Adjusting the 6000 for the Standard Hand Mike, or any new mike

Подписаться 278

Просмотров 12 тыс.

50% 1

This is probably not my best work, but I took the standard hand mike, beginning with all the setting flat and tuned it up for better sound.
I really need to spend some more time tweaking it, but I usually spend a couple of hours adjusting, recording, and re-tweaking a new mike in order to get it the way I want it. Then I live with it for a while and make some additional changes until it is the best I can get it. The Rag Chew Profile it is still a little "honky" with too much in the 500-1200 range. My hand mike seems to have a natural resonance there.
I present this as a concept tutorial just to let you see how some of the different EQ sliders affect the combined sound. The rest of it is up to you.
UPDATE: I played some more after posting this video, and discovered that the hollow resonance required me to drop some more of the 250 & 500 Hz and add some at 125 and 63 to get the sound I was working toward. Final EQ settings for my voice and preference on the Rag Chew settings on this mike are from left to right..... -5, -6, -7, -4, -1, 7, 5, -10. That is about as good as I can do without spending a lot more time on it.
Equipment:
Flex-6500
FHM-1 Hand Mike
SmartSDR v.1.5.1

Опубликовано:

18 окт 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@JayWalkerTexasRadio 3 года назад

I'm a bit late with my comment but I wanted to add my thought on the DEXP setting. With my 6600 I simply set it to eliminate any room noise. I'll key the mic, and without talking, raise the DEXP level to the point where the room/background noise just disappears. I've found by doing the DEXP setup that way, the action of the Downward Expander is a lot less abrupt and more like a "soft knee" gate. With my 6600 I use a variety of microphones and outboard processors depending on the mode and my mood. The "basic" configuration is a Sennheiser MD-421 microphone directly into the 6600. My "over the top" AM setup is a late 1950's vintage RCA BK-11 ribbon microphone feeding a Symetrix 528 processor, followed by an Aphex Compellor leveling amplifier into an Orban 9100B Optimod AM. As an AM/FM broadcast audio consulting engineer for over 40 years, I've learned two very important rules. Sound is subjective, and Less is More.

@nm9p 8 лет назад

UPDATE: Since update V.1.6.0, the Mic Profile was separated from the Transmit Profile. So when the video says to save to your Transmit Profile, you will now save it in a Mic Profile. This is actually a good change for SSDR, because it allows changes in other transmit parameters without needing to save additional Mic profiles. For example I have three Transmit Profiles that allow me to select Output Power of 100, 5, or 1 Watt, just for fun. Others will have a separate transmit profile for running with their amp which controls timing of the external switching ports. These parameters have nothing to do with Mic audio profiles.

@G0ogs 11 месяцев назад

Late to show but enjoyed your video , one thing I would say is I know your understanding of dismissing the lowest and highest frequencies as they are out of the tx bandpass, but in most cases they do have an effect on the adjacent freq,s, so it’s worth playing around with them.

@dfpolitowski2 Год назад

Thanks for the education.

@mikechristmas8313 8 лет назад

THANK YOU SO MUCH I HAVE HAD A REAL HARD TIME WITH THE EQ SETTINGS AND CANT WAIT TO GET INTO THE SHACK THIS WEEKEND TO GIVE YOUR IDEAS A TRY.. 73 VA3FS

@armallya 4 года назад

Thank you excellent video for audio setup.

@schoocg 6 лет назад

Great job. And thank you!

@stuartmcloughlin 7 лет назад

Great video - saved to favourites! :-)

@davidmcdonald354 6 лет назад

Nice information thanks

@W1AEX 8 лет назад

Nice explanation of the process Ken. It can be difficult to get reasonable audio from a hand microphone. I have found that a lot of hand mics using a plastic housing benefit from the addition of some cotton or other acoustic absorbing material to get rid of that hollow sound you mentioned. Excellent advice regarding "cut to sound better and boost to sound different" when tinkering with the EQ! Having worked you when you have the studio microphone attached I know how good you sound with that setup! 73, Rob W1AEX

@evetsmd 8 лет назад

Hi Ken....nice job...I follow on the Flex community as well but thought it important to comment on you Tube.....ur explanation makes it easy for the new user. I also use a PR22ut and a Behringer X1622USB mixer....using the mixer to feed 3 audio outputs into a set of studio monitors......on the mic side just the PR22 thru Aux Send to the Flex.....sure would like to learn more about how ur using ur mixer/Pr22 to feed multiple inputs.....now that would be a great video for hams (how To use a Mixer)......especially good for me! Hi Thanks for ur hard work! Steve 73 K3WKM

@frankkirschner 4 года назад

I may just be slow on the uptake, but I don't understand. What do I do if I don't have a transverter, which is what you were using? How do I get the rig into full duplex mode? I haven't been able to keep on slice in RX mode while the other is in TX mode. That's just the first 3 minutes of the video. I'm sure I'll have more questions when I get all the way through it. Thanks for the hard work you're doing for the ham and Flex communities. KF6E

@butch3715 5 лет назад

Ken - I followed your setup exactly and noticed on my Flex-6700 that my waterfall stops (locks in position) as soon as I push my PTT button (the band scope still works fine). Any idea why this is happening?

@redflametech 8 лет назад

good job, ken...73, w5xz

@alfredreeves7139 5 лет назад

Ken.. Enjoyed your video and it was very helpful. My only problem is that with your setup the audio I hear is delayed and sounds echo! Very annoying. What am I doing wrong?

@nm9p 5 лет назад

Nothing wrong. It is the usual latency delay from the software transmit processing and the internal delay of your second slice receiver. It takes some getting used to. But it is useful to hear in real time what your adjustments do to your audio. If you can’t get used to the delay, you can use just one slice and use the quick record and playback function to record your audio and listen to it after an adjustment.

@davidmontgomery3757 8 лет назад

What studio mic are you using Ken?

@nm9p 8 лет назад

Sorry, I haven't checked comments for a while. My "Studio" mike is a Heil PR22UT, available for about $107 when the sales hit Guitar Center. Its response is very similar to the PR-781 with a little less bass and not as much attenuation from the backside. It suits my voice well. There are many other mics in $75-$100 +/- range that are very nice, too. When I made the first three videos about mic EQ, I had a Behringer Q802USB mixer in the line as well, but recent changes to SSDR have made it unnecessary, because I can now tap into the Mic with DAX Mic Stream and record to the computer without a USB mixer. I also sold my Flex-1500 and do not need the mixer to distribute the Mic to a second rig. I only have the 6500 for HF now. My Mic profiles for the studio Mic have all been edited to include the +20 dB Mic boost that the mixer used to provide.

@K1OIK 8 лет назад

What is sad over 300 hams watched this and not one positive comment. Only 6 bothered to "like" it. Why do you bother for these self centered people?

@ifloss2690 4 года назад

Well Burt the way I see it is multifaceted ..some folks love their radio but because of life if they can hear it and actually have a qso that is all the time they have for radio. Other may not hear well enough and yet they are making contacts .there are so many other issues for people. It is like the cw operator that says unless you can copy 20-25 WPM in your head you shouldn’t be on the air. You have to start some where. Let’s do our best always learning and have fun with our hobby