AAC Ultimate Cooling Package for a VW Engine!

Подписаться 35 тыс.

Просмотров 28 тыс.

50% 1

The heat is on, and its not even summer yet! We're about to leave for another BusBash and I want to make sure the engine stays super cool, so I'm installing another of Andrigs fancy gizmos. These are fixed cooling flaps that direct the air to exactly the right spots for maximum cooling. With the super fan and all the work we did to the tins we should be able to handle the heat with no problems!
www.andrigsair...
www.OldVolksTV.com
Order OldVolksTV Shirts here - teespring.com/...
Follow us on Facebook here - / oldvolkstv
Some VW Channels you should check out!
VolksAmerica Magazine - / @volksamericamagazine
VW Life - / @vwlifevw
Adventures of Kona the Bus - • VW Bus | MicBergsma
DuckmanCycles and VW Garage - / @duckmancycles
Mike FN Garage - / @mikefngarage
CT Moog - / @ctmoog
marcijunebug - / @marcijunebug
5150mxVW - / @5150mxvw
Classic VW Bugs - / @classicvwbugs
JW Classic VW - / @jwclassicvw
Haptic Garage - / @hapticgarage
VWJawbreaker - / @vwjawbreaker
Good Old Mike - / goodoldmike
Stop by volksamerica.c... to get your subscription to VolksAmerica and VolksMania magazines so you have something to read when your phone dies!
Music provided by soundstripe.com
CLZBTZKGIM7LX4GB
#OldVolksTV #VW

Авто/Мото

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 103

@russelltaylor140 5 месяцев назад

You’re not boring anybody by doing everything and showing us how as long as you’re doing it right which looks very good

@VWJawbreaker 2 года назад

Can’t wait to hear the results of the upgrades. Great stuff dude.

@OldVolksTV 2 года назад

Thanks! Motor should be going in today or tomorrow, then we can see how it does.

@gmd1417 8 месяцев назад

@@OldVolksTV Did these upgrades make the engine run cooler?

@Mikefngarage 2 года назад

That fan replicates the Corvair fan I think. IDK if the flaps are really going to do anything only if you have an original fan shroud with all the air directors in there. Probably would have made up a water vapor injector with compressor tank and nozzles around the fan intake. I may do that for my truck.

@OldVolksTV 2 года назад

The shroud is actually a German one, but it's had lots of welding and bondo. The flaps reduce the "swirl" of the air so it moves past the fins easier.

@tetra4411 2 года назад

Another mod I found works for me. I blew a valve cover cork gasket on a hot desert hwy. The engine needed to breath.. So I removed the oil filler cap and with a hose clamp and N-95 mask 😷 covered the oil fill hole. This gave a lot of extra heat breathing for the engine. Since then The engine runs cooler and I have not blown valve gaskets.

@OldVolksTV 2 года назад

Interesting. I wouldn't recommend too many miles with that cap off, even with the mask. Vented valve covers are easy enough to find or even make. That way you keep all the dust out of the oil.

@Mikefngarage 2 года назад

good road fix. breather kit would be the best answer. you need one if you have a bigger engine and driving it a bit faster on the freeway. all those RPM build up crank case pressure. Also best to redo the gearing on the car or bus. so the engine is not revving so high this will stop those things from happening. too.

@tetra4411 2 года назад

I have a Baja Bug. I mounted a 10” fan over the fan shroud, blowing fresh air into the fan intake and over the generator/ alternator. Cooling it down and providing plenty of un-preheated air to the engine. This has worked well for the long desert hwy drives and long hill climbs hwy.

@OldVolksTV 2 года назад

That's not a bad idea for a Baja! I've seen people do that with a small oil cooler, and that's bad news. But just a fan seems like it would help!

@andrigtmiller 2 года назад

Good luck on the trip, and can't wait to hear about it.

@OldVolksTV 2 года назад

The national forest was closed so we had to postpone it .

@lathropedition Год назад

I absolutely love this channel! New subscriber.

@OldVolksTV Год назад

Welcome! Thanks for watching!

@luisrivera3056 5 месяцев назад

Those are turning vanes, used in airconditioning ductwork to eliminate turbulence.

@vanzelstrestorations998 2 года назад

Those little ducts were factory fitted for a reason and many have been left off over time. They should be on every aircooled motor. These are a separate thing to the moveable thermostat flaps.

@michaelnagy4603 4 месяца назад

I like the cool tins or type 3 or Porsche lower cylinder tins ❤ what I run on my rail buggy

@brianchisnell1548 3 месяца назад

Stock is rock

@krzysztofkoodziej7976 2 месяца назад

Where to byu or how to modify the fanshroud for that rounded looks. I dont want to ruin airflow..

@charleslawrence7194 2 года назад

Good stuff. I'm anxious to see how everything works on the trip. Always enjoy your videos. Keep your body cool. Also looking forward to new t shirts. I wear my blue one everywhere.

@ardegaragem7283 4 месяца назад

Hi, This turbine that appears in the video is better than the other original model?

@Steve-ff7xj 2 года назад

Really like the new tech cooling mods, should have used button head allen screws for the louver inserts makes for a nicer look

@michaelbrind9222 3 месяца назад

most aftermarket shrouds are crap, VW knew what they were doing when they disigned it, and most of the crucial parts are left out including the thermostat, flaps, and proper direction vanes . and heat exchanger and decent seals on tinwork that isnt chrome tat.

@crackpotts5347 2 года назад

Fellas, I got to see these in person. If you don't have the stock flaps, you must have something to direct the air. I can't possibly explain the effects of not having, over having, but, it has to do with the Lumiere effect. Wind is chaotic and must be directed to be effective. Directed air has a large amount of force when focused, however, once it leaves the machine, it only has a small amount of focus but looses an enormous amount of energy. I can imagine that there are a lot of small eddies inside the shroud next to the inner and outer surfaces of the fan shroud which causes loss of energy. Bla bla bla, directed to be effective!

@OldVolksTV 2 года назад

Professor Tony!

@andrigtmiller 2 года назад

I have done tons of testing of the fan and fan shrouds, and what is interesting is how the fan itself actually causes the air to swirl inside the shroud. The air directional vanes in the shroud are complex, and what you see is that the 3/4 cylinder side has a lot of vanes in it to direct the air to that side, where there are only a couple on the 1/2 side, and that is because the swirl of the air is in the direction the fan turns, so the air wants to mostly exit on the 1/2 cylinder side. That's why I chuckle a bit whenever I see those center mount fan shrouds with no air directional vanes. They certainly won't cool both sides of the engine properly.

@crackpotts5347 2 года назад

@Andrig I absolutely believe you.

@denisonsmachado Год назад

Nice video. Denison from Brazil.

@jeffreybeman5806 Год назад

back in the day... 1978 ...the spring would bust and the flames would close and over heat the motors..bug ranch Norco ca

@robertorback1 9 месяцев назад

Looks good but are you not aware that a type 4 or later type 2 or a 914-4 oil cooler will fit the Dog house fan shroud if you widen the Dog house by 1" and that cooler is by itself good for a 2000cc 914 Porsche! I'm a retired VW PORSCHE AUDIE MECHANIC(FACTORY TRAINED ON THE AIR COOLED. YOUR VIDEO IS VERY IMPRESSIVE. WELL DONE GOOD LUCK REGARDS BOB

@OldVolksTV 9 месяцев назад

Thanks! I've seen the T4 cooler setup, it's pretty neat! I wanted to show a bolt on setup with easy to aquire parts for this build. The Andrig setup will work with the larger cooler, maybe I'll do an update and fit one. Thanks for watching!

@Rockettube1 6 месяцев назад

Thanks for sharing this, noted!

@AnzaValley Год назад

Just put a Mazda RX 7 oil cooler on it and it will run cool even at Johnson Valley in August.

@OldVolksTV Год назад

Is that a thing? I've never heard of that. Sounds interesting.

@michaelnagy4603 4 месяца назад

Very interesting ❤

@alexguerrero3675 Год назад

Update on the fan please how is it working? I'm really interested in one for my 2180

@OldVolksTV Год назад

I just got back from a trip. 3 hours of hiway driving, fully loaded for camping and pulling a camp trailer, with 85° temps. The head tin over #3 was 165° and the block was 180° . The fan makes some noise but it quiets down while cruising around 55mph. Overall I'm very happy. From what I hear he's making a new version that looks like a stock fan and is even more efficient. Worth every penny.

@Rockettube1 6 месяцев назад

Did you ever get one Alex? I'm interested as well.

@johnj2496 Год назад

Nice You could ditch the bolts for pop rivets

@torisings9058 Год назад

That fan has been out of stock for a while now. Anyone have any info on a possible eta. I signed up on andrigs site for notification when it becomes available. But I’ve been waiting to make some repairs on my shroud, in hopes that I can swap the fan at that time.

@OldVolksTV Год назад

I think he changed the design and has taken this style out of production. He has a new version that is closer to a stock style fan with upgrades and those are in production now. Should be available on the website soon.

@christophersustayta5974 6 месяцев назад

So how well does it cool and how much was your fan upgrade ?

@OldVolksTV 5 месяцев назад

Less than $200 in parts. It works extremely well!

@carlosgalarza9092 4 месяца назад

Send me the link the I can get that I live in Chicopee Massachusetts thanks 😊

@OldVolksTV 4 месяца назад

Andrigsaircooledtechnology.com

@branchsnapper2228 2 года назад

Cool

@marshallwebber9682 2 года назад

Well, that's 17 minutes of my life I'm not getting back.

@patrickmcneil2911 2 года назад

Love the videos, I always learn something when I tune in!! That is a really cool fan, looks like it will move a ton of air! Do you think it would work in a stock shroud? Thanks for sharing

@andrigtmiller 2 года назад

It fits any Doghouse fan shroud (introduced in '71). OEM, and all the aftermarket ones.

@patrickmcneil2911 2 года назад

Cool, thanks

@theslamer67 2 года назад

sweet vid cant wait to see how it all works and the results and i do not see his link

@theslamer67 2 года назад

I did not see his link to his video

@user-zd3zi6lk2x 2 месяца назад

I am interested in that crazy cooling fan ! Where do you get them ? Thank you

@OldVolksTV 2 месяца назад

They're no longer available. They were made by Andrigsaircooledtechnology.com , but they have a newer version that is far better.

@user-zd3zi6lk2x 2 месяца назад

Hey thanks for the super fast reply , really appreciate you ! I have 3 cases in my garage and am planning a 1600 "grocery getter" but not "stock " counterweighted Crank , HP rods , 110 cam . Always full flow case . I even throw in a "windage tray" to keep that pesky oil in the bottom of the case . My other build will probably be another 1835 like I built for my 1971 van , 100mph in a straight line , "freeway flier" cornering not so much 😂 Keep on bugging !!

@theslamer67 2 года назад

Hi what and we’re did you get all of this did not see the link thanks

@OldVolksTV 2 года назад

I thought I put it in the description, I'll add it shortly.

@skytopshop Год назад

Where can I purchase the flaps and the fan? I don’t see them on the link you shared.

@OldVolksTV Год назад

I believe he sold out of those fans. He's moving into a larger shop and should start production soon.

@mathewboyd3746 Год назад

Where did you find the fixed flaps? I have never seen them. Are you using CHT for temp reading?

@OldVolksTV Год назад

Andrigsaircooledtechnology.com has the fan, flaps, and several other upgrades. I'm using a laser to read the temps on various parts of the engine.

@gmd1417 8 месяцев назад

DID THESE UPGRADES MAKE THE ENGINE RUN COOLER?

@OldVolksTV 5 месяцев назад

Very much so. In fact, over the winter I noticed my engine wasn't getting all the way up to operating temps, so that's something to keep an eye on.

@ronjones977 Месяц назад

Hey brother did that stuff actually work? It looks really cool

@OldVolksTV Месяц назад

@ronjones977 it did. Engine temps dropped drastically. I hvent tried the newest version yet, but I hear it's much better.

@ronjones977 Месяц назад

@@OldVolksTV that's awesome bro thanks for getting back to me man I really appreciate it I love the videos

@andgate2000 Год назад

Always wondered how the stock design fans coped with a 2275 turbo....i guess it wont.

@OldVolksTV Год назад

A stock fan will work fine. If you get the RPMS too high they'll slip and cool less, and if you use a tensioner on the belt it won't slip. If it doesn't slip, it'll fly apart. That's why Berg started welding them. If you use a tensioner AND turn high RPMs you absolutely MUST run a welded fan. Or one of Andrigs fans, since they're lightweight and one piece they Han take the abuse.

@elp1stolero221 Год назад

Hi where can i buy one of those plastic turbine fans

@OldVolksTV Год назад

Andrigsaircooledtechnology.com but I believe he's sold out at the moment.

@soggz4246 Год назад

Why couldn’t you just use the originals and a thermostat? Really would like to know. All the best.👍🏾🇬🇧

@OldVolksTV Год назад

This setup is more efficient and lighter weight. In Texas we rarely have to worry about cold weather, our motors almost start iff warmed up 😂. The fixed flaps help direct the cooling air to the parts that need it most, which is better than the nothing that was in there.

@soggz4246 Год назад

@@OldVolksTV I guess you just rebuild them, when they do wear out, flaps or not. So you normally just ditch the flaps, anyway, then? As you say the engine is already warm…

@mikehammer4546 2 года назад

Cool video, where and how are you measuring the temp.

@OldVolksTV 2 года назад

I'll have an oil temp sensor at the stock pressure location and a head temp sensor on #3.

@sangtran-jc5wm Год назад

Where I can get the fan Plat and the tin part ???

@OldVolksTV Год назад

Andrigsaircooledtechnology.com

@jorgecaballero6566 4 месяца назад

Donde compro esa turbina

@OldVolksTV 4 месяца назад

Andrigsaircooledtechnology.com

@jamesprice1253 2 года назад

Were the lenk for fan kit. Thanks

@OldVolksTV 2 года назад

www.andrigsaircooledtechnology.com/

@75vw Год назад

So it’s been a year! What are the results!?

@OldVolksTV Год назад

Undecided. The motor all of this went on had trouble keeping the heads tight. When I had it running I noticed a significant drop in engine temps. Didn't quite make it to the summer heat. I'm running a 1904 now but it has a welded stock fan. I'm planning to move this cooling to the new motor soon to see what happens.

@christopherhenry5993 2 года назад

who welded a bicycle fender to that fan shroud?

@OldVolksTV 2 года назад

A buddy of mine did it many years ago.

@christopherhenry5993 2 года назад

@@OldVolksTV looks like something you would see in fresno

@jimmywilkinson9190 2 года назад

Before you give Gary his motor back ! RUN THE SH-T OUT OF IT ! Just kidding , yall should pack it up and take it with yall ?

@OldVolksTV 2 года назад

Ha. I'm going to give it a once over, fix a few leaks, change the oil, run the valves, etc. I'm glad to have had it but I'll be happy when the bus is running under its own power.

@tonylayne5726 11 месяцев назад

It's too bad they don't make these fans anymore.

@OldVolksTV 11 месяцев назад

I believe he's back up and running. He moved into a new house with a bigger shop and he's building up his stock.

@jameshorel1938 2 года назад

I don't believe those flaps do anything. The same amount of air is going through the same space. The fan looks cool though.

@OldVolksTV 2 года назад

It's hard to see on the video, but the "flaps" are bent slightly to direct the air in the right direction. They do the same thing as the stock flaps

@andrigtmiller 2 года назад

The flaps direct the air. The air flow coming down from is actually swirling somewhat, so that final flaps makes sure the air is directed where it does the most good. This was documented by Gene Berg many years ago with the thermostatically controlled flaps that came from VW. A lot of people get the used flaps, and either wire them open, or spot weld them so they stay open, but the original flaps are getting hard to come by.