Тёмный

96-03 chevy S10/Blazer steering box removal GMC Jimmy/Sonoma 

Lott of Garage
Подписаться 39
Просмотров 20 тыс.
50% 1

Removing a steering box from a 02 4wd chevy S10

Хобби

Опубликовано:

 

28 дек 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 12   
@johnplato4976
@johnplato4976 Год назад
Thanks for the video on removing the steering box. I do have a question though. Since my pitman arm is loose on the steering link, would it be easier if I remove the pitman arm still bolted to the steering box?
@masonwang1495
@masonwang1495 Год назад
thanks that was the most straight forward removal here, did you leave the pitman arms attached to the link? no jack stands?
@getminesallday24
@getminesallday24 2 года назад
Does the pitman arm have a key groove or does it just go back in any way I can get it back on with out affecting the steering wheel
@hectorjerez2614
@hectorjerez2614 11 месяцев назад
Gracias gracias gracias
@michaelstrother9588
@michaelstrother9588 Год назад
What did you use to pry the pitman arm off
@tryduck5571
@tryduck5571 Год назад
When a shop basically tells ya you have to replace everything in frontend , ya may want to find a new frontend repair shop.This is like a shop that tells ya they had to replace your battery , battery cables , starter and alternator to fix a charging issue replace basically everything in the charge start system.Thats guessing and part swapping instead of really figuring out what is the real culprit that is causing problem.Maybe its just to drive up repair costs but the likely hood everything in frontend is bad all way to include the steering gearbox to the control arms and tie rods, is very very very rare unless you just never maintain or service your vehicles until everything is worn out.the steering box can be adjusted to remove some play and usually is not replaced.Just hear how customers say oh everything had to be replaced to fix a problem that required really only one worn part was causing.If you Don't maintain your vehicles and abuse them yea i can see the complete frontend steering system needed all replaced but this is very very very unlikely it all needs replaced to fix a steering issue.IMO this is only done to boost repair costs or done only when rebuilding a entire vehicle.Likely this needed a minor steering box adjustment to tighten up steering and a idler arm then a alignment unless this is like i stated a abused or poorly maintained vehicle.
@FirebirdRestores
@FirebirdRestores 2 года назад
Will you need an alignment after replacing this gear box?
@Lott248
@Lott248 2 года назад
For sure, anytime you replace any front end component you should get it aligned. If you care about your tires anyways.
@feicai8508
@feicai8508 Год назад
you said " old to chevy s10",correct?i guess its you assume its old car
@oscarmosca1234
@oscarmosca1234 Год назад
straight to the point.
@adam102090
@adam102090 Год назад
Forgot to mention that you want to lock your steering wheel.
@tryduck5571
@tryduck5571 Год назад
Yep or you will be replacing a clock spring if it gets turned.
Далее
Вопрос Ребром - Субо
49:41
Просмотров 1,6 млн
Meninas na academia
00:11
Просмотров 2 млн
Which generation of S10 is better and right for you?
14:00
How to properly adjust a GM/Saginaw steering box
9:38
Просмотров 113 тыс.
Should you adjust or replace your steering box
3:19
Просмотров 14 тыс.
Chevy Blazer Spark Plug Replacement!
5:58
Просмотров 102 тыс.
CHEVY S10 - Everything You Need to Know | Up to Speed
13:21
28 июля 2024 г.
0:20
Просмотров 5 млн