hear it.

Con que nombre lo compraste? No encuentro en ebay

Is not longer avalible. Where can I get one of that?

someone knows if its hard to remove again ?

Hello when i see your dashboard from behind it have some spots without bulbs.Are they missing or it is like that stock?

WHAT type of switch below the left a/c vent

my cluster has a plastic cover over the lights for the temperature and fuel gauges. i have no clue how to get that thing off.

So, I understand they are overlays. But, could you actually remove the older gauge faces and use these, so you don't have the possibility of ghosting? This would make them brighter, as well, right?

me podrias enviar el enlace directo? para comprarlo

could you tell me where you bought them, what's their name?

i love it

same question, why leave the old ones under?

I’m still very confused on what you did with the wires. Could you explain what you did ?

Do you take out the light bulbs from stock? I'm doing a glow cluster right now.

How do you know what size LED bulbs you need for behind the dash?

Do they make it for Renault Duster ?

Hello, I'm from Peru, a question where I can buy it please

how about a video tutorial in changing light bulbs color?..

Where can i get a kit

Dope af

What’s the website for those gauges I want to replace my stock ones with some of those can’t find them on the Internet

Lit AF

I see you have 228 000 miles. Any engine upgrade like transmission, engine etc... Also has your rpm guage ever became broken meaning needed be replaced?

Nice!!! I'm having a hard time finding that for My Si !(mexican ,in KM and 9000 rpm

Why did you leave the old gauge faces on?

👏👏👏

that is so cool, where can i get those?

Hi does the inverter connected to faceplates make a whining noise?

How to buy this item sir

Could you tell me from where you bought them

In Amazon which is the name of those gauges?

Hello...Where I can find used speedometer ?

Donde venden

You didn't install "gauges". You applied overlays to their face plates.

That looks sick. This would fit a 00 civic ex coupe right

What’s a good link for those faces ??

Dam wanted to see how. u spliced it

hello thanks for the video. where can we buy them from ,and what to search on ?

I have a 97 hx what is the difference ?

What's the item number for the one you bought?

Es compatible para el honda civic del 95

Got the same ones mine don’t glow tho

Donde.lo.compraste

I just installed this but my middle one is not lighting up ? Could it be my wiring ? So frustrated lol

Where I can buy the LEDs

Where can i get this?

Why didnt he remove the originals

Cut farther back from the plug. Not so hard

You should sell some

Your car has 228K actual miles?

Triggered you didn’t take the old ones out

You do know the old gauge faces are supposed to come off first

Shame only goes up to 120mph my Ej8 goes up 145mph.