You drove me nuts when you used the term “alligator” clips but showed a binder clip. Alligator clips have teeth and would mess up your project. By the way, I use old credit cards cut into half inch strips under my binder clips to keep them from leaving an annoying mark on my leather. The pin clips are a brilliant innovation, but they can be a bit pricey. Buckle Guy sells them for $2.95 each. That’s probably worth the price, but I’m going to try butterfly clutch tacks as well. Butterfly clutches are the inside of tie-tacks and enameled souvenir pins. Jewelry supply stores and web sites sell them sort of in bulk. I have a number of old “military” insignia pins with butterfly clutch backs I can try can try before I start shopping on a jewelry supply web site. I will probably try some pin clips whether I like the price or not.
I have both clear and Black Tokonole. I mix the Tokonole (50/50%) with water and put it in a tiny little marker body with a foam tip. That way I get a smooth layer of Tokonole on my edge without having excess go all over the place. (the marker is smaller than the Buckleguy marker bodies). It works.
Thank you to the team at Corter Leather! You're my #1 channel for leather crafting and you continue to be an inspiration to me as I dig deeper and have fallen further in love with this hobby over the last year! Thank you so much!
So I have to ask this! The stitching chisels/pricking irons you’re working with buckle guy on when will they be available! I definitely want to get a set!
You are one of my favorite leather workers by far! I love that you still do everything by hand! So many are using machines and bell skivers - nice for the “bigger guys’ that can afford it and have the workload. But for the smaller hobbyists it’s great to see the quality things that can be done all by hand! If I could afford it - I would love to attend a workshop of yours if you do go ahead with that 😊😊
Thank you for these tips, especially the folding at the end. A real game changer! On tip from my side with the toconole, for a second pass use beeswax and rag it with some canvas. This really brings out a shine.
Just thought I’d let you know that those clips are called “binder clips” and not alligator clips. Alligator clips are usually small clips with long serrated jaws and are often used by electricians.
Hi, what you have been calling 'alligator clips' are generally known as 'binder clips.' Alligator clips are different beasts, with long, tapering, serrated jaws. They would really mess up leather.
Yes! I was thinking the same thing. I work with electronics in addition to leatherwork and alligator clips are totally different and will ruin leather! Luckily he was actually using binder clips not alligator 👍🏻😬☺️ I love this guy’s videos!
For burnishing the edge i made some burnishing attachments that fit into a rotatary tool or dremel,and burnish the leather only in one direction which lays the fibres down very well . I have done it with and without putting a substance on the leather. The edge comes out very smooth and shiny.
I just felt so much joy watching the bifold wallet close at a curve at the end. I'm 100% doing this from now on and I'm also totally sold on those pins
How are you able to prick/punch the holes for stitching after gluing up the shell and lining with that bend in the middle? Thanks for the helpful tips.
Love all your videos! Just want to point out that alligator clips look like an alligator jaw, with teeth. Those are binder clips. Thanks again for all the great tutorials!
I have only been playing with leather for a short time and it's because of your videos. Thank you! I have started selling wallets and recently I have been wanting to find out how to get the slanted stitching on both sides of my project. Do I have to purchase reverse stitching chisels, or is there a specific method to achieve this? If you have already covered this and I missed it, a link would be greatly appreciated. Thanks again!
this glueing folding technique is such an eye opener. i am going to try that. thanks a lot for sharing 👍👍👍 on the side note, you can actually get tokonole in black colour too. i sometimes use it when I am lazy to dye the edge 1st. still useful to have.
Quick tip on burnishing chrome tan: if canvas doesn't work, use your wood slicker. I use mostly oil tanned leathers and you CAN burnish them with tokonole, however canvas will not do it on most of them, it just rubs and frays the fibers.
I live in China, probably where your pin clips are manufactured. They have been available for quite some time over here, and I have used them on many projects. Although they do an EXCELLENT job, they are quite delicate and might not last very long. The problem lies similarly with anything so delicate....They tend to break at their weak points. The "pin" part has a washer at the end of it that is welded onto the end of the pin. With repeated use, this welded joint comes apart at times. The knurled, spring-loaded part also can come apart, rendering it useless as well. Tip: order more than you think you will need because some will break. I ordered ten and three are now bad. Having seven seems to be more than I need for most projects.
@@bfinney479 At USD2.95 each, I think everyone should know the pros and cons of them. I am an engineer and cannot find an good way to repair them as they break. Buckleguy's products might be of better quality than mine though.
Have you ever tried drying wet formed leather in a low heat oven? I have been able to get wet formed trays super hard, and they still are bendable, but not without serious effort. Dry in about 30 mins ( I have 0 patience) 55˚c (130˚f)
Hello! I am your subscriber from Ukraine, tell me what glue you use in your work and where you can buy fixing clips to match the seams. Thanks in advance!
I don't know how to reach you so I'm just leaving a comment here that the self-sealing punching boards are getting banned here and there around the world. This is because the plastic softeners are major endocrine disruptors. What I mean to say is that your punching boards are polluting your environment with plastic softeners - they leach - and can be a significant contributor to your panic disorder.
Hey There, I was wondering, it's something that might be controversial to ask, but what alternative to real leather would you use? Do you have any experience with vegan leather? (Pine)apple, cactus etc?
Another excellent video! Do you have any tips for clean, fast trimming after gluing a curved bi-fold? I find trimming those long edges on wallets tricky around the curve, but nothing that a LOT of sanding won't fix :)
What was that beautiful blueish leather on that bag with the feet? As an FYI, they make those pin clip things in longer lengths. My hands aren't so good with the tiny ones.
I've never been able to work up a shine that lasts with toko. Looks fantastic, but after a day in the pocket, that edge is dull (but still smooth). I find that using Columbus wax applied with an electric heat creaser after the initial took/sanding makes for a more lasting shine on the edge. Love these tips!!
do you still sell the bifold wallet kit? i would love to buy it and make it for my boyfriend since he needs a new wallet desperately! and i want to make him one but i dont have any tools or leather...plus im a college student lol so i dont really want to spend so much money on materials when the kit is so convenient!
I like how you mentioned that Tokonole includes acrylic resin. Not knowing that, I actually started using acrylic based leather sheen instead of tokonole or gum trag. It's the same deal. Small dab along the edge, let it dry slightly and your wood burnisher will burnish it very fast. Buff it out with fine sandpaper do it again and then wax it. You can burnish any leather with acrylic based sealers.
Love your videos! I've been watching for a long time. That tip you shared at the end about putting a liner in a bending shell, WOW!!! That was so simple, I feel so stupid I never thought of that! LOL Thank you so much for sharing.
At 5:10 when you pull the clips apart you seem to use a bit of force. The end of the clip should have a little spring in it, just pull that and it slips right off
The link is in the video additional description. The paint markers are from buckleguy. If you just want to make black edges? Sharpie or Edding in Germay sell markers with large tips like the one shown here. I use them for black edges. Is the paint in those leather dye? I have no idea but it works for me.