Adding an Extra Air compressor Tank to your shop 

Thank you! brother

You are welcome!

Good tip! will do after my surgery

Man I love the ingenuity. But I seen a video on RU-vid of a compressor failure on a tank that looked way less rusty than that one. Pretty scary stuff. It was like a bomb went off. Hopefully yours is in good shape internally as the rust is impossible to see on inside of tank. Stay safe friend.

​@@michaelchristopher9444 not impossible at all, with a borescope.

Big thanks to you for bringing an old guy back into the game I was once well know for painting Corvettes 40 years ago, I still learn something new from you

No worries!

Pex is just great still the connectors were off brand at home depot just like shark bite

@@mustangrebuilder what psi are you running before the pex on your regulator? I was thinking of adding my regulator after the tank Before the Pex and regulate it to 150psi just to stay below the burst point on the Pex How long is your setup?

@@MartinMora92 150 is what mine is at, 30 feet to reg one side and 15 from compressor to extra tank in booth

Thank you too

Glad it was helpful!

pex is the way to go

Jamie I set up garage with copper pipe. After doing research on the pro's and con's of both, the quality and performance is basically the same. I chose copper over pex because I like the look of copper and the rigidity of metal and the set up gave me experience in sweating pipe. However, I do see the benefits of pex pipe as well and there is also the cost factor of cost. I bought my copper at a time in which copper was low priced and I grabbed it quickly. I'm of the same attitude as Mustang and an old dog to boot (68), so I've always looked at all options. However, I like the simplicity of how Mustang thinks....work smarter, not harder. Take care.

Thanks for sharing

I'm adding my old 60 gallon to my new 60 gallon tomorrow check out my current setup Cooper coil in a bucket of water from the hot side from the pump. My you tube Donnelly Detail & refinishing

I have seen a guy do it and will find the video for you

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XMXLn_phNe0.htmlsi=mVF_q65tiGKmBEb9

Bondo Billy, love it! Thanks for the lead!

Yes they are!

Called shark bite

I have double filters and I do use HB paint guns for shooting my industrial paint and I have Black widow for clear

tank to tank

Sorry old habit from my Hungarian Dad

Yep and why paint it with all the overspray it will get

The machine is good on lawns but two things 1. learn to feather your controls 2. Believe it or not 1/2 inch plywood works wonders on a wet or sensitive lawn

Thank you, sir

Trying to start a wood shop in my garage

My compressor comes on less

The tank was never outside and inspected also no rust ,it is faded red paint. The reason I was able to get the tank was the compressor failed due to a voltage spike .

Thanks! 😃

send info to mustangrebuilder@gmail.com for sticker and which one you want

Its oxidized red paint my friend

If its equipment I use Rust‑Oleum Specialty Farm & Implement Paint, with a hardener added to hold gloss and reduced with acetone

You are the man

@@mustangrebuilder The first road race I went to was at SIR in the late '60s, Titus drove a Shelby GT350 for the win.