Known brands this flex plate is sold under is ATP on Amazon and eBay. It’s unknown at this time if it’s available labeled under other brands or from other sellers without mentioning a brand.
Always measure your installation depths and converter clearances.
Converter clearance is 1/8” to 3/16” from flex plate to converter with converter fully seated in transmission.
Converter is fully seated when mounting location measures 1-1/16” from straight edge across bell housing.
From machined rear surface of block to leading edge of starter ring gear will be 13/32”(1/32” more than 3/8”) this will vary, the converter mounting location is the critical location, but harder to easily measure. This is just a reference to quickly see if there is an issue should you suspect one.
With this flex plate installed, that measurement is 1/2” and had zero converter clearance. This will wipe out the transmission pump, damaging transmission, converter, and could potentially damage engine. Do not run a flex plate with manufacturing issues. Always measure your clearances and mock up your parts before assembly to verify.
14 окт 2024