A/C AC air compressor washers inserts automotive application R4 older Chevy Truck Car

Подписаться 6 тыс.

Просмотров 15 тыс.

50% 1

Make sure you click the Thanks button if this video helped you.
. See this playlist for more about this project • Air Conditioning Repai...
More Info on how to install an R4 style automotive AC Delco GM Chevy Chevrolet HVAC AC A/C air conditioning compressor, including the washers and inserts. I am no expert. This is just what i learned from a couple of weeks of googling and whatnot. And I found so little info on RU-vid or online. That is why I made this video. Hopefully it will help someone. Post questions below. But like I said, I'm no expert. I just did this one huge project alone... lol
See more videos about this truck • Chevrolet Chevy C1500 ...
Where to buy
Sealing washer kit on Amazon amzn.to/3yiYHTt
Vacuum system kit amzn.to/33Rowfk
R4 Compressor Sealing Washer Set and Inserts amzn.to/3kCwlLF
Nylog Blue amzn.to/3iwjCZb
A/C Power Clean & Flush amzn.to/30Nx6Kd
90-Degree Circlip Pliers amzn.to/2Ci1jHJ
AC Delco Refrigerant Oil amzn.to/2XR6oOS
AC Delco Orifice Tube (make sure this is correct for your application) amzn.to/2DZsZl5
Universal AC System O-Ring Kit amzn.to/33RbL4k
@horsepowerhouse on Facebook
@rdavidharrisjr on Facebook
Facebook / horsepowerhouse
Facebook / motocrossacademy
Facebook / rdavidharrisjr
eBay www.ebay.com/s...
Amazon www.amazon.com...
Twitter / horsepowerhouse
Instagram / horsepowerhouse0
-BikerDave

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@itsjeremy6995 Год назад

Where and how do I add the oil into the compressor I have an 87 Camaro

@HorsepowerHouse20 Год назад

See my playlist with more about this project ru-vid.com/group/PL_5XjPVEw3swRL4ED9AhsynAgZsuXDzZm

@itsjeremy6995 Год назад

@@HorsepowerHouse20 I hooked up everything but it’s only holding at 18 inches of mercury

@HorsepowerHouse20 Год назад

Well you obviously have a leak to investigate

@frankgonz31 2 месяца назад

Into the low side from a pressurized can of oil,or simply put into a vacuum and then use the gauge hose and in it goes.

@frankgonz31 2 месяца назад

I know it's annoying, why not make it flat

@snuffdipper6611 Год назад

That’s why mine is leaking. I didn’t use the insert in the line. Just ordered the kit when it gets here I’ll remove line install small insert put new sealing washers and should fix my problem. Thanks for the videos you’re why I found my problem 👍🏻

@mikeymerrett Год назад

We’re you able to order the insert? My compressor didn’t come with one all though it is pictured with it on the parts website

@jackaragg 6 месяцев назад

Why does just one side get the insert .... and not both sides? What is the purpose of the insert ?

@HorsepowerHouse20 6 месяцев назад

Keeping it from leaking is the reason. see my videos.

@danolsen77 3 года назад

Ran into this special seal issue... this video made sense of it...thanks

@HorsepowerHouse20 3 года назад

None else has has information like this. We searched for weeks and found nothing.

@HorsepowerHouse20 3 года назад

More videos about this project here ru-vid.com/group/PL_5XjPVEw3swRL4ED9AhsynAgZsuXDzZm

@duganfr 3 года назад

Getting ready to replace the setup on my 88 k2500. Looking for common issues before I start the job

@HorsepowerHouse20 3 года назад

I would say you have enough videos here about all of it. More than anyone on RU-vid.

@franciscovaldez5072 Год назад

Running into the same problem. What part number did you use for the spacer? Please help!

@HorsepowerHouse20 Год назад

Watch the videos here. You will learn alot about this process. ru-vid.com/group/PL_5XjPVEw3swRL4ED9AhsynAgZsuXDzZm

@enermaxstephens1051 Год назад

@@HorsepowerHouse20 Is it still blowing cold 2 years later? Or did the system develop leaks?

@HorsepowerHouse20 Год назад

impossible to start leaking all of a sudden since it was installed correctly.

@frankgonz31 2 месяца назад

I don't know why they can't just built it plain flat,instead they cut it slanted and you have guess from a million ways to seal it. Im also having this problem, can't even find the freaking washers have to guess from Amazon

@HorsepowerHouse20 2 месяца назад

the instructions are pretty clear, but not the easiest to understand. as you see in the video. but if you follow them precisely, it will help you sort out which sealing washer etc. and the reason they do it in a step style, so they can apply this part to many other makes and models. which is still ridiculous. it is important not to over tighten the bolt over the ceiling washers and the block. use a torque wrench as stated in the video.