Advanblack 8 Inch Speaker Lid Install with DS18 Pro Audio Speakers

Подписаться 109 тыс.

Просмотров 86 тыс.

50% 1

I'll show you how to install the new Advanblack 8" speakers lids and drill out the tweeter hole for your new speakers. Add some serious sound to your motorcycle with a set of these on your saddlebags. FIND THEM HERE bit.ly/2YNnPOg
www.advanblack.com
FOLLOW ME!
Facebook - / stevenleehousden
Facebook Group SIK Baggers - / 427595487637128
Instagram - www.instagram....
Twitter - St...
Steve's Favorite Motorcycle Must-Have Tools!
Master Hex/Torx Set - www.amazon.com...
Swivel Head Ratchet - amzn.to/3MYeMEw
Milwaukee M12 Ratchet - amzn.to/3VSR6W4
M12 Battery - amzn.to/3gweokl
M12 Charger - amzn.to/3Srrb53
Ratcheting Wrenches (Metric) - amzn.to/3CQanyS
Ratcheting Wrenches (SAE) - amzn.to/3Tt6iaY
Blue Medium Loctite (Your Bikes Best Friend) - amzn.to/3gwdK6p
FT LB Torque - amzn.to/3VON5SH
IN LB Torque - amzn.to/3F4wCUA
Vise Grip Plier Set - amzn.to/3TYZUs0
Motorcycle Funnel Set - amzn.to/3sP9HFz
Belt Tension Gauge - amzn.to/3FiiXco
Noco Boost Plus Power Bank/Jumper - amzn.to/3W1squO
As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
#sikbaggers #harleydavidson
🔴GET SOCIALISTIC
🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
🔗Instagram - bit.ly/2HwBZge
🔗My LINKTREE - linktr.ee/sikbaggers
🎵All Music is Licensed Through www.epidemicso...
VIDEO DISCLAIMER:
This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch.

Опубликовано:

17 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@jdkmboy 5 лет назад

SO... what you are saying is.. "It's a speaker lid?" Nicely done.. keep them coming!

@sikbaggers 5 лет назад

"technically" yes...a lid lol

@ryandrake4748 2 года назад

NOTE For newbies, it makes a cleaner cut with hole saw bit if you will cover the cutting area with masking tape.

@sikbaggers 2 года назад

Yeah..you can use masking tape...if your hole saw is fine toothed and sharp there is really no need for it though...doesnt hurt though

@faocs 4 года назад

Hi, I purchased DS18 CF8 hydro and they will not fit due to the bracket for the locking mechanism. Can you suggest a speaker that will fit?

@Hhhhhgggihgdd Год назад

Looks nice but my wife would stick her foot in the speaker , just a side note I recommend using lock tight for the screw holding the latch lever .

@sikbaggers Год назад

lol well we put grills on but did not show it in this video because they are not included with the lids

@reesetibbs2007 4 года назад

i have the crescendo un-8 i think I have to cut the basket to make them fit. or a spacer

@osobear157 3 года назад

I have been following all your videos and done alot of the stuff you have done on my roadglide only issue is What is the model number you use on the ds18 tweeter I order a pair and they look bigger than the tweeter hole. I am using the advance black 8" lids

@alldaymcclay2972 4 года назад

Steve, does the DS 18 fit in the lids without modifications to the lid hardware? I ask because I have some PRVs an part of the hardware in the lids is blocking the speaker from laying down flush on the lid. If the DS 18 will go in without modifications I buy them instead. Some guys told me no matter what speaker I get I will have to modify the hardware..is that the case?

@sikbaggers 4 года назад

I built custom spacer rings from osb for the ds18...I currently have the prv 8's in my road glide and on the one side I clipped off the the little metal tab that is on the speaker basket. I trimmed the plastic back on the edge of the hardware where the cable runs through it. It wont effect it..its just a channel for the cable and then I slid the speaker in at an angle and pushed it down...screwed it in and done. Any style 8" lid in the 14 up bikes will have that one touch hardware that will be in the way...I havent had a set of speakers yet that just dropped right in these or any other 8: lid that I didnt have to modify something. The ds18s went in easier but the grills would not fit down in the hole right so thats why we did the spacers.

@richardgoodwyn1388 4 года назад

Just installed my ds18 8s in advanblack lids perfect fit no modification needed.

@Chilllybob 3 года назад

Great videos and very informative thank you

@marcmo7138 5 лет назад

Nice job Steve.

@sikbaggers 5 лет назад

Thank you...much appreciated

@tomshuey5511 5 лет назад

Badass lids

@sikbaggers 5 лет назад

Thank you..much appreciated.

@phildofactor1 5 лет назад

Great video. Love the sarcasm. Music is nice too.

@sikbaggers 5 лет назад

Haha thanks man

@fuzzychevyman 3 года назад

You said you had custom speaker grills coming for your build. I'm doing the same setup, what speaker grills did you end up going with?

@SirAstaroth 3 года назад

So does the DS18 Pro Audio Speakers have any type of waterproofing for when I wash the bike?

@CarlosRodriguez-oq4hq 5 лет назад

Can you show how to do the wiring and amp installation?

@jayy2611 4 года назад

Hi I’m trying to find video where you mentioned the speaker lid grills

@sikbaggers 4 года назад

Im not sure which one it was..is there something I can help with?

@jayy2611 4 года назад

Steven Housden yes I’m looking for grill to fit the 8 inch lids for advonblack lids

@demetreehardison945 4 года назад

We’re can I get grills lids for the speaker

@billymclaughlin4803 3 года назад

Hey Steve, I came across an issue that I’m hoping you can help with. I just got the advanblack 8” speaker lids and I installed them with DS18 Pro audio speakers like you did but when my speaker grills arrived today (also ds18) the grill won’t sit flush on the speaker. Do you know of a speaker grill that will work? Thanks in advance sir

@MrBlowdro2006 3 года назад

Following

@c.b.jr.1539 2 года назад

I see you didn't get a response. Which grills did you find that work. I of course have the same issue. Thanks

@robertlaing2061 Год назад

I have heard guys are using spacers on the underside of the speakers to raise them up over the lip. I hope this helps. I’m probably going to have to do the same when mine arrive.

@Bdub750 5 лет назад

Hey Steven! Love the vids and the rest of the Advanblack products. So just to be clear the speaker lids should not be used as an oil and trans fluid catchment? LOL. On a serious note I ordered the 13 and down 4.5 bags; are there plans for lids for those bags?

@sikbaggers 5 лет назад

Lol..yes we are working on the 13 downs now

@jasonrutledge5224 2 года назад

DO you have a video that talks about the 8" lid install for a CVO with auto locks? 2020 CVO ultra limited.

@sikbaggers 2 года назад

they wont work with auto locks

@don-tj7su 4 года назад

Though it looks and sounds nice,what protects the speaker from weather and things hitting the speakers ?

@sikbaggers 4 года назад

You can get speakers grills to protect the speakers like any other speaker. As far as weather...get some lid covers from SKN IT. Its the nature oif the beast, give some take some...if you want bigger audio then you spend an extra 35 bucks and get covers in case you run into rain.

@telace1 Год назад

Do they sell the speaker covers...and does the set up leak into the bags

@sikbaggers Год назад

yes they have color matched, chrome , black covers and any speaker lid, including harleys will leak if you get enough rain hitting them..I recommend getting some lid covers from SKN-IT lid covers in case you get caught in the rain

@sergeantscuba7677 Год назад

Do you have lids for 2019- present Indians

@sikbaggers Год назад

No im sorry we dont.

@robertlaing2061 Год назад

Great video

@sikbaggers Год назад

thank you Robert!

@djshadow9269 4 года назад

will a set of Diamond HXM8 8" Full Range Woofer fit on those lids?

@nielsenl4171 29 дней назад

Can you color match my 2002 cvo screaming eagle brandy wine with flames

@sikbaggers 28 дней назад

No they wont do that color

@BavarianMotorHead 4 года назад

I wish they were angled more towards the rider's head. It looks like they're angled outward into the open air.

@sikbaggers 4 года назад

with the 14 and up one touch hardware this is not possible...trust me when I tell you, you can hear them. They are 8's and and a bullet tweeter. The right amp, its louder than you will ever listen to it at.

@thomasnavarro5365 5 лет назад

What keeps the rain from leaking in the bag. I’m that guy that always gets caught in a down poor. Lol

@deanbalouris330 Год назад

Steve, do you have a recommendation for waterproof covers for these lids?

@sikbaggers Год назад

Advanblack just released some a few days ago. www.advanblack.com/advanblack-saddlebags-lid-covers-for-14up-harley-touring.html

@deanbalouris330 Год назад

@@sikbaggers I’m looking for the ones for 8” speaker lids.

@michaelclarke9336 2 года назад

Steve, what amp are you using to drive your sp audio 8" speakers? (You're running 4 right?)

@sikbaggers 2 года назад

In the SG we have 3 amps in the fairing, all of them are cerwin Vega B52's However those are about to get ripped for an overhaulnot that they are bad..they are still going strong but im replacing them with Sound Digital EVOX 400.4's Before the EVOX they were pretty big and there was no way of getting 3 in my fairing but with their small size of the EVIX its possible now.

@billyrae1903 4 года назад

And you can colour match it

@shaneanderson8158 5 лет назад

Thanks for doing this video. Ordered mine in Sedona Orange a few weeks ago. How are those ds18 speakers?

@sikbaggers 5 лет назад

The ds18's kick hard man...I ran them for a few years before switching over to the SP Audios...Great price range too. This bike is running ds18 6.5s in the fairing and lowers and now the lids...2 cerwin vega B52 amps and hit 122.9 dB. Its louder than he will ever listen to it.

@shaneanderson8158 5 лет назад

Steven Housden what kind of crossover are you using with the horns. I'm not sure which 8's I want.

@sikbaggers 5 лет назад

@@shaneanderson8158 The tweeters will come with a bass blocking resistor you wire in...tune your bike like you normally would..the tweeters are jumped from the 8's

@tedrucker6091 5 лет назад

What kind of tweeters did you use and are those the ds18 elites?

@tedrucker6091 5 лет назад

@steven housden

@bedrock6344 4 года назад

will these work with CVO bikes with powerlocks?

@davidrutherford1100 4 года назад

how big is the tweeter circle above the 8??

@RydinginStyle72 Год назад

Whatever you do don't try to put the speaker in first. It's been an hour assembling the speaker and grill and can't get the latch assembly in....

@deondavis344 4 года назад

Will they work on a 2020 Indian Chieftain dark horse

@sikbaggers 4 года назад

these are made for the HD saddle bags

@brettcowgill8016 4 года назад

Can you put 14 lids on a 2011? Don’t look like a hard conversion but not sure about the measurements

@sikbaggers 4 года назад

yes you can if you change the bags and hardware with it. You cant put just the lids on the 13 down bags though. The whole system has to be changed to the newer style and then adjust your front bracket to fit the newer bags ..watch my video here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LcNaO-r0Kkc.html

@kmohrmann2491 5 лет назад

Great video. Do you have any of the speaker lids in stock?

@sikbaggers 5 лет назад

They are in stock not painted. You can order them raw and have the paint done by someone else. All other colors need a 30 day lead time on paint. Here are the 14 up lids www.advanblack.com/harley-parts/harley-saddlebags-parts/saddlebag-lids-covers/14-saddlebag-lids/8-speaker-lids.html

@kmohrmann2491 5 лет назад

Got it..., Thanks

@Bill-ck3lo 5 лет назад

Nice vid man! Do you sell those sweet liners or did you buy them somewhere?

@Bill-ck3lo 5 лет назад

After checking out your website, I answered my own question. Nice Add-ons!

@sikbaggers 5 лет назад

@@Bill-ck3lo Hey Bill... lol yes sir we sell the liners in a few colors. Love them man...great addition to the bags and the tour packs.

@superduty131 5 лет назад

LOL....Steven you had me laughing out loud! 😝 I've been watching your videos from the first and by far the best yet. I believe I know what you are referencing! Good job!

@Kenleighsway 5 лет назад

You think you guys will make some for 6.5 inches?

@sikbaggers 5 лет назад

I dont think thats in the plans..we do the 6x9, dual 6x9 and 8 inch....I dont forsee a 6.5 lid coming

@tedrucker6091 5 лет назад

@@sikbaggers I got the 6.5" DS13 for the front... Did you get rid of the speaker pod?

@sikbaggers 5 лет назад

@@tedrucker6091 no...for the ds 18 all you need to do is trim out the re enforcement pieces inside the pod..i just dremel them out..no need to cut a hole or delete the pods..i use a dremel tool and a cut off bit...score it and break it out with needle nose pliers.

@bobcalhoun3225 5 лет назад

Did a search on the site for 8” speaker lids zero results what gives?

@sikbaggers 5 лет назад

The link is in the description... check it out here www.advanblack.com/harley-parts/harley-saddlebags-parts/saddlebag-lids-covers/14-saddlebag-lids/8-speaker-lids.html

@BeingJermaine 5 лет назад

Do you have bags that fit a 2003 Yamaha Road Star 1600 midnight?

@sikbaggers 5 лет назад

We do not make anything for Yamaha at this time.

@greggriffin3242 3 года назад

Hey Steve, what ds 18 did u go with

@sikbaggers 3 года назад

These were the Pro gm 8 but they are a mid range speaker and not a mid bass..you are better off going with a mid bass 8 and a tweeter and ds18 does not make a mid bass 8 that will fit in these lids..the ones they have called the troublemakers will not fit. Id suggest looking into PRV or Ground Zero for the 8's

@terencebigt3825 2 года назад

Are these lids made for a 2012 Roadglide?

@sikbaggers 2 года назад

No these are for 14 and up..You can add the 14 up and bags, lids and hardware and mount them to your 09 to 13 model. but you have to do it all...bags, one touch hardware and then the lids with a small modification to the front mounting bracket.

@terencebigt3825 2 года назад

@@sikbaggers oh wow! Okay 👌

@davekemp6573 4 года назад

Thinking about this setup... Does it have good bass? I have the 6x9 lids and they have no bass.. and these are the DS 18 elites right?

@sikbaggers 4 года назад

It will have decent bass if you use the mid bass versions....You wont be able to hear any bass going down the road...only sitting still. So chasing heavy bass on a motorcycle wont happen...if you want good low end though stay with a mid bass speaker as the actually sub woofers wont fit in the lids.

@davekemp6573 4 года назад

@@sikbaggers thank you. I looked at the Marine DS 18 speakers today. Talked to one of the reps at the company.

@VinhNguyen-cs2ny 2 года назад

Tkhs for sharing I have a

@VinhNguyen-cs2ny 2 года назад

I have a question? The Grill of speaker I need to buy separately?

@joshpickett7984 Год назад

Anybody know what size tweeter it’ll take?

@sikbaggers Год назад

any 1" bullet tweeter ..most speaker companies make one ...however it will need to be one with the set ring...not the ones that are kind of square bodies with 4 screws..those wont work..the one inch refers to the voice coil not the size of the speaker...it needs to be like this one amzn.to/3W3n429

@Ta53508 3 года назад

No grill covers?

@sikbaggers 3 года назад

Advanblack is currently working on grill covers but youll be hard pressed to find any Pro Audio speaker that comes with a grill...there are several on the market but they pretty pricey...the advanblack ones will be out soon and you can get them color matched if you want

@brianmccollum69 5 лет назад

do you or will you make those for 2003 ultra classic

@sikbaggers 5 лет назад

I do not think we will go that far back far

@brianmccollum69 5 лет назад

@@sikbaggers well damn

@user-ng1ol2ny7o 5 лет назад

No grill for speakers?

@sikbaggers 5 лет назад

No...most pro audio foesnt come with grills ...there are a ton of shops that do custom grills for 8s. We cannot make a grill thats guaranteed to fit every speaker.

@jazznjayy 3 года назад

what size horns

@sikbaggers 3 года назад

1" Titanium bullet tweeter...alsmost all manufactuers of pro audio speakers make this speaker.

@duke9173 5 лет назад

Do you seriously sell them now in Legend blue Denim? If so I’m in trouble. John Maxwell just dropped a video on swapping the head unit in 18’ and older bikes to the GTS. My poor wallet is about to get KO’d.

@sikbaggers 5 лет назад

haha yes sir...I saw Johns video...good stuff!! ..here is the link ...please select your color from the drop down menu www.advanblack.com/color-matched-harley-parts/legend-blue-denim-harley-parts/advanblack-color-matched-8-saddlebag-speaker-lids-cover-for-harley-davidson-touring-14-19.html

@anthonykimble1080 3 года назад

So I am still lost. Can you use that as a toilet since it has a hole..if I am.riding the road..and inhave to 💩 you can use that right...lol.joking keep it up looks good

@VJ-uy7jg 4 года назад

Any lids for Indians?

@joelreyes9166 5 лет назад

It’s a speaker lid

@eugenestump111 5 лет назад

46 yrs old ? Dead I hear that right - I figured late 50’s

@sikbaggers 5 лет назад

Lol....damn...nope...46

@eugenestump111 5 лет назад

Rode hard and put away wet lol

@eugenestump111 5 лет назад

Steven I enjoy your videos and put on extended bags and fender and your vids helped me out! Keep up the good work sir!

@sikbaggers 5 лет назад

Thank you bro..much appreciated!

@eang9978 3 года назад

All that $$ for the lids should have had the tweeter hole cut out to standard diameter

@sikbaggers 3 года назад

you havent done much research on 8 inch lids have you? no 8 inch speaker lid on the market has them cut out. There is no "standard" as the one inch bullet tweeters come in various mounting styles..some have screws, some have speed rings. Some guys dont even run the tweeters. Would you like two lids with holes in them? Doesnt make much sense does it... 479 for direct competitors lids that are also not drilled..not painted and not even ready for paint, need butt tons of work to prep for paint ...or 499 for these, ready to install, all YOU have to do is drill a simple hole. come on man...take 5 minutes and put in some work customizing your bike. Good luck finding 8" lids color matched, pre drilled and for that price. Let me know how thats going for you.

@BettaThanBe4 4 года назад

It's gSpeaker lid! LOL

@sikbaggers 4 года назад

huh?

@gbodyaddict2452 5 лет назад

So you can use it as a step and this is not a speaker lid...got it

@sikbaggers 5 лет назад

lol...yep..exactly!

@michiganborn8303 5 лет назад

You really had people stand on those? Were they sober?

@sikbaggers 5 лет назад

Yep...they stood on our parts and broke them trying to say they were cheap and fiberglass was better than abs,..well ..dont stand on them..who does that? lol

@michiganborn8303 5 лет назад

@@sikbaggers drunk people stand on them because if you have the IQ to think these would support the average weight of an adult male, then maybe they shouldn't be riding a motorcycle with airbags.

@leonjrich 5 лет назад

So $500 for a lid? Well damn for $500 they should be able to be used as a truck ramp. That is just for the plastic lid, no webbing or anything then you have to cut it yourself for the tweeter. Damn for $500 bucks what kind of profit are you guys making? Get a Harley they said, spend your retirement on it they said. LMAO.

@sikbaggers 5 лет назад

Yep...its an expensive hobby. You can get the competitors lids for 500, unpainted and take about 15 hours prepping them for paint , that what it takes to make sure they dont pin hole when you paint, and then have them painted. Cost is roughly 700 after paint...painted for 500 ready to put on your bike isnt a bad deal. Agreed, still pricey...but what on your HD isnt?