Тёмный

A Mondeo water leak, and removing the rear wiper arm & grommet 

Craig's DIY Car
Подписаться 39 тыс.
Просмотров 6 тыс.
50% 1

Tracking down and sealing a water leak on the Mondeo, and removing/replacing the rear windscreen wiper arm and its grommet.
You will need:
* Silicone sealant. Amazon links ~
US: amzn.to/2wblMp2 | UK: amzn.to/2eYIYU5
* Rubbing alcohol
* 13 mm socket & ratchet.
* Tissue paper.

Авто/Мото

Опубликовано:

 

16 дек 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 16   
@CraigsDIY
@CraigsDIY Год назад
Silicone sealant Amazon links ~ US: amzn.to/2wblMp2 | UK: amzn.to/2eYIYU5
@matusjass9487
@matusjass9487 Год назад
hello craig. I have some issues with same mondeo as you have. would you find some time to hear me and maybe help ? Thanks
@mortas72
@mortas72 Год назад
As usual, solid work and efficient execution, with such a service for this Mondeo, we will have videos very rarely!
@SwoonGaming
@SwoonGaming Год назад
I don't even have a Mondeo, but your videos are really eye-catching so I end up watching anyways.. :)
@therealdojj
@therealdojj Год назад
Keep us updated with the progress please The other area which is very common for Easter leaks is the little connection on the washer hose as it goes through the hinges in the boot, the connector pops off and the first thing you notice is no water from the rear jet and then suddenly a deluge in the headlining
@adamkocsis5769
@adamkocsis5769 Год назад
Also noticed this issue a while ago! Thanks for the video, will give this fix a try.
@garydevlin8158
@garydevlin8158 Год назад
Seasons greetings to you Craig from Mondeo Edge (aged 16)
@simon_1987
@simon_1987 7 месяцев назад
So that's how the jack is suppose to go! Mine was in the cutout on the right and the boot linear never sat flush
@CheapBastard1988
@CheapBastard1988 9 месяцев назад
Have you ever replaced the windshield wiper mechanism on the Mondeo? I've done the one on my 2001 mk3 Mondeo, and it was an absolute pain to find. The ones for the 2001-2003 model are different from the 2004-2007 models. New, they were only available at the Ford dealership, and they wanted €500 not including 21% tax! Then I went to the scrapyard and there was only one compatible car there. And it was about 6th in line for the crusher. I'm glad I could find one, but removing the wiper arms seemed impossible. Everything was completely corroded stuck. So, I removed the mechanism, arms, plastic cover, motor, and wiper blades as a whole. On the bright side, I only had to pay €40 for everything. Now I at least have a spare motor and an extra pair of blades.
@jamesb15uk
@jamesb15uk Год назад
Nice video. Very similar to leak on my mk5 mondeo. I suspect wiper grommit also. Fuse actually blown for the wiper motor. Small tip for removing the wiper blade, fold it all the way up so it's vertical, you can then just use the lever to lift it off with no resistance.
@MarksThinkTank
@MarksThinkTank Год назад
Well done as always!
@slimjim1125
@slimjim1125 Год назад
Hi Craig, great info on your Mondeo with all of your videos. Where do you usually purchase your replacement parts from currently? Since a lot of parts are becoming unavailable due to this model becoming older. I've tried Amazon, and some places on Ebay. I refuse to pay the inflated prices at any Ford dealer, and I've found that they'er usually not much help anyway if they can't spend more than two seconds finding it in their computer system.
@CraigsDIY
@CraigsDIY Год назад
Take your pick of wreckers; online at places like Trodo.com, RockAuto.com (US but believe it or not Mondeo Mk3 was in Mexico so it's on there), careful of LHD parts, if for the motor sometimes a Focus or other part will work; Ford dealer or other genuine parts suppliers as last resort.
@jakobmsattler
@jakobmsattler Год назад
Hi do you know what might be the problem with my mondeo mk3? Sometimes the engines rpm "jumps" up and down, and when I out a tester on it it says that there is a problem with the fuel adjustment percentage(when the rpm isn't working properly) I have already change the map sensor and the idle air control valve and the pcv tube behind the intake manifold
@jakobmsattler
@jakobmsattler Год назад
It has driven about 150.000 miles
@CraigsDIY
@CraigsDIY Год назад
Be more specific than "fuel adj %"? Anyway it could be anything, you will have to work through a process of elimination. Air and fuel. Also check throttle position sensor, and upstream O2 sensor.
Далее
Replace the Rear Wiper Arm: HOW TO ESCAPE
5:23
Просмотров 605 тыс.
The Secret of Cleaning Car Windows Without Streaks
11:13
Ford Fiesta -I fixed a water leak - Mk7 09-17
4:30
Просмотров 29 тыс.
Ford Mondeo Mk4 - Boot leak fix
18:08
Просмотров 12 тыс.
hot to remove a 2012 Ford Mondeo back bumper...
4:22
mondeo mk3 pollen filter change and water leak fixed!
7:36
Сравнил два перфоратора🤯
0:29
Every car need this.#car #carhack #shortsyoutube
1:00