A quick rust treatment on my Jaguar XK8 wheel arch. Using Bilt Hamber Hydrate 80

Подписаться 25 тыс.

Просмотров 6 тыс.

50% 1

Just a quick vid of a little bit of preventative maintainance in front wheel arch of my 1996 Jaguar X100 XK8. This is not sponsored. I buy and use these products because i like the way they work.
A link to Bilt Hamber Hydrate 80
amzn.to/47ROI8g
A Link to Hamerite stone chip shield
amzn.to/3EfpItP
Please subscribe and click the notification bell. If you wish to support our channel, why not buy a sticker or other item of our merchandise. This link takes you to the 'To the Garage' shop. www.tothegarage.co.uk/shop
“When you click on some of the links provided in this description, or on the website, and then decide to go on and make a purchase, this can result in this channel earning a small commission when you make qualifying purchases. Programs and affiliations include, but are not limited to, the "eBay Partner Network.” and the "Amazon affiliate network" Using these links does not increase the price that you pay in any way.
Thank you for supporting To the Garage.”
Intro, Outro and bed, theme music were written by Craig Blundell. They are his copyright and provided to ‘To the Garage’ for its exclusive use. They may not be copied or used outside of ‘To the Garage’ RU-vid channel without his written permission.

Авто/Мото

Опубликовано:

29 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@olddavid4 10 месяцев назад

You could post vids of touch-up paint drying and I would watch. I'd think you have finally gone off your nut, but my subscription would stand. Thanks for keeping my eye on the project. My '97 thanks you too.

@UdoIBress 10 месяцев назад

Very good job John. It is always a good idea to stop or eliminate rust immediately. Any repair under the car should be looked around and rust removed . Greetings Udo

@jamesward5721 10 месяцев назад

Wurth do the same stuff ready-mixed in a plastic jar. I use it every day & like it. Idea with this stuff is to be stingy - apply just enough but don't have the surface soaked in it - if you lash it on, you'll get it hard to get paint etc to adhere well as it won't have reacted fully. Mingy as she goes & it works good.

@jonathanslade2358 10 месяцев назад

Proper job!

@EssexSilvering 9 месяцев назад

I've just bought an XJR 2001 and it has lots of surface rust, thick as well, especially on the A Frame so tomorrow I will be hitting it off with a small hammer, then using wire brush on my angle grinder to clean the rest off, then applying this rust eater that your using here. This car I got from Yorkshire, Bradford, and I bet it's been sitting in a puddle or grass for years! I hate the look of rust under my cars! Great video by the way, keep up the good work.

@ToTheGarage 9 месяцев назад

Thanks Dave and good luck with your project👍

@garymorris801 10 месяцев назад

Fab mate

@buffi944 10 месяцев назад

You need to do the inside parts where you cannot see

@MadDogMark11 8 месяцев назад

I just completed rebuilding the front suspension and homed in on this area. Using a strip-it wheel and a Dremel I got rid of all the rust on the forward part of the floor pans. A rotary wire brush got rod of the rest. We never see any results of this stuff 5-10 years down the line! It’s expensive and pretty but does it actually work?👍

@peternelson2842 10 месяцев назад

Hi John. Have you tried lanoguard...I used it on my xj brilliant stuff it's also transparent...

@ToTheGarage 10 месяцев назад

Hi Peter👍 I believe Lanoguard to be a very good, Ecologically friendly and very easy product to use. However whilst it is probably excellent at preventing corrosive elements getting to and causing corrosion. Im not aware that it has any contents or ability to convert existing rust into anything else. (It may slow its progress though through oxygen starvation) I would happily use it as a protectorant on my car though. 👍

@Forecast25 10 месяцев назад

It caught my eye during the other day's video and kept bothering me every time the camera caught some view to the right in this video. It is that rust HOLE forming in the frame rail. Please consider addressing that.

@tafl-9198 5 месяцев назад

Can I use Hydrate80 followed by Elextrox or does that not make sense ?

@ToTheGarage 5 месяцев назад

there is no issue with doing that but the electrox would just be a rather expensive paint. its high zink content is intended to come into contact with bare metal and provide a chemical / gavanic protection (similar to galvanising). The hydrate 80 would be a barrier to that effect. (in my opinion)

@tafl-9198 5 месяцев назад

@@ToTheGaragethanks good point 👍

@garyvanremortel5218 10 месяцев назад

What's the carrier? Can it be thinned and sprayed?

@ToTheGarage 10 месяцев назад

wash brushes in water si im guessing its water based? certainly thin enough to spray as supplied

@1960livvy 6 месяцев назад

John - I'm surprised you didn't have the rubber bungs out and waxoyl the sill inner from both ends. When I saved my XK8 the sills had rotted out from the inside as most do so I used a Ton and a Half of Waxoyl for future protection ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-D6WjxFZfSis.html

@kjell-ovehjellbakk297 8 месяцев назад

This is NOT a good job, terrible!

@iamyourfuture808 5 месяцев назад

sorry, but you are a little naive if you believe that is a long term fix. That rust needs cutting out or at the very least getting back to good clean steel before applying your rust treatment. Bilt Hamber products are very good but you've done nothing more than temporarily slow the rusting process here.

@ToTheGarage 5 месяцев назад

I agree. Hence 'quick rust treatment'. Ie better than doing nothing, 👍