Advanced How to Crackle Tune with Kpro 

Glad I could help

Christos Mazmanidis I asked him recently and he replied saying soon maybe next week

Next week

Thanks - Will do, have some more that'll be coming out soon

for sure - i can include that in an upcoming video

Thanks!

Im doing it for Kpro first - if there is enough interest i can do for ktuner as well - I should have the kpro video out soon

Orange Peel I wouldn’t say no

Nvm, I fixed it. Just set the output control in nitrous 1 to evap vent.

Hi. I hope you mean VTP not VTC. You need to uncheck the “vtec oil pressure switch” in the vtec options. If you use the VTP wire for this.

@@tuningbynick I have already achieved it, thank you very much, avia that disconnecting the vtec oil pressure switch from hondata, charging the flash and then cutting the cable, if you cut it before indicating to hondata that you want to turn it off, you create the fault. Now my question is, can I have a problem for having the vtec oil pressure switch disconnected, the cable that is cut that I suppose that goes to the switch should connect it to ground or it simply remains loose, my model is a civic ep3 k20a2. Thanks. A hug friend. Greetings from Spain.

yes - pretty much the same process - just need a kpro or a ktuner

Check out the video at about 6:40 - Technically its not important what VTP is showing. What's important is if your chosen input is responding - Watch how mine responds when i test it in that section of the video - When i test it, my input shows on and VTP shows off

Technically you could try that - You would have to wire in the clutch switch to the ECU ad a ground input because on RSX its not wired to the ECU from factory

Yes - Technically any switch can be used, you just need to make one one goes to the ecu and one wire goes to ground

im working on the 2 step video - it will be the next one

Sam Han yes exactly. Sorry I didn’t do a better job explaining that

Tuning by Nick That was a great video. I just needed clarification on that part.

so i used B9 and i get error code p1259

Turn off the error check for the VTEC pressure switch

shoot me an email and we can discuss - nick@tuningbynick.com

you just need to disable that code

Yes it can

@@tuningbynick do you have a contact email?