A complicated 1980's kit to build a whole vocoder! POWERTRAN ETI VOCODER

Подписаться 639 тыс.

Просмотров 50 тыс.

50% 1

THE ETI POWERTRAN VOCODER
if you'd like to see more videos on this project/livestreams and more
support here :- / lookmumnocomputer
or you can use the super thanks button below the video!
it also makes ‪@THISMUSEUMISNOTOBSOLETE‬ get bigger and better. :)
-------
download sounds from this synth to use, here :-
/ powertran-first-85674802
/ more-powertran-85727517
/ more-museum-and-85835577
-------
SEPTEMBER 1980 ETI :-
worldradiohistory.com/UK/Elec...
-------
DIGISOUND 80 video • A DIY Synthesizer You ...
-------
List of Gear/Electronics I USE :-
www.lookmumnocomputer.com/stu...
--------
THANKUS HUMUNGOUSO to :-
Markku Rontu
TheTechromancer
Darren Mackay
DeltaByte
Steve Jones
Paul F
Cameron Luteraan
Ryan Holtz
CrazyRocketGuy
Ande Spenser
Arnix T-Bone
Vaz Daqui
Dai Stanton
Eric Painter
Jason Kuehl
Aaron Ritter
Mark Flanagan
David Boudreau
Claudio
Daddy_Fabianskii
Roland G. McIntosh
Broc
jd
Invalid Number
casey
Scott Armstrong
CoFFeeTaBLesE
Joe Pino
Matthew W
David Dolphin
Matt Followell (PDP-7)
Miles Flavel
-------------
if you want to donate to the electronic component fund! Paypal :-
www.paypal.me/lookmumnocomputer
-------------
SPOTIFY :- bit.ly/LMNCSpotify
Facebook :- / lookmumnocomputer
Website :- www.lookmumnocomputer.com
Instagram :- / lookmumnocomputer
#repair #synthesizer #history

Наука

Опубликовано:

27 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 250

@officedurapquebecois486 11 месяцев назад

The drum machine + poly synth combo was glorious

@curtishoffmann6956 11 месяцев назад

I want more of the toilet roll song! It's sounds really flush!

@cleverhardy5230 11 месяцев назад

Sounds flush! 🤣🤣🤣

@emdotambient 11 месяцев назад

Vocoders are so awesome, but they are rarely used to full advantage. Everyone immediately goes for the robot voice thing, which is cool and all, but hardly the most creative use of these devices. It's kind of like using a sampler to only play songs using a dog barking or something. You can get more interesting results when you start running guitars or anything other than a voice through them. I remember my music collaborator and I using a PAIA vocoder in the early 90s where we used a guitar as the carrier, and a sequence from an Ensoniq EPS as the modulator. It turned the guitar into an otherworldly gurgling, bubbling water sound.

@VarionJimmy 11 месяцев назад

Totally agree. 👍👍👍 I was honestly a bit surprised when I noticed that most people thought that putting drums, guitar, etc thru it was a new thing. I’ve always had two things I tell people who just started and wants new inspiring gears: Get a reverb/echo. And get a vocoder. -And experiment!

@donerskine7935 11 месяцев назад

Richard Becker and his wife owned Powertran. Elektor magazine also published a Vocoder design.

@timesquare5473 11 месяцев назад

Indeed; I worked for them for 3 months.

@professornuke7562 11 месяцев назад

Good old ETI. I built several kits. I built the ETI 480 50watt amplifier as my first guitar amp, and a little 5watt one as a practice amp. Used it for years.

@tcpnetworks 10 месяцев назад

I built the ETI 499 amplifier - and I also built the Electronics Australia Playmaster 3. I ended up with 4 of them in a surround sound setup. They were all good.

@dfxmonkeyhead 11 месяцев назад

I built the Paia vocoder... sitting on a rack in my garage gathering dust. I should go rescue it and see if it still works - it actually never worked all that well; I remember being slightly disappointed after I finished it - it didn't perform as well as I had dreamed. The ETI sounds like I wanted the Paia to sound.

@IanSlothieRolfe 11 месяцев назад

While it was an expensive project back in 1980 (£175 in 1980 is about £1000 today!) I had a friend who played keyboards and other electronic instruments and he had had it demoed to him at a show and thought it was a bargain, a commercial instrument of similar quality would be 3 or 4 times that. Powertran produced some amazing products, I only wish I had the money and skill at the time to build one or two of them!

@skyrocketautomotive670 11 месяцев назад

If that was a Georgio Moroder impression at 10:55 you nailed it my friend 😅 What an awesome and versatile machine!!

@pheotus 11 месяцев назад

Man I wish there was a diy kit made today of this.

@neeneko 11 месяцев назад

yeah, as much as I love all the FPGA and SoC systems we have today and the projects people build off them, I kinda miss this style of kit. tindie has some, but what I wouldn't give for someone to reboot the old heathkit kits or stuff like this.

@GizzyDillespee 11 месяцев назад

There's somebody from Kazakhstan, on MW forum, who's selling unpopulated PCBs to make a clone of an old German (I think) vocoder... there are projects like that, but I don't know of an affordable convenient kit?

@MattOGormanSmith 11 месяцев назад

Julian Ilett built a copy of this a few years ago. You can still get all the components and have the PCBs made, ru-vid.com/group/PLjzGSu1yGFjXKZ5igKxwlgfGdy25yZoPN

@VarionJimmy 11 месяцев назад

Yes please 😁 I saw the responses. To bad that RU-vid doesn’t allow links…

@fluke196c 11 месяцев назад

@@GizzyDillespee What is the MW forum? Can you drop some links here so I can find what you're referring to?

@headfirstonly Месяц назад

Watched this entire video with a huge grin on my face. Brilliant!

@dfxmonkeyhead 11 месяцев назад

Love the 70's fro and stache. You were really, groovin', man. Right on! Solid and outta site!

@NONFamers 11 месяцев назад

I read the first article on the ETI vocoder and desperately wanted to build one. However, I had several things working against me. Firstly, I was still at school at the time with only my allowances to save up from. Secondly, I lived (and still live) in Denmark, and electronic components were hard to come by. Thirdly, I never got my hands on the issue holding the second article in the series, and when I finally managed to track down a copy of it, ETI had gone out of business! However, I did learn a lot about the inner workings of a vocoder by studying that article. Thanks for sharing this!

@markedis5902 11 месяцев назад

I miss the electronics magazines. Used to waste a lot of time drooling over the adverts.

@i_never_asked_for_an_alias 11 месяцев назад

Love your enthusiasm in everything you do.Big love my good Sir.

@miahsbrokengarage 11 месяцев назад

Amazing. I don't do synths, or vocoders, and I'm terrible on my guitar (though I still like to pluck the strings). But I love your channel. The energy you put into these videos and knowledge you drop is just perfection. Thank you!

@wideyxyz2271 11 месяцев назад

Dude it doesn't matter how good you are as long as you have fun and enjoy doing it keep on keeping on!

@Hoptronics 11 месяцев назад

I don't play anything.. I love music and electronics so I've been working on a project for my friends.

@Kaminskip 11 месяцев назад

That sounds awesome with the drum machine running though it!

@MrGlenfraser 11 месяцев назад

I used to talk to his brother John Becker about this back in 2003 when I worked at Essex Radio in charge of Engineering. John used to live in Kent at the time but travel down to another electronics magazine.... This was a great product and later In the 1980's they issued I am sure some mods to that project with values etc...... I will try to visit your musium one day as when I left school in 1981 I worked on ZX81's BBC Micros and a host of other computers repairing them as my first job....and at Amstrad.

@padders1068 11 месяцев назад

Sam! Brilliant and hilarious as ever! Keep up the good work mate! 🙂

@mikethetexan76 11 месяцев назад

I really appreciate the synth patch walkthrough on the Furby machine.

@macronencer 11 месяцев назад

That trip through the magazine was a nostalgia fix! My grandad had a ZX80, and he also built the Maplin organ, which I remember playing when I visited. My first job after leaving uni was actually in Maplin Electronics in Southampton as well :) I spent a couple of years there before starting a career in software. It was quite instructive, and my staff discount was handy for getting and building kits now and then too.

@gnarlysoundscapes7210 11 месяцев назад

That last jam vocoding the bassline was badass. You should build a whole song around that.

@davidmarshall5665 11 месяцев назад

I love seeing all these old synths and the building processes but I’ve never wanted any of them like I’ve wanted this vocoder❤️❤️

@tomahzo 11 месяцев назад

Your seventies twin DEFINITELY needs more screen time :D.

@ScorobeSlavinpoop 11 месяцев назад

This is my favorite way to start my day! Thanks for the new video!

@Super8Rescue 11 месяцев назад

I have always wanted a vocoder. Kenny Everett was the Genius when it came to vocoders. He sung my name jingles for radio with a vocoder back in the 70's Plug a keyboard in to it to play chords with the vocal.

@professornuke7562 11 месяцев назад

He'd sing whole choirs with them, and use video feedback as well when he made it to the telly. But never forget the BBC radiophonic workshop. EXTERMINATE!!!!

@infn8loopmusic 11 месяцев назад

@10:00 putting drums through a vocoder 🤔😲 not sure why I never thought of that. I've been trying to build more musical / but percussive drum sounds. That's exactly what I need!

@classicaudioadventures 11 месяцев назад

That actually sounds amazing.

@adzy31 11 месяцев назад

I love how much fun you clearly had making this video. Couldn't stop chuckling

@daf666 11 месяцев назад

I dunno how you knew I wasn't deserving of all those bog rolls, but you nailed it.

@jochenstacker7448 11 месяцев назад

10:43 channeling Giorgio Moroder, I LOVE it!😅 Sam, you are a treasure.

@dcallan812 11 месяцев назад

Neal Armstrong was a big synthesiser user, he loved the echo you got in space, apparently it was out of this world (echo in a vacuum🤣😂) Interesting vocoder 2x👍

@mediaphile 11 месяцев назад

In space, no one can hear you scream...

@wideyxyz2271 11 месяцев назад

@@mediaphile In the Nevada desert at night with a synthesiser you can pretend you are on the moon!

@MattOGormanSmith 11 месяцев назад

His nightclub was awful though,. No atmosphere.

@undereeries 11 месяцев назад

dude vocoders are SICK AND THIS IS COOL ANDTHANKS

@infn8loopmusic 11 месяцев назад

@8:09 that classic basic basic vocoder noise. Very cool just by itself. 🔥

@Crackalacking_Z 11 месяцев назад

I really enjoyed the impromptu jams XD

@StooCambridgeArtist 11 месяцев назад

Since watching BattleStar Galactica in the late 70s I wanted a vocoder. The sound of the Cylons - Awesome! They were used so much during those early years, defined a lot of music of the day. Love it! Vocoder'tastic!

@littlebacchus216 11 месяцев назад

And cheaper than the ARP 2500 synthesizer they used.

@helpermonkey6641 11 месяцев назад

Battlestar Galactica. I thought the same thing.

@makers_lab 11 месяцев назад

C;lassic kit and lots of memories in those mags. We built a comp80 at school, and I had fun secretly patching CP/M to behave a little differently, ZX80 kit as my first computer, and was really keen on the transcendent 2000. Still got an original demo tape for it somewhere.

@cpm1003 11 месяцев назад

I love this thing! So did one of my favorite bands, ELO. 🎶Mister Blue Sky! 🎶

@Barnaclebeard 11 месяцев назад

Gorgeous typesetting in that magazine. We used to do it up nice.

@joyboricua3721 7 месяцев назад

Sounds wicked! Kudos

@genghisbunny 11 месяцев назад

That was really cool. Thanks for sharing it!

@jusch5937 11 месяцев назад

omg you build the vocoder julian ilett is buildung for what feels like 10 years

@midimagic7097 11 месяцев назад

Well done. A great demo of the Vocoder. Sounds like you had great fun playing with it.

@michelvondenhoff9673 11 месяцев назад

Awesome, never heard of this one.

@robertkielty5094 11 месяцев назад

The RU-vid caption generator as a vocoder decoder was un-phased up until the load of Toilet Roll Mumbo Jumbo Song.

@AileTheAlien 11 месяцев назад

Thanks so much for going into the theory of how these things work! Very interesting! 🎤

@PaulTheSkeptic 11 месяцев назад

I want my voice to sound like this all the time. I wonder if I can have one surgically installed. Then instead of speaking normally, when people say "Some weather we're having eh?" I can say things like "Atmospheric conditions are adequate to maintain peak performance on all my systems.". Or "This food is good." "Thank you for the information fellow human. I also intake dead bio matter in a disgusting process of digestion instead of more efficiently recharging like a higher life form would."

@wideyxyz2271 11 месяцев назад

What a cracking bit of kit. My vocoder is part of my DAW and I dont use it much but I will have a play around with it. A stand alone one would be very cool. Actually thinking about it I do have a Behringer vocoder somewhere in the shed. I will have to dig it out!

@MrMargaretScratcher 11 месяцев назад

I like the 4 little circuit diagram dudes hanging out at 4:32 :ø

@teaurn 11 месяцев назад

Ooh, getting Astro Blaster vibes from parts of this! "Alert, Alert. Invader in Sector 1, Player 1 to battle stations!" God, I'm old... 😁

@ANTHONYBOOTH 11 месяцев назад

yeah, - using a drum machine to modulate the amplitude of whatever synth; - that's one part of the current scene in reason studios (OBJEKT) ...I like my virtual instruments but also value real ones as I don't like to fire up an entire DAW desk just for relatively petty things... - those boards look easy enough to assemble = I would just get my boards made by PCBWAY etc ...I did plenty of pcb making and even built a Z-80 computer test jig there at THANET... = be careful what legged birds you invite back to your flat, - you can be back on the road with nothing in NO TIME!!!

@suitandtieguy 11 месяцев назад

I really like how Powertran used the KLF font. hadn't noticed that until now and as a synth nerd who is obsessed with the KLF I'm rather disappointed in myself.

@dedicatedspuddler7641 11 месяцев назад

Very cool piece of kit and history.

@silaswallflower8938 11 месяцев назад

I loved ETI - was fascinated by the Vocoder but could never afford to build it (not that I have any musical talent to use it with!). It was an interesting to compare the design of this vocoder with the Elektor vocoder which came out earlier the same year but which had fewer channels.

@Doctormix 11 месяцев назад

😍

@falangistavaleroso9689 11 месяцев назад

I sold mine 8 years ago, great sounding processor

@newtronix 11 месяцев назад

Wow it's quite versatile. I want one!

@stubrakon9683 11 месяцев назад

Brilliant video cheers 👍😃😎🤘

@HOLLASOUNDS 11 месяцев назад

6:45 Cat was laying relaxed but is now looking at Me in confusion looking like He is thinking "What the fxxx is that sound?".

@3D6Space 11 месяцев назад

I love the giant turny knobs, straight out of some Frankenstein movie or Batman computer.

@R3TR0R4V3 11 месяцев назад

Pretty rad 😎

@BillHustonPodcast 11 месяцев назад

Man, that thing sounds great! I built a PAIA vocoder when I was a kid, and I never could make it sound good. The filters really kind of sucked, IMHO. Needs a sharper Q? Or more stages? Dunno what the secret is. I also tried building one in Pure Data, and could never get that Phat Sound!

@edmx 11 месяцев назад

Wow that is really good. Sounds as good as the EMS!

@whiggy6976 11 месяцев назад

I remember seeing this, I had the magazines for the PA stuff but could never afford their kits, their synths were awesome

@catandtheostrich 11 месяцев назад

By your command, imperious leader!

@xXd3m0lXx 11 месяцев назад

Cool Dalek voice🪠

@mikrikbell 11 месяцев назад

Hitting my ears like Intergalactic by The Beastie Boys

@mattbba8451 11 месяцев назад

Funkin' Awesome.

@deankdx 11 месяцев назад

This episode was freaking awesome! Need more vocoder music :)

@Nobe_Oddy 11 месяцев назад

I just had a VOCASIM!!!!!! OMG!!! You just brought back so great memories.... but you REALLY TICKLED MY PICKLE with that vocoded b-line!!! - You BETTER make a dope ass track with that and POST IT ON YT!!! HAHA!!!! LUV YA M8!!!!!

@t55a2 11 месяцев назад

That Digital Delay looks decent

@EdEditz 11 месяцев назад

That sounds amazing! Very Battlestar Galactica Cylons ^___^ (Well they used an EMS 1000 for that so no wonder it sounds very close). I think the 14 or 16 band Vocoders sound the best. I love these things. That patch at 16:00 sounded awesome too! Very Daft Punk I thought. ^^

@Alkatross 11 месяцев назад

This is the best sounding vocoder I have ever heard. The digital vocoder plugins don't sound nearly as dirty/grungy as this one.

@BatteryCoverMissing 11 месяцев назад

You just need to run a dirtier carrier signal into them. Should get you into the ballpark more?

@Alkatross 11 месяцев назад

@@BatteryCoverMissing yeah, it sounds distorted at both ends. Really unique

@mmcc8657 11 месяцев назад

Thanks

@phoenixx5092 11 месяцев назад

nowhere near your level but i found running a mic into an overdrive pedal allowed me to use my voice for heavy metal sounding power chords. That was kinda cool so i got a bowie stylaphone and a gen x1 stylaphone and a few mic input splitters then plugged them all in together in series, then got some ever more interesting cool sounds as the input splitter let me plug a guitar in too.. and the x1 allowed you to feed audio into it too which it was able to do synth things too. Thats probably the functions of two of your basic modules and you have walls of hundreds of them. You must have fun making wierd sounds

@arekpocicki5681 11 месяцев назад

Sam nice documentacion

@AdrianHiggins83 11 месяцев назад

Hope to see you in bgt

@chrislee1701 11 месяцев назад

Die Stimme der Energie!

@buffplums 11 месяцев назад

Going to build one of these from scratch …

@jameshamaker9321 10 месяцев назад

brilliant.

@jamesh5460 11 месяцев назад

Cool! Has a KMFDM vibe to the voice. Awesome! Also makes me think Beastie Boys as well.

@DAVIDGREGORYKERR 3 месяца назад

There is a guy in the IOM that likes to do this sort of thing as well as solar electronics.

@riusma. 10 месяцев назад

Thanks.

@JK-of8tb 11 месяцев назад

16:35 when you're calling tech support but you are on hold for an hour

@andreasbauer6652 11 месяцев назад

neat sound! 😂❤

@erik-janvanoosten1450 11 месяцев назад

you basically made an early Boys Noize track there in the end :P great work!

@weapea 11 месяцев назад

You should have seen my cats react when he hears that voco-delay The first time 😳😂

@danhat606 11 месяцев назад

Diggin' the 80's dress up----Although you look like one of the Scousers off Harry Enfields show lolololo!

@russellwaite5874 11 месяцев назад

I really enjoyed this one ! Just past 14 minutes I thought you were about to go into DALEK mode. :-) I remember them when they first came out, ( black and white ). While I'm here, Just wondered if you'd had time to do a bit of tuning on the organ ? ps, I still play around with my old Echoman EM150 analogue echo unit, good fun. Take care and keep it up

@pswanberg1 11 месяцев назад

someone get this man a level and stable table.

@jenshoffmannolsen 11 месяцев назад

why?

@ChrisHopkinsBass 11 месяцев назад

3:00 The Smash Aliens called - they want their colleague back!

@timsgaf 11 месяцев назад

its a cybotron from battlestar galactica. all us oldies know that. really cool.

@jochenstacker7448 11 месяцев назад

YOU HAVE A VOCODER, HOLY SHIT!

@kenho4ba 11 месяцев назад

The Buchla module 296t is coming to eurorack from Tiptop soon and i have seen others (even a kit version, bt i cannot now remember the manufacturer), so if someone likes this vocoder and cannot get this particular one, those are an alternative.