Тёмный

A Step-by-Step Guide to Setting Up the POW-LVM5K-48V-H 

PowMr Solar
Подписаться 4,2 тыс.
Просмотров 6 тыс.
50% 1

In this informative video, PowMr presents a step-by-step guide on how to set up the POW-LVM5K-48V-H solar inverter. Unlock the full potential of solar power with this easy-to-follow installation tutorial.
______________________________________________________________
👉: www.amazon.com...
Website
powmr.com/
Facebook
/ powmrsolar
Email:
support@powmr.com
See you in my next video! :)
⏰ Timecodes ⏰
=================
0:52 Main page
1:20 Exit from setting program
1:30 Output power source priority
2:45 Output frequency
2:56 AC input voltage range
3:21 Battery mode to bypass mode
3:48 Bypass mode to battery mode
4:08 Battery charging mode
5:13 Max. charging current
5:28 Battery type
6:20 Boost charging voltage
6:30 Boost charging duration
6:35 Float charging voltage
6:44 Low voltage cut-off voltage
6:50 Battery over-discharging delay
7:10 Battery undervoltage alarm
7:23 Battery discharge cutoff voltage
7:37 Battery equalization charge
8:16 Power saving mode
8:34 Overload auto-restart
9:00 Over-temperature auto-restart
9:17 Buzzer alarm
9:32 Output mode change alarm
9:47 Inverter overload to bypass mode
9:57 Max. AC charging current
10:13 Reserve
10:24 RS485 address
10:50 Under-voltage disconnect recover voltage
11:00 Battery recharging voltage
11:11 AC Output voltage
______________________________________________________________
1: PowMr 10KW Solar Inverter Unboxing
• PowMr 10KW Solar Inver...
2: How to choose the right solar inverter- PowMr
• How to choose the righ...
3: Detailed Solar Inverter Installation: A Step-by-Step Guide
• Detailed Solar Inverte...

Опубликовано:

 

4 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 32   
@remix381
@remix381 Год назад
Finally someone did a full explanation on how to setup your 48v all in one inverter. Thank you
@PowmrSolar
@PowmrSolar Год назад
Hi, thanks for your support.
@davemacdonald5106
@davemacdonald5106 Год назад
After install I get error code 10, what is it and how to fix
@PowmrSolar
@PowmrSolar Год назад
@@davemacdonald5106 this model?(POW-LVM5K-48V-H)
@davemacdonald5106
@davemacdonald5106 Год назад
@@PowmrSolar 8.2kw model
@davemacdonald5106
@davemacdonald5106 Год назад
do you have a video on 8.2kw model
@wisnu.agrasena
@wisnu.agrasena Год назад
POW-HVM5.5M please, including ct install and software config. Thx
@abitw210
@abitw210 9 месяцев назад
please make similar video for your older versions, many people already bought and tutorial would be really usefull
@PowmrSolar
@PowmrSolar 9 месяцев назад
Hi, can you send your model number? This is the older version.
@DavisOffGrid
@DavisOffGrid 11 месяцев назад
Good videos. Do you have one to setup the SPK5? I see one for configuring parallel connections, but not a general one.
@moneth08able
@moneth08able Год назад
Need installation video for this inverter
@PowmrSolar
@PowmrSolar Год назад
Hi, kindly send your problems to this email: support@powmr.com.
@dnv6911
@dnv6911 Месяц назад
Mam falownik PowMR 6,2 używam bez akumulatorów głównie do grzania wody w bojlerze za pomocą grzałki . Chciałem zapytać czy da się ustawić falownik tak żeby grzałka grzała tylko w momencie jak panele produkują prąd ? Bo teraz jak mam wpiętą grzałkę to widzę że jak panele nie produkują to ciągnie prąd z tauronu . Chce mieć tylko produkcję z paneli czyli jednym słowem jest prąd tylko jak panele mają produkcję .
@PowmrSolar
@PowmrSolar Месяц назад
We recommend that you connect the battery as Only solar is unstable.
@scottbrooks1242
@scottbrooks1242 Месяц назад
POW-LVM3.5K-48v Parameter #04 unable to hold 48v low voltage change to utility charging of batteries. Always defaults back to 43.6v and doesn’t work. I don’t want my batteries to drop that low in voltage. Please help!
@PowmrSolar
@PowmrSolar Месяц назад
Please send your problem to this email: support@powmr.com. Our technical staff will handle it for you.
@HLRbuckingCattle
@HLRbuckingCattle 4 месяца назад
How do you set up for AGM batteries?
@PowmrSolar
@PowmrSolar 4 месяца назад
Item 8 select GEL.
@ciprixdayana
@ciprixdayana 4 месяца назад
hello on my PowMr 1.6kw/2Kw 12Vdc inverter, there is an error Fault code 03, how to solve it
@PowmrSolar
@PowmrSolar 4 месяца назад
Fault code 03: Battery voltage is too high. Please disconnect the PV and mains power, connect the battery and load, and discharge the battery to 25V and then try turning it on with only the battery connected.
@mirceacraciun4091
@mirceacraciun4091 3 месяца назад
this inverter dosen't have SUB option?
@PowmrSolar
@PowmrSolar 3 месяца назад
Three output modes for this inverter(SOL UTI SBU)
@mirceacraciun4091
@mirceacraciun4091 3 месяца назад
@@PowmrSolar thank you Plecase recomand me an inverter 6.2kw for Europe with low mppt voltage 55-450v and sub mode
@PowmrSolar
@PowmrSolar 3 месяца назад
@@mirceacraciun4091 Kindly check out this model first: powmr.com/products/all-in-one-inverter-charger-6200w-220vac-48vdc-dual-ac
@sidbyron210
@sidbyron210 Год назад
Hey cna you help me? I'm having some issues with the inverter. I recently adquired one of this but in cloudly days the inverter is not chargin it looks like mppt is not making his work. My system has 4 panels and I have to play the setting 7 to get charge on cloudly days. I already sent email but I have not an answer yet. I'm looking if you have any firmware upgrade for this. Thanks!
@PowmrSolar
@PowmrSolar Год назад
this model(POW-LVM5K-48V-H)? May I know which email did you send it to?
@DorothyMartin-xu2dw
@DorothyMartin-xu2dw 6 месяцев назад
Do she come with that inverter
@robertdelgado9677
@robertdelgado9677 7 месяцев назад
How do I turn off the beeping noise
@PowmrSolar
@PowmrSolar 7 месяцев назад
may I know which model?
@chanmon7622
@chanmon7622 8 месяцев назад
❤❤❤🎉🎉🎉
Далее
If Your Portable Power Station Was On PowMr Steroids
8:19
How Many 12V Batteries for 3000W Inverter
15:26
Просмотров 171 тыс.
Beginner Guide to Go Off-Grid Using the Delta Pro Ultra
18:34